Add support in HSIC peripheral(device)
over SPS.
Only one USB core can be use - currently HSUSB
is enabled by default.
To enable HSIC core defconfig file should be changed.
Change-Id: I256aecd9e6dfd8bfd71719c32beed8b24225e11c
Signed-off-by: Ofir Cohen <ofirc@codeaurora.org>
Upstream has changed the clock voting api from a single api that must
be atmoic context compatable, to a split api with atomic and non-atomic
components. Migrate to the new api as the old one is deprecated and
will be removed soon.
Change-Id: I5e2eaad78728a8fb9e10e18d8fd49bbec67cb40e
Signed-off-by: Yan He <yanhe@codeaurora.org>
Remote spinlocks are needed for targets that share the SSBI2 controller
with other processors (i.e. modem). Targets that have the PMIC Arbiter
are not impacted because the hardware handles the arbitration of the
different software masters.
Change-Id: I3ffd41d7d259e0745ff4d03cd99d5c4bdbc94fa6
Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org>
Add checking of null pointer and array index boundary
Change-Id: I5a8d044af791897c7e728d0a870069b1c7b24acb
Signed-off-by: Yan He <yanhe@codeaurora.org>
USB BAM driver to support BAM-to-BAM
USB<->Peripheral transactions.
Change-Id: Ib49a41f5dcdccb6f6bff2492fa64ead40f18b870
Signed-off-by: Ofir Cohen <ofirc@codeaurora.org>
* common/android-3.0: (570 commits)
misc: remove kernel debugger core
ARM: common: fiq_debugger: dump sysrq directly to console if enabled
ARM: common: fiq_debugger: add irq context debug functions
net: wireless: bcmdhd: Call init_ioctl() only if was started properly for WEXT
net: wireless: bcmdhd: Call init_ioctl() only if was started properly
net: wireless: bcmdhd: Fix possible memory leak in escan/iscan
cpufreq: interactive governor: default 20ms timer
cpufreq: interactive governor: go to intermediate hi speed before max
cpufreq: interactive governor: scale to max only if at min speed
cpufreq: interactive governor: apply intermediate load on current speed
ARM: idle: update idle ticks before call idle end notifier
input: gpio_input: don't print debounce message unless flag is set
net: wireless: bcm4329: Skip dhd_bus_stop() if bus is already down
net: wireless: bcmdhd: Skip dhd_bus_stop() if bus is already down
net: wireless: bcmdhd: Improve suspend/resume processing
net: wireless: bcmdhd: Check if FW is Ok for internal FW call
tcp: Don't nuke connections for the wrong protocol
ARM: common: fiq_debugger: make uart irq be no_suspend
net: wireless: Skip connect warning for CONFIG_CFG80211_ALLOW_RECONNECT
mm: avoid livelock on !__GFP_FS allocations
...
Conflicts:
arch/arm/mm/cache-l2x0.c
arch/arm/vfp/vfpmodule.c
drivers/mmc/core/host.c
kernel/power/wakelock.c
net/bluetooth/hci_event.c
Signed-off-by: Bryan Huntsman <bryanh@codeaurora.org>
Add new APIs which facilitates the setup of BAM-to-BAM connections
in client drivers.
Change-Id: Id6653961c3125bcc15b31a9c4061e76d927ae2b2
Signed-off-by: Yan He <yanhe@codeaurora.org>
sps_disconnect() calls mutex inside spinlock protected code, and thus gets
the warning "sleeping function called from invalid context". Change
spinlock to mutex in sps_disconnect().
Change-Id: Ied30595f20d0f5976d53575138b072ba251fc10e
Signed-off-by: Yan He <yanhe@codeaurora.org>
Client drivers of SPS driver will vote for dfab clock when it is
needed and relinquish the clock when it is not needed.
SPS driver only votes for dfab clock when it configures BAM-DMA
and relinquishes the clock after that.
Change-Id: I46a03633069a30f73b5159545c21e300140c5e6e
Signed-off-by: Yan He <yanhe@codeaurora.org>
commit 78a7539b881eb557494a7c810625c0307b27296c upstream.
Some samsung latop of the N150/N2{10,20,30} serie are badly detected by the samsung-laptop platform driver, see bug # 36082.
It appears that N230 identifies itself as N150/N210/N220/N230 whereas the other identify themselves as N150/N210/220.
This patch attemtp fix#36082 allowing correct identification for all the said netbook model.
Reported-by: Daniel Eklöf <daniel@ekloef.se>
Signed-off-by: Thomas Courbon <thcourbon@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ssbi controller in FSM9xxx is slightly different for rest of msm
arch. The address mask and shift is different. Ported FSM9xx specific
changes from i2c_ssbi driver to msm_ssbi driver.
Change-Id: I0b66ab3ee785d678fb0cd586d145663365dc41b3
Acked-by: Kaushik Sikdar <ksikdar@qualcomm.com>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
improvements include:
1> avoid unnecessary string operation in ISR
2> enable detailed debug info output at runtime
3> use unlikely() macro to improve success of branch prediction
Signed-off-by: Yan He <yanhe@codeaurora.org>
When client drivers use spinlock and embrace SPS APIs that use mutex,
scheduling error may happen. Use spinlock for these SPS APIs instead.
Signed-off-by: Yan He <yanhe@codeaurora.org>
commit 49979d091d1847823c064301da1ec173619ddd92 upstream.
The code was completly broken, and should never had been sent
to the kernel. That's what happens when you write code without
hardware to test it.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[ 191.310008] WARNING: kmemcheck: Caught 32-bit read from freed memory (f0d25f14)
[ 191.310011] c056d2f088000000105fd2f00000000050415353040000000000000000000000
[ 191.310020] i i i i f f f f f f f f f f f f f f f f f f f f f f f f f f f f
[ 191.310027] ^
[ 191.310029]
[ 191.310032] Pid: 737, comm: modprobe Not tainted 3.0.0-rc5+ #268 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h
[ 191.310036] EIP: 0060:[<f80b3104>] EFLAGS: 00010286 CPU: 0
[ 191.310039] EIP is at hp_wmi_perform_query+0x104/0x150 [hp_wmi]
[ 191.310041] EAX: f0d25601 EBX: f0d25f00 ECX: 000121cf EDX: 000121ce
[ 191.310043] ESI: f0d25f10 EDI: f0f97ea8 EBP: f0f97ec4 ESP: c173f34c
[ 191.310045] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 191.310046] CR0: 8005003b CR2: f540c000 CR3: 30f30000 CR4: 000006d0
[ 191.310048] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 191.310050] DR6: ffff4ff0 DR7: 00000400
[ 191.310051] [<f80b317b>] hp_wmi_dock_state+0x2b/0x40 [hp_wmi]
[ 191.310054] [<f80b6093>] hp_wmi_init+0x93/0x1a8 [hp_wmi]
[ 191.310057] [<c10011f0>] do_one_initcall+0x30/0x170
[ 191.310061] [<c107ab9f>] sys_init_module+0xef/0x1a60
[ 191.310064] [<c149f998>] sysenter_do_call+0x12/0x28
[ 191.310067] [<ffffffff>] 0xffffffff
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This reverts commit a3d77411e8,
as it causes a mess in the wireless rfkill status on some models.
It is probably a bad idea to toggle the rfkill for all dell models
without the respect to the claim that it is hardware-controlled.
Cc: stable@kernel.org
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some newly added drivers do not set backlight type, as a result
/sys/class/backlight/<backlight>/type shows incorrect backlight type.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Yin Kangkai <kangkai.yin@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Handle events 0x4010 and 0x4011 so that we do not pester users about them.
These events report when the thinkpad is docked/undocked to a native
hotplug dock (i.e. one that does not need ACPI handling, nor is represented
in the ACPI device tree). Such docks are based on USB 2.0/3.0, and also
work as port replicators.
We really want a proper dock class to report these, or at least new input
EV_SW events. Since it is not clear which one to use yet, keep reporting
them as vendor-specific ThinkPad events.
WARNING: As defined by the thinkpad-acpi sysfs ABI rules of engagement, the
vendor-specific events will be REMOVED as soon as generic events are made
available (duplicate events are a big problem), with an appropriate update
to the thinkpad-acpi sysfs/event ABI versioning. Userspace is already
prepared to provide easy backwards compatibility for such changes when
convenient to the distro (see acpi-fakekey).
* Event 0x4010: docking to hotplug dock/port replicator
* Event 0x4011: undocking from hotplug dock/port replicator
Typical usecase would be to trigger display reconfiguration.
Reports mention T410, T510, and series 3 docks/port replicators. Special
thanks to Robert de Rooy for his extensive report and analysis of the
situation.
http://www.thinkwiki.org/wiki/ThinkPad_Port_Replicator_Series_3http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Series_3http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3_for_Mobile_Workstationshttp://lenovoblogs.com/insidethebox/?p=290
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Claudius Hubig <claudiushubig@chubig.net>
Reported-by: Doctor Bill <docbill@gmail.com>
Reported-by: Korte Noack <gbk.noack@gmx.de>
Reported-by: Robert de Rooy <robert.de.rooy@gmail.com>
Reported-by: Sebastian Will <swill@csail.mit.edu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
data is not freed in the error case of
compal_probe().
Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Handle some user interface events from the newer Lenovo models. We are likely
to do something smart with these events in the future, for now, hide the ones
we are already certain about from the user and userspace both.
* Events 0x6000 and 0x6005 are key-related. 0x6005 is not properly identified
yet. Ignore these events, and do not report them.
* Event 0x6040 has not been properly identified yet, and we don't know if it
is important (looks like it isn't, but still...). Keep reporting it.
* Change the message the driver outputs on unknown 0x6xxx events, as all
recent events are not related to thermal alarms. Degrade log level from
ALERT to WARNING.
Thanks to all users who reported these events or asked about them in a number
of mailing lists. Your help is highly appreciated, even if I did took a lot of
time to act on them. For that I apologise.
I will list those that identified the reasons for the events as "reported-by",
and I apologise in advance if I leave anyone out: it was not done on purpose, I
made the mistake of not properly tagging all event report emails separately,
and might have missed some.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Markus Malkusch <markus@malkusch.de>
Reported-by: Peter Giles <g1l3sp@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
acer-wmi is indiscriminately using the device state from hotkey
events to update the various rfkill states. On the Aspire 1830 this
can result in a soft block on the wlan when the touchpad hotkey is
pressed, as it is reporting a non-zero device state that does not
reflect the wireless status. To fix this, only update rfkill states
when a wlan or bluetooth hotkey is pressed.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
acer-wmi: support integer return type from WMI methods
msi-laptop: fix section mismatch in reference from the function load_scm_model_init
acer-wmi: support to set communication device state by new wmid method
acer-wmi: allow 64-bits return buffer from WMI methods
acer-wmi: check the existence of internal 3G device when set capability
platform/x86:delete two unused variables
support wlan hotkey on Acer Travelmate 5735Z
platform-x86: intel_mid_thermal: Fix memory leak
platform/x86: Fix Makefile for intel_mid_powerbtn
platform/x86: Simplify intel_mid_powerbtn
acer-wmi: Delete out-of-date documentation
acerhdf: Clean up includes
acerhdf: Drop pointless dependency on THERMAL_HWMON
acer-wmi: Update MAINTAINERS
wmi: Orphan ACPI-WMI driver
tc1100-wmi: Orphan driver
acer-wmi: does not allow negative number set to initial device state
platform/oaktrail: ACPI EC Extra driver for Oaktrail
thinkpad_acpi: Convert printks to pr_<level>
thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
...
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI EC: remove redundant code
ACPI: Add D3 cold state
ACPI: processor: fix processor_physically_present in UP kernel
ACPI: Split out custom_method functionality into an own driver
ACPI: Cleanup custom_method debug stuff
ACPI EC: enable MSI workaround for Quanta laptops
ACPICA: Update to version 20110413
ACPICA: Execute an orphan _REG method under the EC device
ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place
ACPICA: Update internal address SpaceID for DataTable regions
ACPICA: Add more methods eligible for NULL package element removal
ACPICA: Split all internal Global Lock functions to new file - evglock
ACPI: EC: add another DMI check for ASUS hardware
ACPI EC: remove dead code
ACPICA: Fix code divergence of global lock handling
ACPICA: Use acpi_os_create_lock interface
ACPI: osl, add acpi_os_create_lock interface
ACPI:Fix goto flows in thermal-sys
There have section mismatch warning message shows up when building
the kernel with make CONFIG_DEBUG_SECTION_MISMATCH=y.
The problem is the load_scm_model_init() calls msi_laptop_input_setup()
which is an __init function, but load_scm_model_init() lacks a __init
annotation.
This patch add __init on load_scm_model_init() to avoid warning message.
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Have many Acer notebooks' BIOS already support new WMID_GUID3 method.
On those machines, that will be better set communication device by
evaluate WMID_GUID3 method.
Tested on Acer Travelmate 8572
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
variable handle is not used in these two functions,
just delete them.
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
On an Acer Travelmate 5735Z-452G32Mnss the WLAN-enable/disable key
doesn't send 0x1 as acpi event key code, but 0x3. This patch also
makes the module ignore hotkey acpi events for functions that are
already handled without. This avoids warning message "keyboard:
can't emulate rawmode for keycode 240".
Signed-off-by: Melchior FRANZ <mfranz@aon.at>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch:
1. Removes unnecessay #defines
2. Removes 'mfld_pb_priv' data structure which results in simpler error
handling and less memory allocations.
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
* The acerhdf driver isn't an ACPI driver, so it needs not include
<acpi/acpi_drivers.h>. All it uses is ec_read() and ec_write(), for
which <linux/acpi.h> is sufficient.
* I couldn't find any reason why <linux/fs.h> and <linux/sched.h> were
included.
This should avoid unneeded rebuilds of the acerhdf driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
