This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.
This patch also avoids registering the platform RTC driver on X86 if
we have a device tree blob. Otherwise we would setup the device based
on the hardcoded information in arch/x86 rather than the device tree
based one.
[ tglx: Changed "int of_have_populated_dt()" to bool as recommended by
Grant ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: rtc-linux@googlegroups.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
LKML-Reference: <1298405266-1624-12-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Support pm_ops in the AMBA bus, required to allow drivers to use runtime pm.
The implementation of AMBA bus pm ops is based on the platform bus
implementation.
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Now that the bus level code deals with a const id table, we can also
make the ID table in the amba_driver structure also const.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Make Primecell driver probe functions take a const pointer to their
ID tables. Drivers should never modify their ID tables in their
probe handler.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reason: Import mainline device tree changes on which further patches
depend on or conflict.
Trivial conflict in: drivers/spi/pxa2xx_spi_pci.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adds I2C bus driver for nVidia Tegra SoCs. Tegra includes 4 I2C
controllers, one of which is inside the Dynamic Voltage Controller
and has a slightly different register map.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The WM8958 has a different microphone bias architecture to WM8994 so needs
different configuration to WM8994. Support this in platform data.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Allow direct routing of the WM8958 microphone detection signal to a GPIO
to be used, saving the need to demux the interrupt.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Add proper RCU annotations/verbs to sk_wq and wq members
Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access)
Fix sunrpc sk_sleep() abuse too
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for the bq27000 battery to the bq27x00 driver.
The bq27000 is similar to the bq27200 except that it uses the HDQ bus
instead of I2C to communicate with the host system.
The driver is implemented as a platform driver. The driver expects to be
provided with a read callback function through its platform data. The read
function is assumed to do the lowlevel HDQ handling and read out the value
of a certain register.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
We force particular alignment when we generate attribute structures
when generation MODULE_VERSION() data and we need to make sure that
this alignment is followed when we iterate over these structures,
otherwise we may crash on platforms whose natural alignment is not
sizeof(void *), such as m68k.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
[ There are more issues here, but the fixes are incredibly ugly - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As nothing should be writing to the clocksource name string, make the
clocksource name pointer const. Build-tested on ARM Versatile Express.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
CLOCK_MONOTONIC stops while the system is in suspend. This is because
to applications system suspend is invisible. However, there is a
growing set of applications that are wanting to be suspend-aware,
but do not want to deal with the complications of CLOCK_REALTIME
(which might jump around if settimeofday is called).
For these applications, I propose a new clockid: CLOCK_BOOTTIME.
CLOCK_BOOTTIME is idential to CLOCK_MONOTONIC, except it also
includes any time spent in suspend.
This patch add hrtimer base for CLOCK_BOOTTIME, using
get_monotonic_boottime/ktime_get_boottime, to allow
in kernel users to set timers against.
CC: Jamie Lokier <jamie@shareable.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alexander Shishkin <virtuoso@slind.org>
CC: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The hrtimer code is written mainly with CLOCK_REALTIME and CLOCK_MONOTONIC
in mind. These are clockids 0 and 1 resepctively. However, if we are
to introduce any new hrtimer bases, using new clockids, we have to skip
the cputimers (clockids 2,3) as well as other clockids that may not impelement
timers.
This patch adds a little bit of indirection between the clockid and
the base, so that we can extend the base by one when we add
a new clockid at number 7 or so.
CC: Jamie Lokier <jamie@shareable.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alexander Shishkin <virtuoso@slind.org>
CC: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
wq:fixes-2.6.38 does s/WQ_FREEZEABLE/WQ_FREEZABLE and wq:for-2.6.39
adds new usage of the flag. The combination of the two creates a
build failure after merge. Fix it by renaming all freezeables to
freezables.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Different board have different requirements/setups so let's be more
flexible.
Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
As there is no common configuration settings that would work in every
situation, remove the fixed config data from driver code and add
config data to platform data.
Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Change prefixes from qt602240 to mxt to reflect that the driver supports
whole line of mXT touchscreens.
Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Since the driver will be supporting whole range of Atmels mXT touchscreen
controllers we better rename it to atmel_mxt_ts.
Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The dcb_app protocol field is a __u32 however the 802.1Qaz
specification defines it as a 16 bit field. This patch brings
the structure inline with the spec making it a __u16.
CC: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to lookup the irq descriptor when calling from a chip callback
function which has irq_data already handy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some chips want irq_eoi() only called when an interrupt is actually
handled. So they have checks for INPROGRESS and DISABLED in their
irq_eoi callbacks. Add a chip flag, which allows to handle that in the
generic code. No impact on the fastpath.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
sparc64 needs to call a preflow handler on certain interrupts befor
calling the action chain. Integrate it into handle_fasteoi_irq. Must
be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S. Miller <davem@davemloft.net>
If everything uses the right accessors, then enabling
GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you.
Don't be lazy and use the trick which I use in the core code!
git grep status_use_accessors
will unearth it in a split second. Offenders are tracked down and not
slapped with stinking trouts. This time we use frozen shark for a
better educational value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some irq_chips need to know the state of wakeup mode for
setting the trigger type etc. Reflect it in irq_data state.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
irq_chips, which require to mask the chip before changing the trigger
type should set this flag. So the core takes care of it and the
requirement for looking into desc->status in the chip goes away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Looking through irq_chip implementations I noticed that some of them
have special requirements, like setting the type masked and therefor
fiddle in irq_desc->status. Add a flag field, so the core code can
handle it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
That's the data structure chip functions get provided. Also allow them
to signal the core code that they updated the flags in irq_data.state
by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged.
The type bits should be accessed via:
val = irqd_get_trigger_type(irqdata);
and
irqd_set_trigger_type(irqdata, val);
Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
That's the right data structure to look at for arch code.
Accessor functions are provided.
irqd_is_per_cpu(irqdata);
irqd_can_balance(irqdata);
Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Its' too ugly and needs to go. The only users are core code and
parisc. Core code does not need it and parisc gets a new check once
IRQ_PER_CPU is reflected in irq_data.state.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The saving of this switch is minimal versus the ifdef mess it
creates. Simple enable PER_CPU unconditionally and remove the config
switch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
chip implementations need to know about it. Keep status in sync until
all users are fixed.
Accessor function: irqd_is_setaffinity_pending(irqdata)
Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some chip implementations need to access certain status flags. With
sparse irqs that requires a lookup of the irq descriptor. Add a state
field which contains such flags.
Name it in a way which will make coders happy to access it with the
proper accessor functions. And it's easy to grep for.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
