Add new ioctls for per context timestamps.
Timestamp functions (read/write/wait) will now be context
specific rather than only using the global timestamp.
Per context timestamps is a requirement for priority
based queueing.
Change-Id: I5fdfb816480241b9552ecf90ed1bb22db3a652b5
Signed-off-by: Carter Cooper <ccooper@codeaurora.org>
External Power Monitor(EPM) uses the external ADS1158 ADC
to measure voltage and current. Each ADS1158 ADC supports
measuring 16 Analog input channels.
APQ8064 has support for 2ADS ADC and can measure upto 32
analog input channels. The power to the EPM uses a
SX1509 I2C expander to enable the ADS ADC. Depending on
the input channel the appropriate chip select is de-asserted
to select the ADS ADC to measure the input signal. The
ADS1158 chip is configured through the SPI interface.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Change-Id: Ib9f36606b6b183f75754b7763dbe45455c779327
MDM9615 has identical configuration for the number
of sensors and slope with MSM8960. Add support to
enable the TSENS for calibrated parts.
Change-Id: Ieb1f118ce916ab5a4f079b18b11541d86c3a5560
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Use the maximum number of channels added in the
ADC entry list in the board to check for channel
validity. This patch also adds additional checks
in the driver to validate the requested channel.
CRs-Fixed: 339631
Change-Id: I347f0d39a00b6ee12976ec2c24843626b54617d4
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
* changes:
mmc: core: Remove BROKEN_CLK_GATING quirk for WCN1314 cards
mmc: msm_sdcc: fixup for enabling MMC_CLKGATE feature for SDIO cards
mmc: core: Export mmc_set_ios so that host drivers can use it
If HPHL and HPHR have relatively high impedance, internal MBHC HPHL
trigger cannot trigger so results in headphone/headset detection
failure.
Utilize MIC trigger as well as HPHL trigger in order to detect headphone
and headset which have high impedance on headphone line.
CRs-fixed: 339390, 337590, 336847, 334339
Change-Id: Ibfd4ba254197233f2b5e253f5d1fa2a98c848c97
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
The SMB349 charger chip allows charge batteries
with a higher current. Add this driver to be able to
control charging from kernel space and deliver charging
information to userspace.
Also add debugfs entries to show current register
settings of SMB349 charger.
Change-Id: Ic88b539304539a49ebe69517d13045cbb18091bf
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Function driver can register for card removal notifications.
Before removing the card, let function driver notify the same
and allow it to cleanup.
Change-Id: I5d423807277bdd7476a6ea7d6a7c9ef71c0725f5
Signed-off-by: Pavan kumar <pavan@codeaurora.org>
In the current implementation, turning off SDCC clocks when
SDIO card is inserted, is controlled by the SDCC driver in
suspend/resume callbacks. This makes the dynamic clock gating
(MMC_CLKGATE) feature, when enabled, to be broken for SDIO cards,
as configuring of sdio wakeup interrupt is entirely handled
in system suspend/resume callbacks. Handle this by moving all
of the wakeup handling code to generic set_ios function which can be
called either from core layer or driver layer.
Since the SDCC controller supports asynchronous notification of
SDIO card activity when the clocks are off use this for enabling
MMC_CLKGATE feature which helps in TCX0 during idle state.
Also, handle the case where the SDIO function driver is not interested
in waking up the system during suspend but the SDCC driver still
configures DAT1 line as wakeup interrupt.
Change-Id: I260ae2161cfe9160f93e6af4f9b6c34db96397c0
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
mmc_set_ios() is used by host drivers during suspend/resume
routines in indirect way i.e., by calling host->ops->set_ios().
But now with MMC_CLKGATE enabled, mmc_set_ios() also updates
host->clk_gated flag. So export this API so that host controller
drivers can use it.
Change-Id: Ib0c177635bb8d87ba68c98e08b8d940c73f2b80c
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
* changes:
of/irq: Add interrupts-names property to name an irq resource
of/address: Add reg-names property to name an iomem resource
of: Add helpers to get one string in multiple strings property
Register a PMIC pm8xxx thermal alarm device in the pm8018-core
driver. This device will allow userspace to monitor the
temperature of the PMIC die.
Change-Id: I888c0737dd991da9eaec039b20b381a2bfd7923c
Signed-off-by: David Collins <collinsd@codeaurora.org>
Add of_property_read_string_index and of_property_count_strings
to retrieve one string inside a property that will contains
severals strings.
Change-Id: I15d374d13ee7711548e3626e49875b6ee8be0e1f
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kevin Hilman <khilman@ti.com>
[mbohan@codeaurora.org: resolve conflict in include/linux/of.h]
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
The code for IOCTL_KGSL_DEVICE_REGREAD was removed long ago
but the header was never cleaned up.
Change-Id: Id3eaf0486fae133dfd72a56ea915f63fcb3f6bb1
Signed-off-by: Harsh Vardhan Dwivedi <hdwivedi@codeaurora.org>
DIAG maintains mask info in a buffer. This buffer is parsed
using a structure. Recently this structure was modified to add
another member. Now, the parsing code has to change to account
for this new member, otherwise, the parsing is incorrect and
misses certain log codes.
Also updated log codes with the latest on modem.
Change-Id: Iaaf86e4f3342fd73898eb11124b4893ec79aa564
Signed-off-by: Shalabh Jain <shalabhj@codeaurora.org>
V4L clients should be able to specify the video header to be present
in all I-frame (as it is common in many broadcasting scenarios). By
specifying this mode, V4L clients will receive sps/pps information
prepended to all I-frames.
Change-Id: Ia93b1d0a59b8d1abf13d1bdb8de494f13ebe1c95
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Add a gpio_chip driver to support the Qualcomm SPMI PMIC
architecture called QPNP. The driver supports Device Tree
and allows a device_node to be registered as a gpio-controller.
The driver also specifies APIs to allow a non-Device Tree user
the ability to configure the PMIC GPIOs.
This driver does not handle interrupts for GPIOs directly.
Instead, that work is handled by the existing qpnp-int driver.
This is feasible since the interrupt register map for all
QPNP peripherals is the same.
Change-Id: I04eb39d9855b0957f0647010fcb203ec2fc83c7c
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
The spmi-dev-container binding is intended for SPMI
configurations that have multiple device nodes associated with
only one spmi_device. By default, if this flag is not specified,
each device node will create a new spmi_device.
Sometimes having multiple spmi_devices for SPMI device nodes is
superfluous. One example of this is gpios. In some architectures,
a single gpio is treated as a unique device. But from a gpio_chip
perspective, the chip is comprised of many gpios. Beyond wasting
memory allocating a unique spmi_device per gpio, the implication
of not coalescing spmi_devices is that the clients probe() routine
would be called N number of times. But this sort of behavior makes
it difficult to realize when a gpio_chip starts and stops. If we
assume that one gpio_chip represents one call to probe(), then
this problem is solved, since all gpios in that chip will be
passed as resources.
In order to support multiple device nodes per spmi_device, we
also need to extend the data structures for spmi_resources.
This change also makes an effort to cleanup some of the error
handling for illegal combinations of device bindings, as well as
adding some additional documentation.
Change-Id: If3ce2aaaa07bdf79e0d9fdedf16419e74a00fbec
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Add support for a dummy driver that has an implementation
connected to no real hardware devices. Its purpose is to aid
bringup scenarios by providing clients a regulator interface
that they expect. This driver shouldn't be enabled if a real
device implementation for a particular platform already exists.
Change-Id: Ib83027b4e599ebbc3cb153b2f346bb03495bb746
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
The charger hardware has a +/-30mv error for vdd_max settings. This
means that when vdd_max is set to 4200mV the actual voltage on vph_pwr
line could range from 4170mV to 4230mV. This further means that when
constant current to constant voltage transition happens, the battery
may not be charged up to 4200mV - leading to an premature end of charge.
Fix this by implementing periodic IR compensation. On a device measure the
resistance from the vbat terminal to the ground by shorting the +ve and
-ve of the battery terminals (without a battery), this will be referred to
as rconn in the description. In the code it is rconn_mohm to reflect the
units.
The voltage at battery terminal will be
Vbat(terminal) = Vbat(xoadc) + Ibat * rconn
where Ibat is the current flowing out of (or into if -ve) of the battery.
Vbat(xoadc) and Ibat can be obtained by using the override mode of the
bms. So Vbat(terminal) can be deduced and compensated by increasing
vdd_max. This also helps in increasing constant current mode thereby
decreasing constant voltage mode and decreasing the overall charging time.
The value of rconn will be specific to a PCB layout, it is
passed in from platform_data.
Change-Id: If8df93333ca6b0bad35505895a4fc5577562fadd
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Provision to distinguish the P2P scan and the normal scan
with no_cck flag and thus disable the 11b rates for
p2p scan.
Change-Id: Ia4073a5f926c6ac97dffdee99f54ba53535fea85
Signed-off-by: Sunil Dutt Undekari<duttus@codeaurora.org>
This patch changes OTG driver to support different
OTG statemachine states for OTG2.0 complaince. It will
also enable to swap Host role between two OTG devices
via HNP and enable B device to request A device to start
VBUS session via SRP.
Change-Id: Ibe2519ff1570768f51e879af483a6f5c23b38d8f
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Due to limitations in the multimedia architecure
clients might not know when a buffer can be unmapped
from the IOMMU. In addition, the multimedia architecture
causes unnecessary mappings/unmappings for the same buffers
which reduces framerates.
Add logic to delay unmapping from the IOMMU
until buffer memory is freed and unmap any outstanding
mappings to avoid virtual memory address space leak.
Change-Id: Idaeae269d9ba623e25a0cb087a89b4cbb63915af
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Merge a backport of the following 82 commits from the 3.2 kernel.
commit 10f1551c50
Author: Yu Xu <yuxu@marvell.com>
Date: Sat Dec 10 00:03:33 2011 +0800
usb: gadget: storage: release superspeed descriptors.
Release superspeed mass storage descriptors memory
when the function is unbind.
Signed-off-by: Yu Xu <yuxu@marvell.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit 1d6d304680
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Oct 3 16:39:30 2011 +0300
usb: gadget: core: fix bug when removing gadget drivers
usb_gadget_disconnect() is responsible of removing
data pullups. Before doing that we must, first, tell
gadget driver we're disconnecting (by calling disconnect
method on gadget driver structure), unbind the gadget
driver and stop the controller.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/udc-core.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 145cbade27
Author: Felipe Balbi <balbi@ti.com>
Date: Wed Aug 3 13:33:27 2011 +0200
usb: gadget: storage: add superspeed support
this patch adds superspeed descriptors for the
storage gadgets.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[idos@codeaurora.org: Conflicts: drivers/usb/gadget/storage_common.c]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 22 ++++++
drivers/usb/gadget/file_storage.c | 59 +++++++++++++---
drivers/usb/gadget/mass_storage.c | 2 +-
drivers/usb/gadget/storage_common.c | 127 +++++++++++++++++++++++++++++++++++
4 files changed, 199 insertions(+), 11 deletions(-)
commit b0c3e7fb4d
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Oct 10 09:43:44 2011 +0300
usb: gadget: fix typo for default U1/U2 exit latencies
s/DEFULT/DEFAULT/, no functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 4 ++--
include/linux/usb/gadget.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
commit 834e066cff
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 15:26:06 2011 -0700
usb: gadget: storage: fix mass storage gadgets to work with Synopsys UDC
The Synopsys USB device controller requires all OUT transfer request
lengths to be aligned to max packet size. The mass storage gadgets do
not meet this requirement for Super Speed. The gadgets already have a
function which performs this alignment for CBW packets, so use it for
data packets too.
The alternative would be to implement bounce buffers in the DWC3
driver, but that could have a significant impact on performance.
This version is based upon a more-correct patch written by Alan
Stern.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 18 +++++++++---------
drivers/usb/gadget/file_storage.c | 18 +++++++++---------
2 files changed, 18 insertions(+), 18 deletions(-)
commit 7295baf179
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Aug 18 20:29:00 2011 +0200
USB: gadget: storage: remove alignment assumption
This patch (as1481) fixes a problem affecting g_file_storage and
g_mass_storage when running at SuperSpeed. The two drivers currently
assume that the bulk-out maxpacket size can evenly divide the SCSI
block size, which is 512 bytes. But SuperSpeed bulk endpoints have a
maxpacket size of 1024, so the assumption is no longer true.
This patch removes that assumption from the drivers, by getting rid of
a small optimization (they try to align VFS reads and writes on page
cache boundaries). If a command's starting logical block address is
512 bytes below the end of a page, it's not okay to issue a USB
command for just those 512 bytes when the maxpacket size is 1024 -- it
would result in either babble (for an OUT transfer) or a short packet
(for an IN transfer).
Also, for backward compatibility, the test for writes extending beyond
the end of the backing storage has to be changed. If the host tries
to do this, we should accept the data that fits in the backing storage
and ignore the rest. Because the storage's end may not align with a
USB packet boundary, this means we may have to accept a USB OUT
transfer that extends beyond the end of the storage and then write out
only the part of the data that fits.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[idos@codeaurora.org: Conflicts: drivers/usb/gadget/f_mass_storage.c
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 64 ++++++++++++---------------------
drivers/usb/gadget/file_storage.c | 67 ++++++++++++++---------------------
2 files changed, 50 insertions(+), 81 deletions(-)
commit 9e5eb17594
Author: Peiyu Li <peiyu.li@csr.com>
Date: Wed Aug 17 22:52:59 2011 -0700
usb: gadget: storage: adapt logic block size to bound block devices
Now the mass storage driver has fixed logic block size of 512 bytes.
The mass storage gadget read/write bound devices only through VFS, so the
bottom level devices actually are just RAW devices to the driver and connected
PC. As a RAW, hosts can always format, read and write it right in 512 bytes
logic block and don't care about the actual logic block size of devices bound
to the gadget.
But if we want to share the bound block device partition between target board
and PC, in case the logic block size of the bound block device is 4KB, we
execute the following steps:
1. connect a board with mass storage gadget to PC(the board has set one
partition of on-board block device as file name of the mass storage)
2. PC format the mass storage to VFAT by default logic block size and
read/write it
3. disconnect boards from PC
4. target board mount the partition as VFAT
Step 4 will fail since kernel on target thinks the logic block size of the
bound partition as 4KB.
A typical error is "FAT: logical sector size too small for device (logical
sector size = 512)"
If we execute opposite steps:
1. format the partition to VFAT on target board and read/write this partition
2. connect the board to Windows PC as usb mass storage gadget, windows will
think the disk is not formatted
So the conclusion is that only as a gadget, the mass storage driver has no any
problem. But being shared VFAT or other filesystem on PC and target board, it
will fail.
This patch adapts logic block size to bound block devices and fix the issue.
Cc: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peiyu Li <peiyu.li@csr.com>
Signed-off-by: Xianglong Du <xianglong.du@csr.com>
Signed-off-by: Huayi Li <huayi.li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 63 ++++++++++++++++++++--------------
drivers/usb/gadget/file_storage.c | 50 +++++++++++++--------------
drivers/usb/gadget/storage_common.c | 23 ++++++++++---
3 files changed, 79 insertions(+), 57 deletions(-)
commit 26bba694a4
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Dec 19 13:45:01 2011 +0200
usb: gadget: epautoconf: do not change number of streams
We should not change gadget driver's descriptors just
because we think it's right to do so.
There are several of reasons which would support this
statement but it suffices to say that this was probably
never tested because it updates bmAttributes without
asking the driver if it's ok to do so.
This means that e.g. on UASP gadget it would enable
stream support even for the command endpoint which must
not have stream support enabled.
In fact, this change is fixing the bug introduced by
commit a59d6b9 (usb: gadget: add streams support to
the gadget framework) which was caught when testing
UASP gadget with dwc3 driver.
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/epautoconf.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
commit fb5591ebf5
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Thu Jun 23 14:26:15 2011 +0200
usb: gadget: udc-core: add "new-style" registration interface
udc_start() should only trigger the internal state machine and make
minimal house keeping. Before that call udc-core calls the bind()
callback and after the callback the pullup().
udc_stop() is simillar, udc-core calls pullup(), unbind() and finally
udc_stop().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/udc-core.c | 75 ++++++++++++++++++++++++++++++++++++++--
include/linux/usb/gadget.h | 6 +++
2 files changed, 77 insertions(+), 4 deletions(-)
commit 0d0c240fac
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Thu Jun 23 14:26:11 2011 +0200
usb: gadget: defer setting maxpacket till ->setup()
maxpacket is set by the udc driver for ep0 very early. This value is
copied by the function gadget used later for the USB_DT_DEVICE and
USB_DT_DEVICE_QUALIFIER query. This seems to work fine so far. For USB3
we need set a different value here. In SS speed it is 2^x with x=9 and
in HS we set something <= 64. If the UDC starts in SS and continues in
HS after the cable has been plugged it will report a too small value.
There setting of this value is defered and taken automaticly from the
ep0 pointer where the UDC driver can update it according to the speed it
detected _after_ a cable has been plugged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 3 +--
drivers/usb/gadget/dbgp.c | 2 +-
drivers/usb/gadget/file_storage.c | 10 ++++++----
drivers/usb/gadget/gmidi.c | 3 +--
drivers/usb/gadget/inode.c | 5 ++---
drivers/usb/gadget/printer.c | 14 +++++++++-----
6 files changed, 20 insertions(+), 17 deletions(-)
commit bc2aa11468
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Wed Jun 29 16:41:50 2011 +0300
usb: gadget: add SuperSpeed support to the Gadget Framework
SuperSpeed USB has defined a new descriptor, called
the Binary Device Object Store (BOS) Descriptor. It
has also changed a bit the definition of SET_FEATURE
and GET_STATUS requests to add USB3-specific details.
This patch implements both changes to the Composite
Gadget Framework.
[ balbi@ti.com : slight changes to commit log
fixed a compile error on ARM ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/Kconfig | 6 +
drivers/usb/gadget/composite.c | 257 ++++++++++++++++++++++++++++++++++++---
drivers/usb/gadget/epautoconf.c | 6 +-
include/linux/usb/composite.h | 14 ++
include/linux/usb/gadget.h | 31 +++++
5 files changed, 293 insertions(+), 21 deletions(-)
commit 3ba28906ae
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Wed Jun 29 16:41:49 2011 +0300
usb: gadget: add max_speed to usb_composite_driver
This field is used by the Gadget drivers to specify
the maximum speed they support, meaning: the maximum
speed they can provide descriptors for.
The driver speed will be set in consideration of this
value.
[ balbi@ti.com : dropped the ifdeffery ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: added max_speed also to android.c]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/android.c | 1 +
drivers/usb/gadget/audio.c | 1 +
drivers/usb/gadget/cdc2.c | 1 +
drivers/usb/gadget/composite.c | 2 ++
drivers/usb/gadget/ether.c | 1 +
drivers/usb/gadget/g_ffs.c | 1 +
drivers/usb/gadget/hid.c | 1 +
drivers/usb/gadget/mass_storage.c | 1 +
drivers/usb/gadget/multi.c | 1 +
drivers/usb/gadget/ncm.c | 1 +
drivers/usb/gadget/nokia.c | 1 +
drivers/usb/gadget/serial.c | 1 +
drivers/usb/gadget/webcam.c | 1 +
drivers/usb/gadget/zero.c | 1 +
include/linux/usb/composite.h | 2 ++
15 files changed, 17 insertions(+), 0 deletions(-)
commit 081412dc44
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:53 2011 +0300
usb: gadget: add streams support to the gadget framework
This patch defines necessary fields to support
streaming for USB3.0.
It implements a new function, called
usb_ep_autoconfig_ss(), to be used instead of the
existing usb_ep_autoconfig() when working in
SuperSpeed mode and there is a need to search for
an endpoint according to the number of required
streams.
[ balbi@ti.com : slight changes to commit log ]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/epautoconf.c | 125 +++++++++++++++++++++++++++++++--------
include/linux/usb/gadget.h | 13 ++++
2 files changed, 113 insertions(+), 25 deletions(-)
commit 5ef53d97a1
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:52 2011 +0300
usb: gadget: coding style fix
fix the coding style of a few switches on the
gadget framework.
[ balbi@ti.com : add a commit log ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 16 ++++++++++---
drivers/usb/gadget/dummy_hcd.c | 48 ++++++++++++++++++++++++++++++----------
2 files changed, 48 insertions(+), 16 deletions(-)
commit 31ac352192
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 15:33:50 2011 +0200
usb: gadget: use config_ep_by_speed() instead of ep_choose()
Remove obsolete functions:
1. ep_choose()
2. usb_find_endpoint()
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Changed also the following files to
comply with this commit: f_accessory.c,f_adb.c,f_diag.c,f_mtp.c,
f_rmnet.c,f_rmnet_sdio,f_rmnet_smd,f_rmnet_smd_sdio,f_serial.f_ccid.c.
Also merged a patch in f_serial.c for checking return value of
config_ep_by_speed, see "usb: gadget: fix g_serial regression".
Also fix a bug in ci13xxx_udc. Since f_serial is now checking if the endpoint
descriptors are null in the set_alt function, need to set them to null on
ep_disable in case of cable disconnect. Since the ep descriptor was inserted to
struct usb_ep in "usb: gadget: add usb_endpoint_descriptor to struct usb_ep",
also set mEp->ep.desc to NULL. I have upstream this to the community, please
see "usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep" in
the latest linux kernel.]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/ci13xxx_udc.c | 1 +
drivers/usb/gadget/config.c | 26 -------------
drivers/usb/gadget/f_accessory.c | 30 +++++++++++-----
drivers/usb/gadget/f_acm.c | 46 +++++++-----------------
drivers/usb/gadget/f_adb.c | 30 +++++++++++----
drivers/usb/gadget/f_ccid.c | 54 +++++++++++-----------------
drivers/usb/gadget/f_diag.c | 13 ++++---
drivers/usb/gadget/f_ecm.c | 45 +++++++----------------
drivers/usb/gadget/f_eem.c | 32 +++++------------
drivers/usb/gadget/f_hid.c | 19 +++-------
drivers/usb/gadget/f_loopback.c | 11 ++++--
drivers/usb/gadget/f_mass_storage.c | 46 ++++++++++--------------
drivers/usb/gadget/f_mtp.c | 30 +++++++++++----
drivers/usb/gadget/f_ncm.c | 49 ++++++++------------------
drivers/usb/gadget/f_obex.c | 32 +++++------------
drivers/usb/gadget/f_phonet.c | 12 +++---
drivers/usb/gadget/f_rmnet.c | 48 ++++++++-----------------
drivers/usb/gadget/f_rmnet_sdio.c | 62 ++++++++++++++++++++++++++------
drivers/usb/gadget/f_rmnet_smd.c | 38 +++++++++++++++-----
drivers/usb/gadget/f_rmnet_smd_sdio.c | 63 ++++++++++++++++++++++++++------
drivers/usb/gadget/f_rndis.c | 46 +++++++-----------------
drivers/usb/gadget/f_serial.c | 53 +++++++++-------------------
drivers/usb/gadget/f_sourcesink.c | 8 +++-
drivers/usb/gadget/f_subset.c | 29 +++------------
drivers/usb/gadget/file_storage.c | 12 ++++++
drivers/usb/gadget/storage_common.c | 11 ------
include/linux/usb/composite.h | 15 --------
include/linux/usb/gadget.h | 6 ---
28 files changed, 392 insertions(+), 475 deletions(-)
commit cf64ce4954
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:49 2011 +0300
usb: gadget: configure endpoint according to gadget speed
Add config_ep_by_speed() to configure the endpoint
according to the gadget speed.
Using this function will spare the FDs from handling
the endpoint chosen descriptor.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 85 +++++++++++++++++++++++++++++++++++++++
drivers/usb/gadget/epautoconf.c | 1 +
include/linux/usb/composite.h | 3 +
include/linux/usb/gadget.h | 3 +
4 files changed, 92 insertions(+), 0 deletions(-)
commit cf709c115c
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:48 2011 +0300
usb: gadget: add usb_endpoint_descriptor to struct usb_ep
Change usb_ep_enable() prototype to use endpoint
descriptor from usb_ep.
This optimization spares the FDs from saving the
endpoint chosen descriptor. This optimization is
not full though. To fully exploit this change, one
needs to update all the UDCs as well since in the
current implementation each of them saves the
endpoint descriptor in it's internal (and extended)
endpoint structure.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Added more changes for the following files
since API break with msm code tree: ci13xxx_udc.c,f_accessory,f_adb,
f_diag,f_mtp,f_rmnet,f_rmnet_sdio,f_rmnet_smd, f_rmnet_smd_sdio,u_bam.c,
u_sdio.c,u_rmnet.h,u_sdio.c,u_smd.c,f_ccid.c,u_data_hsic.c]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/ci13xxx_udc.c | 6 ++++--
drivers/usb/gadget/dbgp.c | 8 +++++---
drivers/usb/gadget/f_accessory.c | 16 ++++++++++------
drivers/usb/gadget/f_acm.c | 9 ++++-----
drivers/usb/gadget/f_adb.c | 14 ++++++++------
drivers/usb/gadget/f_audio.c | 5 ++---
drivers/usb/gadget/f_ccid.c | 15 ++++++---------
drivers/usb/gadget/f_diag.c | 12 +++++-------
drivers/usb/gadget/f_ecm.c | 17 ++++++++---------
drivers/usb/gadget/f_eem.c | 10 +++++-----
drivers/usb/gadget/f_fs.c | 3 ++-
drivers/usb/gadget/f_hid.c | 5 ++---
drivers/usb/gadget/f_loopback.c | 14 ++++++--------
drivers/usb/gadget/f_mass_storage.c | 3 ++-
drivers/usb/gadget/f_mtp.c | 17 ++++++++++-------
drivers/usb/gadget/f_ncm.c | 17 ++++++++---------
drivers/usb/gadget/f_obex.c | 6 +++---
drivers/usb/gadget/f_phonet.c | 9 ++++-----
drivers/usb/gadget/f_rmnet.c | 9 ++++-----
drivers/usb/gadget/f_rmnet_sdio.c | 15 +++++++++------
drivers/usb/gadget/f_rmnet_smd.c | 15 +++++++++------
drivers/usb/gadget/f_rmnet_smd_sdio.c | 15 +++++++++------
drivers/usb/gadget/f_rndis.c | 15 +++++++--------
drivers/usb/gadget/f_serial.c | 9 ++++-----
drivers/usb/gadget/f_sourcesink.c | 10 ++++------
drivers/usb/gadget/f_subset.c | 8 ++++----
drivers/usb/gadget/f_uvc.c | 6 ++++--
drivers/usb/gadget/file_storage.c | 3 ++-
drivers/usb/gadget/gmidi.c | 6 ++++--
drivers/usb/gadget/inode.c | 6 ++++--
drivers/usb/gadget/printer.c | 26 ++++++++++++++------------
drivers/usb/gadget/u_bam.c | 8 ++++----
drivers/usb/gadget/u_data_hsic.c | 10 ++--------
drivers/usb/gadget/u_ether.c | 12 ++++++------
drivers/usb/gadget/u_ether.h | 4 ----
drivers/usb/gadget/u_rmnet.h | 2 --
drivers/usb/gadget/u_sdio.c | 4 ++--
drivers/usb/gadget/u_serial.c | 4 ++--
drivers/usb/gadget/u_serial.h | 2 --
drivers/usb/gadget/u_smd.c | 4 ++--
include/linux/usb/gadget.h | 16 +++++++---------
41 files changed, 197 insertions(+), 198 deletions(-)
commit d23607a2eb
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Tue Jun 28 16:33:47 2011 +0300
usb: gadget: convert all users to the new udc infrastructure
peripheral drivers are using usb_add_gadget()/usb_del_gadget() to
register/unregister to the udc-core.
The udc-core will take the first available gadget driver and attach
function driver which is calling usb_gadget_register_driver(). This is
the same behaviour we have right now.
Only dummy_hcd was tested, the others were compiled tested.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Roy Huang <roy.huang@analog.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: cxie4 <cxie4@marvell.com>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org:
Conflicts: drivers/usb/gadget/ci13xxx_udc.c
msm72k_udc.c: This driver is not exists in Linux community,so fix this one too.
cyasgadget.c: combine other patch from the community ("convert cyasgadget to new udc core")
into this commit. Removed the #if 0 block that was in the community version and fix
the cause problem, because of which it was under #if 0 block]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
.../staging/westbridge/astoria/gadget/cyasgadget.c | 26 ++++++++++++++--
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/amd5536udc.c | 18 ++++++++---
drivers/usb/gadget/at91_udc.c | 20 +++++++++---
drivers/usb/gadget/atmel_usba_udc.c | 26 ++++++++++++++--
drivers/usb/gadget/ci13xxx_udc.c | 30 ++++++++++++++-----
drivers/usb/gadget/dummy_hcd.c | 31 +++++++++++++------
drivers/usb/gadget/fsl_qe_udc.c | 20 ++++++++++--
drivers/usb/gadget/fsl_udc_core.c | 20 ++++++++++--
drivers/usb/gadget/fusb300_udc.c | 15 +++++++--
drivers/usb/gadget/goku_udc.c | 19 +++++++++---
drivers/usb/gadget/imx_udc.c | 20 +++++++++---
drivers/usb/gadget/langwell_udc.c | 20 ++++++++----
drivers/usb/gadget/m66592-udc.c | 17 ++++++++--
drivers/usb/gadget/msm72k_udc.c | 30 ++++++++++++++++---
drivers/usb/gadget/mv_udc_core.c | 19 +++++++----
drivers/usb/gadget/net2280.c | 18 ++++++++---
drivers/usb/gadget/omap_udc.c | 22 +++++++++++---
drivers/usb/gadget/pch_udc.c | 16 +++++++--
drivers/usb/gadget/pxa25x_udc.c | 19 ++++++++----
drivers/usb/gadget/pxa27x_udc.c | 23 ++++++++++----
drivers/usb/gadget/r8a66597-udc.c | 15 +++++++--
drivers/usb/gadget/s3c-hsotg.c | 19 +++++++++--
drivers/usb/gadget/s3c-hsudc.c | 16 +++++++--
drivers/usb/gadget/s3c2410_udc.c | 29 +++++++++++-------
drivers/usb/musb/musb_gadget.c | 23 +++++++++++---
drivers/usb/renesas_usbhs/mod_gadget.c | 20 +++++++++---
27 files changed, 411 insertions(+), 141 deletions(-)
commit 5177504241
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Jun 28 16:33:46 2011 +0300
usb: gadget: introduce UDC Class
this class will be used to abstract away several of the duplicated
operations scattered among the USB gadget controller drivers.
Later, we can add an atomic notifier to tell interested drivers about
what's happening with the controller. Notifications such as suspend,
resume, enumerated, etc. will be useful, at a minimum, for implementing
usb charger detection.
As part of the converting process usb_gadget_probe_driver() is no longer
part of each udc but pushed into the ->stap() callback. The same for his
couterpart.
The core is currently set explicit to 'n'. It will be changed to 'y' once
all users are converted since it provides functions which clash with
other drivers.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/udc-core.c | 418 +++++++++++++++++++++++++++++++++++++++++
include/linux/usb/gadget.h | 7 +
2 files changed, 425 insertions(+), 0 deletions(-)
commit 9bcc83f456
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Aug 19 18:10:56 2011 +0300
usb: ch9: add function defines from ch9, USB 3.0 spec
not to confuse with Table 9-7 in USB 2.0 spec
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
include/linux/usb/ch9.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
commit 0be99a24db
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Sep 30 18:08:59 2011 -0400
usb: Add module.h to various dwc3 drivers
These files uses the full set of MODULE_ macros and so need to
include module.h directly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 1 +
drivers/usb/dwc3/dwc3-omap.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
commit f208a8f461
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:51 2011 +0300
usb: dwc3: convert structures into bitshifts
our parameter structures need to be written to
HW, so instead of assuming little endian, we
convert those into bit shifts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 6 +-
drivers/usb/dwc3/gadget.c | 40 ++++++-------
drivers/usb/dwc3/gadget.h | 139 +++++++++------------------------------------
3 files changed, 48 insertions(+), 137 deletions(-)
commit b141b8cd02
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:50 2011 +0300
usb: dwc3: gadget: allow clock gating to work
The dwc3 core has internal clock gating support.
Let's allow that to happen by clearing the disable
bit in GCTL register.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 8 ++++++++
2 files changed, 14 insertions(+), 0 deletions(-)
commit b333f87fcc
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:49 2011 +0300
usb: dwc3: core: cache GHWPARAMS* registers
cache the contents of GHWPARAMS* registers in
our device structure for easy access.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
commit d8e9f2a2f0
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:48 2011 +0300
usb: dwc3: add struct dwc3_hwparams
That structure will hold a copy of readonly
GHWPARAMS* registers for ease accessing by
the driver.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
commit 2aadc55ef7
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:47 2011 +0300
usb: dwc3: gadget: implement streams support
The following patch adds support for streams
to dwc3 driver.
While at that, also fix one small issue on
endpoint disable where we should clear all
flags not only ENABLED.
Reviewied-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Documentation/usb/dwc3.txt | 8 --------
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 34 ++++++++++++++++++++++++++++++----
3 files changed, 36 insertions(+), 12 deletions(-)
commit 92366a9b25
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:46 2011 +0300
usb: dwc3: gadget: add support for Bursts
We already have the value from gadget drivers,
just need to pass it to our controller.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Integrate in this commit also the change
"USB: use usb_endpoint_maxp() instead of le16_to_cpu()" 29cc88979a8818cd8c5019426e945aed118b400e
from Linux kernel 3.1. The reason why this change was not
cherry-picked separately is because I wanted to reduce impact
on msm code tree, and only change dwc3 driver.]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 4f5db5cf5b
Author: kuninori.morimoto.gx@renesas.com <kuninori.morimoto.gx@renesas.com>
Date: Mon Jul 25 00:39:30 2011 -0700
usb: add usb_endpoint_maxp() macro
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: use __le16_to_cpu instead of le16_to_cpu]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
include/linux/usb/ch9.h | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
commit bba939f019
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:45 2011 +0300
usb: dwc3: gadget: fix DMA offset calculation
Fix offset calculation in dwc3_trb_dma_offset()
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 4281539e1d
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:44 2011 +0300
usb: dwc3: gadget: make DWC3_EP_WEDGE do the right thing
This makes DWC3_EP_WEDGE do the right thing, which is
prevent DWC3_EP_WEDGE from ever being cleared by a
ClearFeature(HALT) command.
[ balbi@ti.com : allowed set_wedge to send SetHalt command
to controller ]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
commit df7a63dc19
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:43 2011 +0300
usb: dwc3: gadget: driver should not wait for RxFIFO to drain
An older version of the databook said to wait for the FIFO to
drain, but that has been removed from the newer databooks.
Waiting for RxFIFO to drain caused problems when testing against
one of the host controllers available in the market.
After talking to one of the RTL engineers, he stated that we
should _not_ wait for RxFIFO to drain.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 19 -------------------
1 files changed, 0 insertions(+), 19 deletions(-)
commit a6544d0e1c
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:42 2011 +0300
usb: dwc3: gadget: fix DEPSTARTCFG for non-EP0 EPs
DEPSTARTCFG for non-EP0 EPs must only be sent once per config
[ balbi@ti.com : changed config_start to start_config_issued ]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/ep0.c | 1 +
drivers/usb/dwc3/gadget.c | 10 +++++++++-
3 files changed, 12 insertions(+), 1 deletions(-)
commit 9342a6f8b0
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 30 10:58:41 2011 +0300
usb: dwc: remove "All rights reserved" statement.
Some people think that this line is not compatible with the GPL. The
statement was required due to the Buenos Aires Convention and is now
deprecated. I remove it because it is said that it is pointless nowdays.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 1 -
drivers/usb/dwc3/core.h | 1 -
drivers/usb/dwc3/debug.h | 1 -
drivers/usb/dwc3/debugfs.c | 1 -
drivers/usb/dwc3/dwc3-omap.c | 1 -
drivers/usb/dwc3/dwc3-pci.c | 1 -
drivers/usb/dwc3/ep0.c | 1 -
drivers/usb/dwc3/gadget.c | 1 -
drivers/usb/dwc3/gadget.h | 1 -
drivers/usb/dwc3/io.h | 1 -
10 files changed, 0 insertions(+), 10 deletions(-)
commit f8336a2d5b
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 30 10:58:40 2011 +0300
usb: dwc3: ep0: fix debug output
Use "ep0in" and "ep0out" instead "ep1in" and "ep0out" which is confusing
and not consistent with the remaining output.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 9b580c9667
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 30 10:58:39 2011 +0300
usb: dwc3: ep0: remove second giveback in error case
We already give requests back in dwc3_ep0_stall_and_restart() so
doing it again here will most likely corrupt the list.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
commit b55ee45356
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:38 2011 +0300
usb: dwc3: ep0: fix debug message
The way it was before was really meaningless.
Now it looks saner.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
commit 0788d7b5e6
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:37 2011 +0300
usb: dwc3: ep0: ignore direction on 2-stage transfer
We don't need to care about direction on a two stage
transfer.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
commit b7139d3e59
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:36 2011 +0300
usb: dwc3: ep0: Make USB30CV happy with SetAddress
According to USB 3.0 Specification, a SetAddress()
while device is in Configured State has an unspecified
behavior (see Section 9.4.6). Still USB30CV wasn't
happy with my Stall reply.
To make that thing happy, just accept the SetAddress()
always. No problems have been observed thus far.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 31 +++++++++----------------------
1 files changed, 9 insertions(+), 22 deletions(-)
commit 6edd5bdb3b
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 21:18:47 2011 +0300
usb: dwc3: gadget: improve debug on link state change
It's useful to know which states core is going
through, as it might help us figure out misbehavior
on specific link states.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 29561f1886
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Sep 6 10:56:51 2011 +0300
usb: dwc3: omap: set idle and standby modes
For now, let's disable IDLE and STANDBY transitions
until we have a real HW to validate against.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
commit ecc99439be
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 18:27:33 2011 +0300
usb: dwc3: ep0: introduce ep0_expect_in flag
This flag will tell us which direction we're
expecting on the next (data or status) phase.
It will help us catching errors of host going
crazy and requesting data of the wrong direction.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/ep0.c | 16 ++++++++++++++++
2 files changed, 18 insertions(+), 0 deletions(-)
commit 4454f03ef0
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 18:17:12 2011 +0300
usb: dwc3: ep0: giveback requests on stall_and_restart
if we don't, the list will be busy forever.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
commit d3ba9a9d63
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 18:16:21 2011 +0300
usb: dwc3: gadget: drop the useless dma_sync_single* calls
if req->dma isn't DMA_ADDR_INVALID it means gadget driver
mapped the request or allocated from coherent, so it's
unnecessary to do anything.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 9 ---------
1 files changed, 0 insertions(+), 9 deletions(-)
commit d195b32c82
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 17:42:11 2011 +0300
usb: dwc3: gadget: fix GCTL programming
ensure a few bits are cleared before enabling
what we need.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
commit e207db6804
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 17:41:00 2011 +0300
usb: dwc3: define ScaleDown macro helper
We must ensure that those bits aren't set as
they should only be used in simulation.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit 18b26f81d3
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 17:39:59 2011 +0300
usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN
that should be 1 << 16, not 16. Caused so many
problems and we never caught it before.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 4ae8e1c5f7
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Wed Aug 31 17:12:02 2011 +0200
usb: dwc3: gadget: do not map/unmap ZLP transfers
If the gadget drivers sends a ZLP we are trying to map this this request
which does not work on all implementations. So we simply skip mapping
it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
commit 5248ed14ac
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Sep 6 12:00:39 2011 +0300
usb: dwc3: omap: fix IRQ handling
In order to ACK the IRQ we must write back
to the same register the bits we read.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 39 ++++++++++++---------------------------
1 files changed, 12 insertions(+), 27 deletions(-)
commit 6e8585e672
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Sep 6 10:57:41 2011 +0300
usb: dwc3: omap: change IRQ name to dwc3-omap
dwc3-wrapper can be used by any other wrapper,
using dwc3-omap makes it clear that we're running
on OMAP SoC.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 8ff9be9a57
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Sep 5 13:37:28 2011 +0300
usb: dwc3: add module.h to dwc3-omap.c and core.c
We need that header because of THIS_MODULE.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 1 +
drivers/usb/dwc3/dwc3-omap.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
commit 6f33e1af1a
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 22:26:25 2011 +0300
usb: dwc3: omap: distinguish between SW and HW modes
The OMAP wrapper allows us to either control internal
OTG signals via SW or HW. Different boards might wish
to use one or the other mode of operation. Let's have
have that information passed via platform_data for now.
After DT conversion is finished for OMAP, we can easily
convert this to a DT attribute.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 22 ++++++++++++++
include/linux/platform_data/dwc3-omap.h | 47 +++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+), 0 deletions(-)
commit 201d9a02ee
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 18:33:43 2011 +0300
usb: dwc3: omap: drop DEV_PM_OPS for now
We need to have actual HW in order to implement
and test that part of the code anyway. Until then
it's best to remove it.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 41 -----------------------------------------
1 files changed, 0 insertions(+), 41 deletions(-)
commit c6aa9939cb
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 18:22:01 2011 +0300
usb: dwc3: omap: use the macro we already have
trivial patch, no functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
commit e4b324671d
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 14:52:52 2011 +0300
usb: dwc3: omap: do not enable DMA Disable Clear IRQ
Otherwise that IRQ will trigger forever. It's quite
unnecessary.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
commit c93695d156
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 14:46:16 2011 +0300
usb: dwc3: omap: fix dev_dbg() calls
dev_dbg() macro expects a device pointer as
argument, not a memory base address.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
commit 665b9c7f97
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:52:17 2011 +0300
usb: dwc3: use ep0_next_event field
Start tracking the next expected event and act
on the error conditions as suggested by databook.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 40 ++++++++++++++++++++++++++++++++++++----
1 files changed, 36 insertions(+), 4 deletions(-)
commit 4f072fa1d0
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:50:40 2011 +0300
usb: dwc3: core: add ep0_next_event field
this field will hold the next expected event.
In certain cases, host might fall into some error
condition and ask from us the wrong Control phase.
On such situations, we should stall and restart.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
commit aa7b4d0d1f
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:48:08 2011 +0300
usb: dwc3: drop EP0_STALL state
Whenever we issue a Set Stall command on EP0,
the state machine will be restarted and Stall
is cleared automatically, when core receives
the next SETUP packet.
There's no need to track that EP0_STALL state.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 1 -
drivers/usb/dwc3/ep0.c | 2 --
drivers/usb/dwc3/gadget.c | 10 ++++++++--
3 files changed, 8 insertions(+), 5 deletions(-)
commit 0054d1193f
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:54:53 2011 +0300
usb: dwc3: ep0: clear all EP0 flags
when we're going to issue Set Stall command,
we should clear DWC3_EP_STALL flag, but also
we should clear BUSY, HALTED and all others.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit c0478e0f39
Author: Felipe Balbi <balbi@ti.com>
Date: Wed Aug 31 11:51:43 2011 +0300
usb: dwc3: ep0: fix Get Status handling
data was prepared on setup_buf but transfer
was started on ctrl_req, fix it.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 6062cac8e2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 16:46:38 2011 +0200
usb: dwc3: gadget: replace mdelay with udelay in the busy loop
There are two spots where we wait until the HW finishes processing a
certain command. Initially we had a few problems and we used 500ms as a
limit to be on a the safe side. Paul Zimmerman mentioned this is little too
much. After a debugging session, we noticed that we hardly ever go over 20us
and didn't pass 30usec so far. Using mdelay() seems way overloaded.
Giving the current numbers 500usec as the upper limit is more than enough.
Should it ever timeout then something is definitely wrong.
While here, also replace the type with u32 since long does not really
fit here.
Cc: Paul Zimmerman <paul.zimmerman@synopsys.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 12 ++++--------
1 files changed, 4 insertions(+), 8 deletions(-)
commit b55db3bb7e
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 13:56:37 2011 +0200
usb: dwc3: gadget: rework the dequeue on RESET & DISCONNECT
- since a while we are disabling an endpoint and purging every requests on
RESET and DISCONNECT which leads to a warning since the endpoint was
disabled twice (once by the UDC, and second time by the gadget). I
think UDC should nuke all requests because all those requests
become invalid. It's gadget driver's responsability, though, to disable
its used endpoints. This is done by merging dwc3_stop_active_transfer()
and dwc3_gadget_nuke_reqs() into dwc3_remove_requests().
- dwc3_stop_active_transfer() is now no longer called unconditionaly.
This has the advantage that it is always called to disable an active
transfer which means if res_trans_idx 0 than something went wrong and
it is an error condition because we can't clean up the requests.
- Remove the DWC3_EP_WILL_SHUTDOWN which was introduced while
introducing the command complete part for dequeue. All requests on
req_queued list should be removed during the dwc3_cleanup_done_reqs()
callback so there is no reason to go through the list again.
We consider it an error condition if requests are still on this
list since we never queue TRB without LST=1 (the last requests has
always LST=1, there are no requests with LST=0 behind it).
[ balbi@ti.com : reworked commit log a bit, made patch apply ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 1 -
drivers/usb/dwc3/gadget.c | 31 ++++++++++++-------------------
2 files changed, 12 insertions(+), 20 deletions(-)
commit fe2b0910d5
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 13:56:36 2011 +0200
usb: dwc3: core: move the core check before soft reset
We read the DWC3_GSNPSID register to make sure we got the correct
register offset passed. One of the recent commits moved the soft reset
before this so in case of the wrong offset we end up with "reset timed
out". This patch moves the "id" check before the reset again.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 19 +++++++++----------
1 files changed, 9 insertions(+), 10 deletions(-)
commit 9665fdff2c
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 13:56:35 2011 +0200
usb: dwc3: debugfs: remove test mode interface
There are some issues around for enabling/disabling this mode and
handling it. It does not work perfectly (yet). However we have a few
gadgets tested successfuly so far. That means we are quite confident
that we won't need this in near future.
So I'm for removing it and bringing a working version back once there is
a need for it.
Thanks to Dan Carpenter who spotted the wrong memory handling here.
[ balbi@ti.com : made it actually apply ]
Cc: Dan Carpenter <error27@gmail.com>
Cc: wharms@bfs.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/debugfs.c | 94 --------------------------------------------
1 files changed, 0 insertions(+), 94 deletions(-)
commit 32e132e3ea
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:28:36 2011 +0300
usb: dwc3: ep0: simplify EP0 state machine
The DesignWare USB3 core tells us which phase
of a control transfer should be started, it
also tells us which physical endpoint needs
that transfer.
With these two informations, we have all we
need to simply EP0 handling quite a lot and
get rid rid of the SW state machine tracking
ep0 states.
For achieving this perfectly, we needed to
add support for situations where we get
XferNotReady while endpoint is still busy
and XferNotReady while gadget driver still
hasn't queued a request.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 12 +-
drivers/usb/dwc3/ep0.c | 363 ++++++++++++++++++++-------------------------
drivers/usb/dwc3/gadget.c | 3 +-
3 files changed, 163 insertions(+), 215 deletions(-)
commit edb4e77ef4
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:26:00 2011 +0300
usb: dwc3: core: add flag for EP0 direction
Add a flag to keep track of ep0 direction.
This flag will be used on a following patch.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
commit 31d1e80389
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:18:09 2011 +0300
usb: dwc3: ep0: add handling for unaligned OUT transfers
In case we have transfers which aren't aligned
to wMaxPacketSize, we need to be careful with
how we start the transfer with the HW. OUT
transfers _must_ be aligned with wMaxPacketSize
and in order to guarantee that, we use a bounce
buffer.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 37 ++++++++++++++++++++++++++++++++-----
1 files changed, 32 insertions(+), 5 deletions(-)
commit 64e9634b21
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:07:53 2011 +0300
usb: dwc3: add a bounce buffer for control endpoints
This core cannot handle OUT transfers which aren't
aligned to wMaxPacketSize, but that can happen at
least on control endpoint with the USB Audio Class.
This patch adds a bounce buffer to be used on the
case of a non-aligned ep0out request is queued.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 29 ++++++++++++++++++++++-------
2 files changed, 28 insertions(+), 7 deletions(-)
commit 6cd800e879
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:04:32 2011 +0300
usb: dwc3: core: add defines for XferNotReady event on Control EPs
The status field of the Transfer Not Read event
is different on Control Endpoints. On this patch
we are just adding the defines to be used on a
later patch which will re-work the control endpoint
handling.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
commit c7dbe4f213
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 20:29:58 2011 +0300
usb: dwc3: gadget: improve command completion debug message
the previous message had too little meaning. Make
it more human readable and use the macro we already
had for extracting the command completion status out
of DEPCMDn register.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 162e128db0
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 15:10:09 2011 +0300
usb: dwc3: gadget: set request dma to invalid when unmapping
if we don't set DMA address to invalid when unmapping,
we might fall in a situation where request buffer
can't be mapped to DMA again.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit ff4e987bcf
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 02:30:33 2011 +0300
usb: dwc3: ep0: fix 'transfered' typo
trivial patch. No functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
commit 7a769ecc90
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 01:40:52 2011 +0300
usb: dwc3: core: add missing @ for kerneldoc
trivial patch, no functional changes
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
commit e918b57dc8
Author: Dan Carpenter <error27@gmail.com>
Date: Fri Aug 26 12:21:13 2011 +0300
usb: dwc3: debugfs: add a kfree() on error to dwc3_testmode_open()
We may as well fix this potential leak so we don't have to listen to
the static checkers complain.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/debugfs.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
commit b31b612847
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 22 18:29:13 2011 +0200
usb: dwc3: gaget: clear DWC3_EP_WILL_SHUTDOWN bit
Without this patch we won't clear that bit and instead will
clear all other bits on our endpoint flag.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 15623d7087
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 22 17:42:19 2011 +0200
usb: dwc3: gadget: use TRB type 6 for ISOC transfers
Type 6 should be used for the first transfer during an interval. This is
also what the reference driver is using. Type 7 seems to be for following
or additional transfers within the same interval.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 4df3977d9f
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 22 17:42:18 2011 +0200
usb: dwc3: gadget: reset resource index to zero
If we collected two requests together (i.e. only the last of them has
LST=1) then we only have to stop transfer once: The clean-up code will
cleanup everything until first TRB with the LST bit set.
After XferComplete this index should be no longer valid since there is
no transfer pending.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
commit 679dc46637
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Aug 19 19:59:12 2011 +0200
usb: dwc3: gadget: fixing dequeue of TRBs
A TRB which is dequeued seems to have its HWO bits set to 1. Therefore
we ignore it if we dequeue it after the command is completed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
commit d9a09a239e
Author: Randy Dunlap <rdunlap@xenotime.net>
Date: Tue Aug 23 12:52:47 2011 -0700
usb: fix dwc3 build when USB_GADGET_DWC3 is not enabled
Fix build error when CONFIG_USB_GADGET_DWC3 is not enabled:
ERROR: "dwc3_send_gadget_ep_cmd" [drivers/usb/dwc3/dwc3.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
commit faea001704
Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue Aug 23 15:08:54 2011 +1000
usb: include module.h in the DesignWare USB3 DRD driver
Fixes this build error:
drivers/usb/dwc3/dwc3-pci.c: In function 'dwc3_pci_init':
drivers/usb/dwc3/dwc3-pci.c:211:9: error: 'THIS_MODULE' undeclared (first use in this function)
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-pci.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit 4dc64e52bd
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Aug 19 18:10:58 2011 +0300
usb: dwc3: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: gadget_chips.h: Use 'gadget_is_dwc3(g)' only if
CONFIG_USB_GADGET_DWC3 is defined.]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Documentation/usb/dwc3.txt | 53 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 2 +
drivers/usb/dwc3/Kconfig | 25 +
drivers/usb/dwc3/Makefile | 36 +
drivers/usb/dwc3/core.c | 467 +++++++++
drivers/usb/dwc3/core.h | 709 +++++++++++++
drivers/usb/dwc3/debug.h | 51 +
drivers/usb/dwc3/debugfs.c | 534 ++++++++++
drivers/usb/dwc3/dwc3-omap.c | 410 ++++++++
drivers/usb/dwc3/dwc3-pci.c | 219 ++++
drivers/usb/dwc3/ep0.c | 782 ++++++++++++++
drivers/usb/dwc3/gadget.c | 2063 +++++++++++++++++++++++++++++++++++++
drivers/usb/dwc3/gadget.h | 292 ++++++
drivers/usb/dwc3/io.h | 55 +
drivers/usb/gadget/Kconfig | 12 +
drivers/usb/gadget/gadget_chips.h | 4 +
17 files changed, 5716 insertions(+), 0 deletions(-)
commit 348a4c2038
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Aug 19 18:10:57 2011 +0300
usb: gadget: introduce gadget_is_dwc3()
... to check whether we're running on DesignWare
USB3 DRD Controller.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Conflicts: gadget_chips.h]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/gadget_chips.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
Change-Id: I12d5f2f957d39b2ff8031366994689bcd453f213
Signed-off-by: David Brown <davidb@codeaurora.org>
Also, add more generic cpu type identification logic
to remove having to modify code each time a new target
variant comes out.
Change-Id: I9493ffad0960ab4863205191937ea5c56be97de2
Signed-off-by: Dixon Peterson <dixonp@codeaurora.org>
This function is called from more places than just exit
functions. Also remove the _init/__exit markings from the header
file as they're not necessary in function prototypes.
WARNING: vmlinux.o(.devinit.text+0x7840): Section mismatch in
reference from the function pm8038_add_subdevices() to the
function .devexit.text:pm8xxx_irq_exit()
The function __devinit pm8038_add_subdevices() references
a function __devexit pm8xxx_irq_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
pm8xxx_irq_exit() so it may be used outside an exit section.
Change-Id: I0d2e285a03958e0fe68af48df94523aa1d0476c0
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This change implements the docking station detection by reading the status
of MPP9 on PMIC8921. With this change VREG_5V(USB port 3 VBUS) is turned on
only when docking station is connected to Liquid platform in order to save
power.
Change-Id: I4282b4273adabf8aeaf8faad43cd2cfff36eeac6
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
This patch adds the support of the HS200 bus speed for eMMC 4.5 devices.
The eMMC 4.5 devices have support for 200MHz bus speed. The function
prototype of the tuning function is modified to handle the tuning
command number which is different in sd and mmc case.
Change-Id: If52eab150592d96adb58d98ec19110fe43d2fbc0
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
[subhashj@codeaurora.org: Fixed merge conflicts and compilation errors]
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Linux Build Service Account
Wei Zou
Carter Cooper
Siddartha Mohanadoss
Joonwoo Park
David Keitel
Pavan Kumar
Sujit Reddy Thumma
David Collins
Benoit Cousson
Harsh Vardhan Dwivedi
Shalabh Jain
Deva Ramasubramanian
Michael Bohan
Abhijeet Dharmapurikar
Sunil Dutt Undekari
Vijayavardhan Vennapusa
Olav Haugan
David Brown
Dixon Peterson
Stephen Boyd
Hemant Kumar
Girish K S