Drivers need to specify their bandwidth requirements to
bus-scaling driver to get guaranteed bandwidth on fabrics.
USB hardware uses a single buffer to transfer data across the
bus. As a result USB performance is highly dependent on system
fabric frequency as USB controller continuously sends NAKs on
the USB BUS unless complete buffer is filled/drained to the memory.
Hence, request for high bus bandwidth as long as USB cable is
connected to improve USB throughput.
While testing with Class-10 Extreme III SD cards, this patch
seems to improve the IN performance from 15MBps to 24MBps and
OUT performance from 11MBps to 16MBps.
CRs-Fixed: 327557
Change-Id: I21c284c611a09b1b12df9ae7a6f39e0b1bff45ef
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
This change adds SPMI Device Tree parsing. The
of_spmi_register_devices() API should be called from the probe()
routine of each SPMI controller to parse the subtree and add the
respective SPMI devices.
The SPMI subtree is nested up to two levels deep. The first level
is the most basic and treats the address as the SPMI slave ID.
This should be used for simple devices that has no notion of
segmented SPMI address spaces.
An optional second level specifies the address as an offset
within the outer layer's slave ID. This is used to specify
multiple devices on the same slave ID that have different address
ranges. In fact, it's reasonable to specify any number of address
ranges at this level.
Devices can also specify any number of interrupts that's decoding
is done by an external interrupt device.
Sections of this code were taken from drivers/of/platform.c.
Change-Id: Ib9f06764a9bd85e3b2aab43b72aa7132885aa044
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
The WLAN driver needs to know the device serial number. This change
introduces a sysfs entry to allow userspace to configure the serial
number, and exports an API which allows WLAN and other wireless
technologies to query the serial number.
CRs-Fixed: 334945
Change-Id: Ib3937bef172ecf471d35cf3554289321531c5ea0
Signed-off-by: Jeff Johnson <jjohnson@codeaurora.org>
Merge a backport of the following 82 commits from the 3.2 kernel.
commit 6668ab6822
Author: Yu Xu <yuxu@marvell.com>
Date: Sat Dec 10 00:03:33 2011 +0800
usb: gadget: storage: release superspeed descriptors.
Release superspeed mass storage descriptors memory
when the function is unbind.
Signed-off-by: Yu Xu <yuxu@marvell.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit 7d4b554346
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Oct 3 16:39:30 2011 +0300
usb: gadget: core: fix bug when removing gadget drivers
usb_gadget_disconnect() is responsible of removing
data pullups. Before doing that we must, first, tell
gadget driver we're disconnecting (by calling disconnect
method on gadget driver structure), unbind the gadget
driver and stop the controller.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/udc-core.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 6a9a34559d
Author: Felipe Balbi <balbi@ti.com>
Date: Wed Aug 3 13:33:27 2011 +0200
usb: gadget: storage: add superspeed support
this patch adds superspeed descriptors for the
storage gadgets.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[idos@codeaurora.org: Conflicts: drivers/usb/gadget/storage_common.c]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 22 ++++++
drivers/usb/gadget/file_storage.c | 59 +++++++++++++---
drivers/usb/gadget/mass_storage.c | 2 +-
drivers/usb/gadget/storage_common.c | 127 +++++++++++++++++++++++++++++++++++
4 files changed, 199 insertions(+), 11 deletions(-)
commit 9e42b8b008
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Oct 10 09:43:44 2011 +0300
usb: gadget: fix typo for default U1/U2 exit latencies
s/DEFULT/DEFAULT/, no functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 4 ++--
include/linux/usb/gadget.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
commit 8d9e8ba25f
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 15:26:06 2011 -0700
usb: gadget: storage: fix mass storage gadgets to work with Synopsys UDC
The Synopsys USB device controller requires all OUT transfer request
lengths to be aligned to max packet size. The mass storage gadgets do
not meet this requirement for Super Speed. The gadgets already have a
function which performs this alignment for CBW packets, so use it for
data packets too.
The alternative would be to implement bounce buffers in the DWC3
driver, but that could have a significant impact on performance.
This version is based upon a more-correct patch written by Alan
Stern.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 18 +++++++++---------
drivers/usb/gadget/file_storage.c | 18 +++++++++---------
2 files changed, 18 insertions(+), 18 deletions(-)
commit 9967085375
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Thu Aug 18 20:29:00 2011 +0200
USB: gadget: storage: remove alignment assumption
This patch (as1481) fixes a problem affecting g_file_storage and
g_mass_storage when running at SuperSpeed. The two drivers currently
assume that the bulk-out maxpacket size can evenly divide the SCSI
block size, which is 512 bytes. But SuperSpeed bulk endpoints have a
maxpacket size of 1024, so the assumption is no longer true.
This patch removes that assumption from the drivers, by getting rid of
a small optimization (they try to align VFS reads and writes on page
cache boundaries). If a command's starting logical block address is
512 bytes below the end of a page, it's not okay to issue a USB
command for just those 512 bytes when the maxpacket size is 1024 -- it
would result in either babble (for an OUT transfer) or a short packet
(for an IN transfer).
Also, for backward compatibility, the test for writes extending beyond
the end of the backing storage has to be changed. If the host tries
to do this, we should accept the data that fits in the backing storage
and ignore the rest. Because the storage's end may not align with a
USB packet boundary, this means we may have to accept a USB OUT
transfer that extends beyond the end of the storage and then write out
only the part of the data that fits.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[idos@codeaurora.org: Conflicts: drivers/usb/gadget/f_mass_storage.c
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 64 ++++++++++++---------------------
drivers/usb/gadget/file_storage.c | 67 ++++++++++++++---------------------
2 files changed, 50 insertions(+), 81 deletions(-)
commit 70847f6eed
Author: Peiyu Li <peiyu.li@csr.com>
Date: Wed Aug 17 22:52:59 2011 -0700
usb: gadget: storage: adapt logic block size to bound block devices
Now the mass storage driver has fixed logic block size of 512 bytes.
The mass storage gadget read/write bound devices only through VFS, so the
bottom level devices actually are just RAW devices to the driver and connected
PC. As a RAW, hosts can always format, read and write it right in 512 bytes
logic block and don't care about the actual logic block size of devices bound
to the gadget.
But if we want to share the bound block device partition between target board
and PC, in case the logic block size of the bound block device is 4KB, we
execute the following steps:
1. connect a board with mass storage gadget to PC(the board has set one
partition of on-board block device as file name of the mass storage)
2. PC format the mass storage to VFAT by default logic block size and
read/write it
3. disconnect boards from PC
4. target board mount the partition as VFAT
Step 4 will fail since kernel on target thinks the logic block size of the
bound partition as 4KB.
A typical error is "FAT: logical sector size too small for device (logical
sector size = 512)"
If we execute opposite steps:
1. format the partition to VFAT on target board and read/write this partition
2. connect the board to Windows PC as usb mass storage gadget, windows will
think the disk is not formatted
So the conclusion is that only as a gadget, the mass storage driver has no any
problem. But being shared VFAT or other filesystem on PC and target board, it
will fail.
This patch adapts logic block size to bound block devices and fix the issue.
Cc: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peiyu Li <peiyu.li@csr.com>
Signed-off-by: Xianglong Du <xianglong.du@csr.com>
Signed-off-by: Huayi Li <huayi.li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/f_mass_storage.c | 63 ++++++++++++++++++++--------------
drivers/usb/gadget/file_storage.c | 50 +++++++++++++--------------
drivers/usb/gadget/storage_common.c | 23 ++++++++++---
3 files changed, 79 insertions(+), 57 deletions(-)
commit a713c15157
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Dec 19 13:45:01 2011 +0200
usb: gadget: epautoconf: do not change number of streams
We should not change gadget driver's descriptors just
because we think it's right to do so.
There are several of reasons which would support this
statement but it suffices to say that this was probably
never tested because it updates bmAttributes without
asking the driver if it's ok to do so.
This means that e.g. on UASP gadget it would enable
stream support even for the command endpoint which must
not have stream support enabled.
In fact, this change is fixing the bug introduced by
commit a59d6b9 (usb: gadget: add streams support to
the gadget framework) which was caught when testing
UASP gadget with dwc3 driver.
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/epautoconf.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
commit 61a3b903ab
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Thu Jun 23 14:26:15 2011 +0200
usb: gadget: udc-core: add "new-style" registration interface
udc_start() should only trigger the internal state machine and make
minimal house keeping. Before that call udc-core calls the bind()
callback and after the callback the pullup().
udc_stop() is simillar, udc-core calls pullup(), unbind() and finally
udc_stop().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/udc-core.c | 75 ++++++++++++++++++++++++++++++++++++++--
include/linux/usb/gadget.h | 6 +++
2 files changed, 77 insertions(+), 4 deletions(-)
commit 908f577884
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Thu Jun 23 14:26:11 2011 +0200
usb: gadget: defer setting maxpacket till ->setup()
maxpacket is set by the udc driver for ep0 very early. This value is
copied by the function gadget used later for the USB_DT_DEVICE and
USB_DT_DEVICE_QUALIFIER query. This seems to work fine so far. For USB3
we need set a different value here. In SS speed it is 2^x with x=9 and
in HS we set something <= 64. If the UDC starts in SS and continues in
HS after the cable has been plugged it will report a too small value.
There setting of this value is defered and taken automaticly from the
ep0 pointer where the UDC driver can update it according to the speed it
detected _after_ a cable has been plugged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 3 +--
drivers/usb/gadget/dbgp.c | 2 +-
drivers/usb/gadget/file_storage.c | 10 ++++++----
drivers/usb/gadget/gmidi.c | 3 +--
drivers/usb/gadget/inode.c | 5 ++---
drivers/usb/gadget/printer.c | 14 +++++++++-----
6 files changed, 20 insertions(+), 17 deletions(-)
commit 355527ba15
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Wed Jun 29 16:41:50 2011 +0300
usb: gadget: add SuperSpeed support to the Gadget Framework
SuperSpeed USB has defined a new descriptor, called
the Binary Device Object Store (BOS) Descriptor. It
has also changed a bit the definition of SET_FEATURE
and GET_STATUS requests to add USB3-specific details.
This patch implements both changes to the Composite
Gadget Framework.
[ balbi@ti.com : slight changes to commit log
fixed a compile error on ARM ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/Kconfig | 6 +
drivers/usb/gadget/composite.c | 257 ++++++++++++++++++++++++++++++++++++---
drivers/usb/gadget/epautoconf.c | 6 +-
include/linux/usb/composite.h | 14 ++
include/linux/usb/gadget.h | 31 +++++
5 files changed, 293 insertions(+), 21 deletions(-)
commit fd11902012
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Wed Jun 29 16:41:49 2011 +0300
usb: gadget: add max_speed to usb_composite_driver
This field is used by the Gadget drivers to specify
the maximum speed they support, meaning: the maximum
speed they can provide descriptors for.
The driver speed will be set in consideration of this
value.
[ balbi@ti.com : dropped the ifdeffery ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/audio.c | 1 +
drivers/usb/gadget/cdc2.c | 1 +
drivers/usb/gadget/composite.c | 2 ++
drivers/usb/gadget/ether.c | 1 +
drivers/usb/gadget/g_ffs.c | 1 +
drivers/usb/gadget/hid.c | 1 +
drivers/usb/gadget/mass_storage.c | 1 +
drivers/usb/gadget/multi.c | 1 +
drivers/usb/gadget/ncm.c | 1 +
drivers/usb/gadget/nokia.c | 1 +
drivers/usb/gadget/serial.c | 1 +
drivers/usb/gadget/webcam.c | 1 +
drivers/usb/gadget/zero.c | 1 +
include/linux/usb/composite.h | 2 ++
14 files changed, 16 insertions(+), 0 deletions(-)
commit 24728e0ee2
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:53 2011 +0300
usb: gadget: add streams support to the gadget framework
This patch defines necessary fields to support
streaming for USB3.0.
It implements a new function, called
usb_ep_autoconfig_ss(), to be used instead of the
existing usb_ep_autoconfig() when working in
SuperSpeed mode and there is a need to search for
an endpoint according to the number of required
streams.
[ balbi@ti.com : slight changes to commit log ]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/epautoconf.c | 125 +++++++++++++++++++++++++++++++--------
include/linux/usb/gadget.h | 13 ++++
2 files changed, 113 insertions(+), 25 deletions(-)
commit 9781f7d1c6
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:52 2011 +0300
usb: gadget: coding style fix
fix the coding style of a few switches on the
gadget framework.
[ balbi@ti.com : add a commit log ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 16 ++++++++++---
drivers/usb/gadget/dummy_hcd.c | 48 ++++++++++++++++++++++++++++++----------
2 files changed, 48 insertions(+), 16 deletions(-)
commit ebd3f395ba
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:50 2011 +0300
usb: gadget: use config_ep_by_speed() instead of ep_choose()
Remove obsolete functions:
1. ep_choose()
2. usb_find_endpoint()
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Changed also the following files to
comply with this commit: f_accessory.c,f_adb.c,f_diag.c,f_mtp.c,
f_rmnet.c,f_rmnet_sdio,f_rmnet_smd,f_rmnet_smd_sdio,f_serial.f_ccid.c.
Also merged a patch in f_serial.c for correct checking of the return value
of config_ep_by_speed. See "usb: gadget: fix g_serial regression".
Also fix a bug in ci13xxx_udc. Since f_serial is now checking if the endpoint
descriptors are null in the set_alt function, need to set them to null on
ep_disable in case of cable disconnect. Since the ep descriptor was inserted
to struct usb_ep in "usb: gadget: add usb_endpoint_descriptor to struct usb_ep"
then simply convert the ci13xxx_udc to work with mEp->ep.desc instead of
mEp->desc, this will ensure that the correct descriptor will be cleared
on endpoint disable.
I will upstream it to Linux community soon, I will name it:
"usb: gadget: use usb ep descriptor of struct usb_ep instead of wrapper desc"]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/ci13xxx_udc.c | 16 ++++----
drivers/usb/gadget/ci13xxx_udc.h | 1 -
drivers/usb/gadget/config.c | 26 -------------
drivers/usb/gadget/f_accessory.c | 30 +++++++++++-----
drivers/usb/gadget/f_acm.c | 46 +++++++-----------------
drivers/usb/gadget/f_adb.c | 30 +++++++++++----
drivers/usb/gadget/f_ccid.c | 54 +++++++++++-----------------
drivers/usb/gadget/f_diag.c | 13 ++++---
drivers/usb/gadget/f_ecm.c | 45 +++++++----------------
drivers/usb/gadget/f_eem.c | 32 +++++------------
drivers/usb/gadget/f_hid.c | 19 +++-------
drivers/usb/gadget/f_loopback.c | 11 ++++--
drivers/usb/gadget/f_mass_storage.c | 46 ++++++++++--------------
drivers/usb/gadget/f_mtp.c | 30 +++++++++++----
drivers/usb/gadget/f_ncm.c | 49 ++++++++------------------
drivers/usb/gadget/f_obex.c | 32 +++++------------
drivers/usb/gadget/f_phonet.c | 12 +++---
drivers/usb/gadget/f_rmnet.c | 48 ++++++++-----------------
drivers/usb/gadget/f_rmnet_sdio.c | 62 ++++++++++++++++++++++++++------
drivers/usb/gadget/f_rmnet_smd.c | 38 +++++++++++++++-----
drivers/usb/gadget/f_rmnet_smd_sdio.c | 63 ++++++++++++++++++++++++++------
drivers/usb/gadget/f_rndis.c | 46 +++++++-----------------
drivers/usb/gadget/f_serial.c | 55 +++++++++-------------------
drivers/usb/gadget/f_sourcesink.c | 8 +++-
drivers/usb/gadget/f_subset.c | 29 +++------------
drivers/usb/gadget/file_storage.c | 12 ++++++
drivers/usb/gadget/storage_common.c | 11 ------
include/linux/usb/composite.h | 15 --------
include/linux/usb/gadget.h | 6 ---
29 files changed, 400 insertions(+), 485 deletions(-)
commit e2a9f931cc
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:49 2011 +0300
usb: gadget: configure endpoint according to gadget speed
Add config_ep_by_speed() to configure the endpoint
according to the gadget speed.
Using this function will spare the FDs from handling
the endpoint chosen descriptor.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/composite.c | 85 +++++++++++++++++++++++++++++++++++++++
drivers/usb/gadget/epautoconf.c | 1 +
include/linux/usb/composite.h | 3 +
include/linux/usb/gadget.h | 3 +
4 files changed, 92 insertions(+), 0 deletions(-)
commit 9168a350f7
Author: Tatyana Brokhman <tlinder@codeaurora.org>
Date: Tue Jun 28 16:33:48 2011 +0300
usb: gadget: add usb_endpoint_descriptor to struct usb_ep
Change usb_ep_enable() prototype to use endpoint
descriptor from usb_ep.
This optimization spares the FDs from saving the
endpoint chosen descriptor. This optimization is
not full though. To fully exploit this change, one
needs to update all the UDCs as well since in the
current implementation each of them saves the
endpoint descriptor in it's internal (and extended)
endpoint structure.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Added more changes for the following files
since API break with msm code tree: ci13xxx_udc.c,f_accessory,f_adb,
f_diag,f_mtp,f_rmnet,f_rmnet_sdio,f_rmnet_smd, f_rmnet_smd_sdio,u_bam.c,
u_sdio.c,u_rmnet.h,u_sdio.c,u_smd.c,f_ccid.c,u_data_hsic.c]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/ci13xxx_udc.c | 6 ++++--
drivers/usb/gadget/dbgp.c | 8 +++++---
drivers/usb/gadget/f_accessory.c | 16 ++++++++++------
drivers/usb/gadget/f_acm.c | 9 ++++-----
drivers/usb/gadget/f_adb.c | 14 ++++++++------
drivers/usb/gadget/f_audio.c | 5 ++---
drivers/usb/gadget/f_ccid.c | 15 ++++++---------
drivers/usb/gadget/f_diag.c | 12 +++++-------
drivers/usb/gadget/f_ecm.c | 17 ++++++++---------
drivers/usb/gadget/f_eem.c | 10 +++++-----
drivers/usb/gadget/f_fs.c | 3 ++-
drivers/usb/gadget/f_hid.c | 5 ++---
drivers/usb/gadget/f_loopback.c | 14 ++++++--------
drivers/usb/gadget/f_mass_storage.c | 3 ++-
drivers/usb/gadget/f_mtp.c | 17 ++++++++++-------
drivers/usb/gadget/f_ncm.c | 17 ++++++++---------
drivers/usb/gadget/f_obex.c | 6 +++---
drivers/usb/gadget/f_phonet.c | 9 ++++-----
drivers/usb/gadget/f_rmnet.c | 9 ++++-----
drivers/usb/gadget/f_rmnet_sdio.c | 15 +++++++++------
drivers/usb/gadget/f_rmnet_smd.c | 15 +++++++++------
drivers/usb/gadget/f_rmnet_smd_sdio.c | 15 +++++++++------
drivers/usb/gadget/f_rndis.c | 15 +++++++--------
drivers/usb/gadget/f_serial.c | 9 ++++-----
drivers/usb/gadget/f_sourcesink.c | 10 ++++------
drivers/usb/gadget/f_subset.c | 8 ++++----
drivers/usb/gadget/f_uvc.c | 6 ++++--
drivers/usb/gadget/file_storage.c | 3 ++-
drivers/usb/gadget/gmidi.c | 6 ++++--
drivers/usb/gadget/inode.c | 6 ++++--
drivers/usb/gadget/printer.c | 26 ++++++++++++++------------
drivers/usb/gadget/u_bam.c | 8 ++++----
drivers/usb/gadget/u_data_hsic.c | 10 ++--------
drivers/usb/gadget/u_ether.c | 12 ++++++------
drivers/usb/gadget/u_ether.h | 4 ----
drivers/usb/gadget/u_rmnet.h | 2 --
drivers/usb/gadget/u_sdio.c | 4 ++--
drivers/usb/gadget/u_serial.c | 4 ++--
drivers/usb/gadget/u_serial.h | 2 --
drivers/usb/gadget/u_smd.c | 4 ++--
include/linux/usb/gadget.h | 16 +++++++---------
41 files changed, 197 insertions(+), 198 deletions(-)
commit 2baadcf481
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Tue Jun 28 16:33:47 2011 +0300
usb: gadget: convert all users to the new udc infrastructure
peripheral drivers are using usb_add_gadget()/usb_del_gadget() to
register/unregister to the udc-core.
The udc-core will take the first available gadget driver and attach
function driver which is calling usb_gadget_register_driver(). This is
the same behaviour we have right now.
Only dummy_hcd was tested, the others were compiled tested.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Roy Huang <roy.huang@analog.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: cxie4 <cxie4@marvell.com>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org:
Conflicts: drivers/usb/gadget/ci13xxx_udc.c
msm72k_udc.c: This driver is not exists in Linux community,so fix this one too.
cyasgadget.c: combine other patch from the community ("convert cyasgadget to new udc core")
into this commit. Removed the #if 0 block that was in the community version and fix
the cause problem, because of which it was under #if 0 block]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
.../staging/westbridge/astoria/gadget/cyasgadget.c | 26 ++++++++++++++--
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/amd5536udc.c | 18 ++++++++---
drivers/usb/gadget/at91_udc.c | 20 +++++++++---
drivers/usb/gadget/atmel_usba_udc.c | 26 ++++++++++++++--
drivers/usb/gadget/ci13xxx_udc.c | 30 ++++++++++++++-----
drivers/usb/gadget/dummy_hcd.c | 31 +++++++++++++------
drivers/usb/gadget/fsl_qe_udc.c | 20 ++++++++++--
drivers/usb/gadget/fsl_udc_core.c | 20 ++++++++++--
drivers/usb/gadget/fusb300_udc.c | 15 +++++++--
drivers/usb/gadget/goku_udc.c | 19 +++++++++---
drivers/usb/gadget/imx_udc.c | 20 +++++++++---
drivers/usb/gadget/langwell_udc.c | 20 ++++++++----
drivers/usb/gadget/m66592-udc.c | 17 ++++++++--
drivers/usb/gadget/msm72k_udc.c | 22 +++++++++++---
drivers/usb/gadget/mv_udc_core.c | 19 +++++++----
drivers/usb/gadget/net2280.c | 18 ++++++++---
drivers/usb/gadget/omap_udc.c | 22 +++++++++++---
drivers/usb/gadget/pch_udc.c | 16 +++++++--
drivers/usb/gadget/pxa25x_udc.c | 19 ++++++++----
drivers/usb/gadget/pxa27x_udc.c | 23 ++++++++++----
drivers/usb/gadget/r8a66597-udc.c | 15 +++++++--
drivers/usb/gadget/s3c-hsotg.c | 19 +++++++++--
drivers/usb/gadget/s3c-hsudc.c | 16 +++++++--
drivers/usb/gadget/s3c2410_udc.c | 29 +++++++++++-------
drivers/usb/musb/musb_gadget.c | 23 +++++++++++---
drivers/usb/renesas_usbhs/mod_gadget.c | 20 +++++++++---
27 files changed, 403 insertions(+), 141 deletions(-)
commit b657342882
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Jun 28 16:33:46 2011 +0300
usb: gadget: introduce UDC Class
this class will be used to abstract away several of the duplicated
operations scattered among the USB gadget controller drivers.
Later, we can add an atomic notifier to tell interested drivers about
what's happening with the controller. Notifications such as suspend,
resume, enumerated, etc. will be useful, at a minimum, for implementing
usb charger detection.
As part of the converting process usb_gadget_probe_driver() is no longer
part of each udc but pushed into the ->stap() callback. The same for his
couterpart.
The core is currently set explicit to 'n'. It will be changed to 'y' once
all users are converted since it provides functions which clash with
other drivers.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/udc-core.c | 418 +++++++++++++++++++++++++++++++++++++++++
include/linux/usb/gadget.h | 7 +
2 files changed, 425 insertions(+), 0 deletions(-)
commit 1e4eabf4be
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Aug 19 18:10:56 2011 +0300
usb: ch9: add function defines from ch9, USB 3.0 spec
not to confuse with Table 9-7 in USB 2.0 spec
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
include/linux/usb/ch9.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
commit 62118889b5
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri Sep 30 18:08:59 2011 -0400
usb: Add module.h to various dwc3 drivers
These files uses the full set of MODULE_ macros and so need to
include module.h directly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 1 +
drivers/usb/dwc3/dwc3-omap.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
commit 4d873c3377
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:51 2011 +0300
usb: dwc3: convert structures into bitshifts
our parameter structures need to be written to
HW, so instead of assuming little endian, we
convert those into bit shifts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 6 +-
drivers/usb/dwc3/gadget.c | 40 ++++++-------
drivers/usb/dwc3/gadget.h | 139 +++++++++------------------------------------
3 files changed, 48 insertions(+), 137 deletions(-)
commit cfca7a78c5
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:50 2011 +0300
usb: dwc3: gadget: allow clock gating to work
The dwc3 core has internal clock gating support.
Let's allow that to happen by clearing the disable
bit in GCTL register.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 8 ++++++++
2 files changed, 14 insertions(+), 0 deletions(-)
commit 6c08fb7a1b
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:49 2011 +0300
usb: dwc3: core: cache GHWPARAMS* registers
cache the contents of GHWPARAMS* registers in
our device structure for easy access.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
commit 7f7f14f9e9
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:48 2011 +0300
usb: dwc3: add struct dwc3_hwparams
That structure will hold a copy of readonly
GHWPARAMS* registers for ease accessing by
the driver.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
commit 3269cbcf0b
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:47 2011 +0300
usb: dwc3: gadget: implement streams support
The following patch adds support for streams
to dwc3 driver.
While at that, also fix one small issue on
endpoint disable where we should clear all
flags not only ENABLED.
Reviewied-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Documentation/usb/dwc3.txt | 8 --------
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 34 ++++++++++++++++++++++++++++++----
3 files changed, 36 insertions(+), 12 deletions(-)
commit 39234823ff
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:46 2011 +0300
usb: dwc3: gadget: add support for Bursts
We already have the value from gadget drivers,
just need to pass it to our controller.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Integrate in this commit also the change
"USB: use usb_endpoint_maxp() instead of le16_to_cpu()" 29cc88979a8818cd8c5019426e945aed118b400e
from Linux kernel 3.1. The reason why this change was not
cherry-picked separately is because I wanted to reduce impact
on msm code tree, and only change dwc3 driver.]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 24a340bc5f
Author: kuninori.morimoto.gx@renesas.com <kuninori.morimoto.gx@renesas.com>
Date: Mon Jul 25 00:39:30 2011 -0700
usb: add usb_endpoint_maxp() macro
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: use __le16_to_cpu instead of le16_to_cpu]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
include/linux/usb/ch9.h | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
commit a8c7e2c40c
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:45 2011 +0300
usb: dwc3: gadget: fix DMA offset calculation
Fix offset calculation in dwc3_trb_dma_offset()
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit b669953027
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:44 2011 +0300
usb: dwc3: gadget: make DWC3_EP_WEDGE do the right thing
This makes DWC3_EP_WEDGE do the right thing, which is
prevent DWC3_EP_WEDGE from ever being cleared by a
ClearFeature(HALT) command.
[ balbi@ti.com : allowed set_wedge to send SetHalt command
to controller ]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
commit 0b16af6942
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:43 2011 +0300
usb: dwc3: gadget: driver should not wait for RxFIFO to drain
An older version of the databook said to wait for the FIFO to
drain, but that has been removed from the newer databooks.
Waiting for RxFIFO to drain caused problems when testing against
one of the host controllers available in the market.
After talking to one of the RTL engineers, he stated that we
should _not_ wait for RxFIFO to drain.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 19 -------------------
1 files changed, 0 insertions(+), 19 deletions(-)
commit 074a58e218
Author: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Date: Fri Sep 30 10:58:42 2011 +0300
usb: dwc3: gadget: fix DEPSTARTCFG for non-EP0 EPs
DEPSTARTCFG for non-EP0 EPs must only be sent once per config
[ balbi@ti.com : changed config_start to start_config_issued ]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/ep0.c | 1 +
drivers/usb/dwc3/gadget.c | 10 +++++++++-
3 files changed, 12 insertions(+), 1 deletions(-)
commit 6a5d97b4f6
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 30 10:58:41 2011 +0300
usb: dwc: remove "All rights reserved" statement.
Some people think that this line is not compatible with the GPL. The
statement was required due to the Buenos Aires Convention and is now
deprecated. I remove it because it is said that it is pointless nowdays.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 1 -
drivers/usb/dwc3/core.h | 1 -
drivers/usb/dwc3/debug.h | 1 -
drivers/usb/dwc3/debugfs.c | 1 -
drivers/usb/dwc3/dwc3-omap.c | 1 -
drivers/usb/dwc3/dwc3-pci.c | 1 -
drivers/usb/dwc3/ep0.c | 1 -
drivers/usb/dwc3/gadget.c | 1 -
drivers/usb/dwc3/gadget.h | 1 -
drivers/usb/dwc3/io.h | 1 -
10 files changed, 0 insertions(+), 10 deletions(-)
commit 4537314ce3
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 30 10:58:40 2011 +0300
usb: dwc3: ep0: fix debug output
Use "ep0in" and "ep0out" instead "ep1in" and "ep0out" which is confusing
and not consistent with the remaining output.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 3332e3a08f
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 30 10:58:39 2011 +0300
usb: dwc3: ep0: remove second giveback in error case
We already give requests back in dwc3_ep0_stall_and_restart() so
doing it again here will most likely corrupt the list.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
commit ab432aaf9f
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:38 2011 +0300
usb: dwc3: ep0: fix debug message
The way it was before was really meaningless.
Now it looks saner.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
commit 62f700c076
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:37 2011 +0300
usb: dwc3: ep0: ignore direction on 2-stage transfer
We don't need to care about direction on a two stage
transfer.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
commit 7492d143df
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Sep 30 10:58:36 2011 +0300
usb: dwc3: ep0: Make USB30CV happy with SetAddress
According to USB 3.0 Specification, a SetAddress()
while device is in Configured State has an unspecified
behavior (see Section 9.4.6). Still USB30CV wasn't
happy with my Stall reply.
To make that thing happy, just accept the SetAddress()
always. No problems have been observed thus far.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 31 +++++++++----------------------
1 files changed, 9 insertions(+), 22 deletions(-)
commit 72679f287e
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 21:18:47 2011 +0300
usb: dwc3: gadget: improve debug on link state change
It's useful to know which states core is going
through, as it might help us figure out misbehavior
on specific link states.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit 9aa078136c
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Sep 6 10:56:51 2011 +0300
usb: dwc3: omap: set idle and standby modes
For now, let's disable IDLE and STANDBY transitions
until we have a real HW to validate against.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
commit 0883c82126
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 18:27:33 2011 +0300
usb: dwc3: ep0: introduce ep0_expect_in flag
This flag will tell us which direction we're
expecting on the next (data or status) phase.
It will help us catching errors of host going
crazy and requesting data of the wrong direction.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/ep0.c | 16 ++++++++++++++++
2 files changed, 18 insertions(+), 0 deletions(-)
commit 685f979948
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 18:17:12 2011 +0300
usb: dwc3: ep0: giveback requests on stall_and_restart
if we don't, the list will be busy forever.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
commit 8f28d64194
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 18:16:21 2011 +0300
usb: dwc3: gadget: drop the useless dma_sync_single* calls
if req->dma isn't DMA_ADDR_INVALID it means gadget driver
mapped the request or allocated from coherent, so it's
unnecessary to do anything.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 9 ---------
1 files changed, 0 insertions(+), 9 deletions(-)
commit 5aa8e6c20c
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 17:42:11 2011 +0300
usb: dwc3: gadget: fix GCTL programming
ensure a few bits are cleared before enabling
what we need.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
commit cb4884ccc0
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 17:41:00 2011 +0300
usb: dwc3: define ScaleDown macro helper
We must ensure that those bits aren't set as
they should only be used in simulation.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit 680df4e4b4
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 8 17:39:59 2011 +0300
usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN
that should be 1 << 16, not 16. Caused so many
problems and we never caught it before.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 6c317eb0b0
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Wed Aug 31 17:12:02 2011 +0200
usb: dwc3: gadget: do not map/unmap ZLP transfers
If the gadget drivers sends a ZLP we are trying to map this this request
which does not work on all implementations. So we simply skip mapping
it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
commit 0490e89899
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Sep 6 12:00:39 2011 +0300
usb: dwc3: omap: fix IRQ handling
In order to ACK the IRQ we must write back
to the same register the bits we read.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 39 ++++++++++++---------------------------
1 files changed, 12 insertions(+), 27 deletions(-)
commit a29eace3f8
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Sep 6 10:57:41 2011 +0300
usb: dwc3: omap: change IRQ name to dwc3-omap
dwc3-wrapper can be used by any other wrapper,
using dwc3-omap makes it clear that we're running
on OMAP SoC.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit eac0a18738
Author: Felipe Balbi <balbi@ti.com>
Date: Mon Sep 5 13:37:28 2011 +0300
usb: dwc3: add module.h to dwc3-omap.c and core.c
We need that header because of THIS_MODULE.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 1 +
drivers/usb/dwc3/dwc3-omap.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
commit 3853301374
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 22:26:25 2011 +0300
usb: dwc3: omap: distinguish between SW and HW modes
The OMAP wrapper allows us to either control internal
OTG signals via SW or HW. Different boards might wish
to use one or the other mode of operation. Let's have
have that information passed via platform_data for now.
After DT conversion is finished for OMAP, we can easily
convert this to a DT attribute.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 22 ++++++++++++++
include/linux/platform_data/dwc3-omap.h | 47 +++++++++++++++++++++++++++++++
2 files changed, 69 insertions(+), 0 deletions(-)
commit a9f36f0d43
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 18:33:43 2011 +0300
usb: dwc3: omap: drop DEV_PM_OPS for now
We need to have actual HW in order to implement
and test that part of the code anyway. Until then
it's best to remove it.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 41 -----------------------------------------
1 files changed, 0 insertions(+), 41 deletions(-)
commit 25add6a527
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 18:22:01 2011 +0300
usb: dwc3: omap: use the macro we already have
trivial patch, no functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
commit 6db06e599e
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 14:52:52 2011 +0300
usb: dwc3: omap: do not enable DMA Disable Clear IRQ
Otherwise that IRQ will trigger forever. It's quite
unnecessary.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
commit e57336aec4
Author: Felipe Balbi <balbi@ti.com>
Date: Thu Sep 1 14:46:16 2011 +0300
usb: dwc3: omap: fix dev_dbg() calls
dev_dbg() macro expects a device pointer as
argument, not a memory base address.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-omap.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
commit fe44a98207
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:52:17 2011 +0300
usb: dwc3: use ep0_next_event field
Start tracking the next expected event and act
on the error conditions as suggested by databook.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 40 ++++++++++++++++++++++++++++++++++++----
1 files changed, 36 insertions(+), 4 deletions(-)
commit 660f6fbd3c
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:50:40 2011 +0300
usb: dwc3: core: add ep0_next_event field
this field will hold the next expected event.
In certain cases, host might fall into some error
condition and ask from us the wrong Control phase.
On such situations, we should stall and restart.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
commit 7971a74744
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:48:08 2011 +0300
usb: dwc3: drop EP0_STALL state
Whenever we issue a Set Stall command on EP0,
the state machine will be restarted and Stall
is cleared automatically, when core receives
the next SETUP packet.
There's no need to track that EP0_STALL state.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 1 -
drivers/usb/dwc3/ep0.c | 2 --
drivers/usb/dwc3/gadget.c | 10 ++++++++--
3 files changed, 8 insertions(+), 5 deletions(-)
commit 7467e8ba54
Author: Felipe Balbi <balbi@ti.com>
Date: Tue Aug 30 15:54:53 2011 +0300
usb: dwc3: ep0: clear all EP0 flags
when we're going to issue Set Stall command,
we should clear DWC3_EP_STALL flag, but also
we should clear BUSY, HALTED and all others.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit c201c026ca
Author: Felipe Balbi <balbi@ti.com>
Date: Wed Aug 31 11:51:43 2011 +0300
usb: dwc3: ep0: fix Get Status handling
data was prepared on setup_buf but transfer
was started on ctrl_req, fix it.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 6028defbf5
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 16:46:38 2011 +0200
usb: dwc3: gadget: replace mdelay with udelay in the busy loop
There are two spots where we wait until the HW finishes processing a
certain command. Initially we had a few problems and we used 500ms as a
limit to be on a the safe side. Paul Zimmerman mentioned this is little too
much. After a debugging session, we noticed that we hardly ever go over 20us
and didn't pass 30usec so far. Using mdelay() seems way overloaded.
Giving the current numbers 500usec as the upper limit is more than enough.
Should it ever timeout then something is definitely wrong.
While here, also replace the type with u32 since long does not really
fit here.
Cc: Paul Zimmerman <paul.zimmerman@synopsys.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 12 ++++--------
1 files changed, 4 insertions(+), 8 deletions(-)
commit d63d30a465
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 13:56:37 2011 +0200
usb: dwc3: gadget: rework the dequeue on RESET & DISCONNECT
- since a while we are disabling an endpoint and purging every requests on
RESET and DISCONNECT which leads to a warning since the endpoint was
disabled twice (once by the UDC, and second time by the gadget). I
think UDC should nuke all requests because all those requests
become invalid. It's gadget driver's responsability, though, to disable
its used endpoints. This is done by merging dwc3_stop_active_transfer()
and dwc3_gadget_nuke_reqs() into dwc3_remove_requests().
- dwc3_stop_active_transfer() is now no longer called unconditionaly.
This has the advantage that it is always called to disable an active
transfer which means if res_trans_idx 0 than something went wrong and
it is an error condition because we can't clean up the requests.
- Remove the DWC3_EP_WILL_SHUTDOWN which was introduced while
introducing the command complete part for dequeue. All requests on
req_queued list should be removed during the dwc3_cleanup_done_reqs()
callback so there is no reason to go through the list again.
We consider it an error condition if requests are still on this
list since we never queue TRB without LST=1 (the last requests has
always LST=1, there are no requests with LST=0 behind it).
[ balbi@ti.com : reworked commit log a bit, made patch apply ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 1 -
drivers/usb/dwc3/gadget.c | 31 ++++++++++++-------------------
2 files changed, 12 insertions(+), 20 deletions(-)
commit 50b47b650d
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 13:56:36 2011 +0200
usb: dwc3: core: move the core check before soft reset
We read the DWC3_GSNPSID register to make sure we got the correct
register offset passed. One of the recent commits moved the soft reset
before this so in case of the wrong offset we end up with "reset timed
out". This patch moves the "id" check before the reset again.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.c | 19 +++++++++----------
1 files changed, 9 insertions(+), 10 deletions(-)
commit 63940b6b0e
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 29 13:56:35 2011 +0200
usb: dwc3: debugfs: remove test mode interface
There are some issues around for enabling/disabling this mode and
handling it. It does not work perfectly (yet). However we have a few
gadgets tested successfuly so far. That means we are quite confident
that we won't need this in near future.
So I'm for removing it and bringing a working version back once there is
a need for it.
Thanks to Dan Carpenter who spotted the wrong memory handling here.
[ balbi@ti.com : made it actually apply ]
Cc: Dan Carpenter <error27@gmail.com>
Cc: wharms@bfs.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/debugfs.c | 94 --------------------------------------------
1 files changed, 0 insertions(+), 94 deletions(-)
commit 9e44d2fcbc
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:28:36 2011 +0300
usb: dwc3: ep0: simplify EP0 state machine
The DesignWare USB3 core tells us which phase
of a control transfer should be started, it
also tells us which physical endpoint needs
that transfer.
With these two informations, we have all we
need to simply EP0 handling quite a lot and
get rid rid of the SW state machine tracking
ep0 states.
For achieving this perfectly, we needed to
add support for situations where we get
XferNotReady while endpoint is still busy
and XferNotReady while gadget driver still
hasn't queued a request.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 12 +-
drivers/usb/dwc3/ep0.c | 363 ++++++++++++++++++++-------------------------
drivers/usb/dwc3/gadget.c | 3 +-
3 files changed, 163 insertions(+), 215 deletions(-)
commit 01eb17f36f
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:26:00 2011 +0300
usb: dwc3: core: add flag for EP0 direction
Add a flag to keep track of ep0 direction.
This flag will be used on a following patch.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
commit 7f3c16ae1c
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:18:09 2011 +0300
usb: dwc3: ep0: add handling for unaligned OUT transfers
In case we have transfers which aren't aligned
to wMaxPacketSize, we need to be careful with
how we start the transfer with the HW. OUT
transfers _must_ be aligned with wMaxPacketSize
and in order to guarantee that, we use a bounce
buffer.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 37 ++++++++++++++++++++++++++++++++-----
1 files changed, 32 insertions(+), 5 deletions(-)
commit abf905d6b7
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:07:53 2011 +0300
usb: dwc3: add a bounce buffer for control endpoints
This core cannot handle OUT transfers which aren't
aligned to wMaxPacketSize, but that can happen at
least on control endpoint with the USB Audio Class.
This patch adds a bounce buffer to be used on the
case of a non-aligned ep0out request is queued.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 6 ++++++
drivers/usb/dwc3/gadget.c | 29 ++++++++++++++++++++++-------
2 files changed, 28 insertions(+), 7 deletions(-)
commit c204098003
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 22:04:32 2011 +0300
usb: dwc3: core: add defines for XferNotReady event on Control EPs
The status field of the Transfer Not Read event
is different on Control Endpoints. On this patch
we are just adding the defines to be used on a
later patch which will re-work the control endpoint
handling.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
commit 60639e6734
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 20:29:58 2011 +0300
usb: dwc3: gadget: improve command completion debug message
the previous message had too little meaning. Make
it more human readable and use the macro we already
had for extracting the command completion status out
of DEPCMDn register.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
commit f3d228bb1c
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 15:10:09 2011 +0300
usb: dwc3: gadget: set request dma to invalid when unmapping
if we don't set DMA address to invalid when unmapping,
we might fall in a situation where request buffer
can't be mapped to DMA again.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit c388134423
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 02:30:33 2011 +0300
usb: dwc3: ep0: fix 'transfered' typo
trivial patch. No functional changes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/ep0.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
commit d2a925e9fb
Author: Felipe Balbi <balbi@ti.com>
Date: Sat Aug 27 01:40:52 2011 +0300
usb: dwc3: core: add missing @ for kerneldoc
trivial patch, no functional changes
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/core.h | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
commit b1b7b1afba
Author: Dan Carpenter <error27@gmail.com>
Date: Fri Aug 26 12:21:13 2011 +0300
usb: dwc3: debugfs: add a kfree() on error to dwc3_testmode_open()
We may as well fix this potential leak so we don't have to listen to
the static checkers complain.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/debugfs.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
commit 2bb2a4a9f9
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 22 18:29:13 2011 +0200
usb: dwc3: gaget: clear DWC3_EP_WILL_SHUTDOWN bit
Without this patch we won't clear that bit and instead will
clear all other bits on our endpoint flag.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit 043b6e0d49
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 22 17:42:19 2011 +0200
usb: dwc3: gadget: use TRB type 6 for ISOC transfers
Type 6 should be used for the first transfer during an interval. This is
also what the reference driver is using. Type 7 seems to be for following
or additional transfers within the same interval.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
commit b767680adf
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Mon Aug 22 17:42:18 2011 +0200
usb: dwc3: gadget: reset resource index to zero
If we collected two requests together (i.e. only the last of them has
LST=1) then we only have to stop transfer once: The clean-up code will
cleanup everything until first TRB with the LST bit set.
After XferComplete this index should be no longer valid since there is
no transfer pending.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
commit f5327ee678
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Aug 19 19:59:12 2011 +0200
usb: dwc3: gadget: fixing dequeue of TRBs
A TRB which is dequeued seems to have its HWO bits set to 1. Therefore
we ignore it if we dequeue it after the command is completed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
commit 502e0e5684
Author: Randy Dunlap <rdunlap@xenotime.net>
Date: Tue Aug 23 12:52:47 2011 -0700
usb: fix dwc3 build when USB_GADGET_DWC3 is not enabled
Fix build error when CONFIG_USB_GADGET_DWC3 is not enabled:
ERROR: "dwc3_send_gadget_ep_cmd" [drivers/usb/dwc3/dwc3.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/gadget.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
commit 15dc6e57e3
Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue Aug 23 15:08:54 2011 +1000
usb: include module.h in the DesignWare USB3 DRD driver
Fixes this build error:
drivers/usb/dwc3/dwc3-pci.c: In function 'dwc3_pci_init':
drivers/usb/dwc3/dwc3-pci.c:211:9: error: 'THIS_MODULE' undeclared (first use in this function)
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/dwc3/dwc3-pci.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
commit aa526a9467
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Aug 19 18:10:58 2011 +0300
usb: dwc3: Introduce DesignWare USB3 DRD Driver
The DesignWare USB3 is a highly
configurable IP Core which can be
instantiated as Dual-Role Device (DRD),
Peripheral Only and Host Only (XHCI)
configurations.
Several other parameters can be configured
like amount of FIFO space, amount of TX and
RX endpoints, amount of Host Interrupters,
etc.
The current driver has been validated with
a virtual model of version 1.73a of that core
and with an FPGA burned with version 1.83a
of the DRD core. We have support for PCIe
bus, which is used on FPGA prototyping, and
for the OMAP5, more adaptation (or glue)
layers can be easily added and the driver
is half prepared to handle any possible
configuration the HW engineer has chosen
considering we have the information on
one of the GHWPARAMS registers to do
runtime checking of certain features.
More runtime checks can, and should, be added
in order to make this driver even more flexible
with regards to number of endpoints, FIFO sizes,
transfer types, etc.
While this supports only the device side, for
now, we will add support for Host side (xHCI -
see the updated series Sebastian has sent [1])
and OTG after we have it all stabilized.
[1] http://marc.info/?l=linux-usb&m=131341992020339&w=2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: gadget_chips.h: Use 'gadget_is_dwc3(g)' only if
CONFIG_USB_GADGET_DWC3 is defined.]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Documentation/usb/dwc3.txt | 53 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 2 +
drivers/usb/dwc3/Kconfig | 25 +
drivers/usb/dwc3/Makefile | 36 +
drivers/usb/dwc3/core.c | 467 +++++++++
drivers/usb/dwc3/core.h | 709 +++++++++++++
drivers/usb/dwc3/debug.h | 51 +
drivers/usb/dwc3/debugfs.c | 534 ++++++++++
drivers/usb/dwc3/dwc3-omap.c | 410 ++++++++
drivers/usb/dwc3/dwc3-pci.c | 219 ++++
drivers/usb/dwc3/ep0.c | 782 ++++++++++++++
drivers/usb/dwc3/gadget.c | 2063 +++++++++++++++++++++++++++++++++++++
drivers/usb/dwc3/gadget.h | 292 ++++++
drivers/usb/dwc3/io.h | 55 +
drivers/usb/gadget/Kconfig | 12 +
drivers/usb/gadget/gadget_chips.h | 4 +
17 files changed, 5716 insertions(+), 0 deletions(-)
commit eaa328c0bb
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Aug 19 18:10:57 2011 +0300
usb: gadget: introduce gadget_is_dwc3()
... to check whether we're running on DesignWare
USB3 DRD Controller.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Conflicts: gadget_chips.h]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
drivers/usb/gadget/gadget_chips.h | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
Change-Id: Id7c13709d3849777a009d128d75d59bbfb7cb5e7
Signed-off-by: David Brown <davidb@codeaurora.org>
Due to changes in usb_bam driver and usage of the
standard mechanism of platform resources instead
of adding new platform data, usb_bam_phy_base and
usb_bam_phy_size fields became unnecessary and were
removed.
Change-Id: I0f3a57724ecc033e704aaca6f651561a344c9fef
Signed-off-by: Ofir Cohen <ofirc@codeaurora.org>
Use the clock APIs instead of the msm_xo APIs to vote on CXO.
This removes one more msm specific api from this driver and will
allow us to move XO control into the rpm clock driver.
Change-Id: Ie9344aad20651002e98f13cd3adb39680fbd93bd
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Unlike Tabla 1.x, Tabla 2.0 codec has different address of micbias 4
registers.
Check hardware version and access proper address when accessing
micbias 4 registers.
CRs-fixed: 330357
Change-Id: I5e12a6b15e82b00d2e238c21d795fdc189ead6a5
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Userspace will set a flag in the context if preambles are in use. If
they are, we can safely skip save and restore commands for the
context. GMEM save/restore is still required. To improve performance,
preamble commands are skipped when the context hasn't changed since
the last issueibcmds.
Change-Id: I21bb8996d62651122dbebcf7a79543679109e1f9
Signed-off-by: Vijay Krishnamoorthy <adivarah@codeaurora.org>
* changes:
gpu: ion: Add ION support for fmem
gpu: ion: Add check for cached kernel mappings
gpu: ion: Remove protection of heap on first alloc
fmem: Add reserved_size to fmem
fmem: clean up tmem metadata before leaving T-state
* changes:
msm: board-8960: Enable PMIC USB OTG switch over current protection
msm: board-8960: Support PMIC USB OTG switch over current protection
regulator: pm8xxx-regulator: Add OCP control functionality for switches
mfd: pmic: Add voltage switch test registers to PMIC core drivers
* changes:
msm: camera: Remove DIS related code from VPE driver.
msm: camera: Add MCTL camera node.
msm: camera: Configure VFE for two output mode.
msm: camera: Correct the reserve buffer logic in mctl_pp.
FMEM allows ION to release memory for other
purposes when ION clients are not using the
memory.
Add new heap type for fmem that make calls
into fmem API to transition memory from T to
C state and vice versa. Add support for
fmem to content protection heap.
Change-Id: I95f949b57c99949e6eafe6a6f5fd147bdaa264f6
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
udc_start() should only trigger the internal state machine and make
minimal house keeping. Before that call udc-core calls the bind()
callback and after the callback the pullup().
udc_stop() is simillar, udc-core calls pullup(), unbind() and finally
udc_stop().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
SuperSpeed USB has defined a new descriptor, called
the Binary Device Object Store (BOS) Descriptor. It
has also changed a bit the definition of SET_FEATURE
and GET_STATUS requests to add USB3-specific details.
This patch implements both changes to the Composite
Gadget Framework.
[ balbi@ti.com : slight changes to commit log
fixed a compile error on ARM ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
This field is used by the Gadget drivers to specify
the maximum speed they support, meaning: the maximum
speed they can provide descriptors for.
The driver speed will be set in consideration of this
value.
[ balbi@ti.com : dropped the ifdeffery ]
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
This patch defines necessary fields to support
streaming for USB3.0.
It implements a new function, called
usb_ep_autoconfig_ss(), to be used instead of the
existing usb_ep_autoconfig() when working in
SuperSpeed mode and there is a need to search for
an endpoint according to the number of required
streams.
[ balbi@ti.com : slight changes to commit log ]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Remove obsolete functions:
1. ep_choose()
2. usb_find_endpoint()
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Changed also the following files to
comply with this commit: f_accessory.c,f_adb.c,f_diag.c,f_mtp.c,
f_rmnet.c,f_rmnet_sdio,f_rmnet_smd,f_rmnet_smd_sdio,f_serial.f_ccid.c.
Also merged a patch in f_serial.c for correct checking of the return value
of config_ep_by_speed. See "usb: gadget: fix g_serial regression".
Also fix a bug in ci13xxx_udc. Since f_serial is now checking if the endpoint
descriptors are null in the set_alt function, need to set them to null on
ep_disable in case of cable disconnect. Since the ep descriptor was inserted
to struct usb_ep in "usb: gadget: add usb_endpoint_descriptor to struct usb_ep"
then simply convert the ci13xxx_udc to work with mEp->ep.desc instead of
mEp->desc, this will ensure that the correct descriptor will be cleared
on endpoint disable.
I will upstream it to Linux community soon, I will name it:
"usb: gadget: use usb ep descriptor of struct usb_ep instead of wrapper desc"]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Add config_ep_by_speed() to configure the endpoint
according to the gadget speed.
Using this function will spare the FDs from handling
the endpoint chosen descriptor.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Change usb_ep_enable() prototype to use endpoint
descriptor from usb_ep.
This optimization spares the FDs from saving the
endpoint chosen descriptor. This optimization is
not full though. To fully exploit this change, one
needs to update all the UDCs as well since in the
current implementation each of them saves the
endpoint descriptor in it's internal (and extended)
endpoint structure.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[idos@codeaurora.org: Added more changes for the following files
since API break with msm code tree: ci13xxx_udc.c,f_accessory,f_adb,
f_diag,f_mtp,f_rmnet,f_rmnet_sdio,f_rmnet_smd, f_rmnet_smd_sdio,u_bam.c,
u_sdio.c,u_rmnet.h,u_sdio.c,u_smd.c,f_ccid.c,u_data_hsic.c]
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
this class will be used to abstract away several of the duplicated
operations scattered among the USB gadget controller drivers.
Later, we can add an atomic notifier to tell interested drivers about
what's happening with the controller. Notifications such as suspend,
resume, enumerated, etc. will be useful, at a minimum, for implementing
usb charger detection.
As part of the converting process usb_gadget_probe_driver() is no longer
part of each udc but pushed into the ->stap() callback. The same for his
couterpart.
The core is currently set explicit to 'n'. It will be changed to 'y' once
all users are converted since it provides functions which clash with
other drivers.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Add the ability to selectively enable over current protection
(OCP) for LVS and MVS type PMIC voltage switches. OCP is used to
automatically disable the output of a PMIC switch in hardware when
the load on the switch becomes too large.
The sequence used when enabling a switch when OCP is desired is as
follows:
1. Disable OCP.
2. Enable the switch.
3. Wait for ocp_enable_time microseconds.
4. Enable OCP.
This sequence is used to ensure that sufficient time is allowed
for inrush current to subside so that a false OCP event is not
triggered. The delay time is board specific.
Change-Id: I0ea73d3bddd3280ff25f232ece0f1175a52d36cc
Signed-off-by: David Collins <collinsd@codeaurora.org>
Specify the SSBI test register address for each of the voltage
switches in PMIC 8018, 8038, and 8921 core drivers. This will
allow for future handling of over current protection (OCP) in
the pm8xxx-regulator driver.
Also define the OCP IRQs associated with each of the switches
on these PMICs.
Change-Id: Icfc51c01680e6e95b4348051c764f16cb91b4916
Signed-off-by: David Collins <collinsd@codeaurora.org>
Due to a limitation in how the video hardware is able
to access memory, fmem needs to be able to allocate a
physically contiguous block of memory that can be split into
two pieces. One piece will be managed by fmem
while the other piece (reserved) will not be handled by fmem.
The hardware limitation requires the reserved part to be at
a lower address than the other piece managed by fmem.
Add a new parameter to fmem that allows platform
data to specify the size of the piece that should not
be managed by fmem.
Change-Id: I910680ca72233de9cef91ac3262a078a36f1b1fd
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
VPE driver should be abstracted from DIS related
code since the configuration is done in the userspace
library. So remove the code from VPE driver.
Change-Id: Ic320ab903cff502f2a21e1ae66ecc06581e56aa3
Signed-off-by: Ujwal Patel <ujwalp@codeaurora.org>
Signed-off-by: Kiran Kumar H N <hurlisal@codeaurora.org>
Add support for MCTL camera node. This
is a v4l2 device node which will be used
by the camera daemon process to configure
buffers for VFE.
Change-Id: I8415288fb6881376a8c1e78ca03bb12f8f655863
Signed-off-by: Kiran Kumar H N <hurlisal@codeaurora.org>
Signed-off-by: Ujwal Patel <ujwalp@codeaurora.org>
Configure upto two outputs of VFE desginated
as primary and secondary. Depending on the irq,
only send message type primary and secondary and
allow MCTL to interpret these messages.
Change-Id: I25568cb6bba5792658b0570383f64ddb58e21421
Signed-off-by: Kiran Kumar H N <hurlisal@codeaurora.org>
Signed-off-by: Ujwal Patel <ujwalp@codeaurora.org>
v4l2_qcom_frameskip is a QCOM specific parameter to be used with
VIDIO_S_PARM to indicate that the driver might take up to
maxframeinterval nanoseconds in providing the next buffer.
Driver supports this parameter if the V4L2_CAP_QCOM_FRAMESKIP capability
is set in VIDIO_G_PARM.
Change-Id: Iebbd012b9cc75395b1e165349e7e2d9d7a77160a
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Add fourcc definitions and documentation for the following
compressed formats: H264, H264 without start codes,
MPEG1/2/4 ES, XVID, VC1 Annex G and Annex L compliant.
Change-Id: Ibd87db4f72793310871ebd7a178e9593c4b54d33
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
When the daemon asks to reserve a free buffer, get the
correct address by using the image mode to get to the
correct camera instance and populating the buffer address.
Change-Id: I23c6e00458562ef2b9880cbffe2d6a100de80ea1
Signed-off-by: Kevin Chan <ktchan@codeaurora.org>
Signed-off-by: Kiran Kumar H N <hurlisal@codeaurora.org>
Signed-off-by: Ujwal Patel <ujwalp@codeaurora.org>
Since the driver is a generic gpio based IR Receiver driver,
name of the driver has been changed from tsop-ir to gpio-ir-recv.
Variables of the driver change accordingly.
Change-Id: I2e41c320b3f2f1a9796fc404791024c112a498c1
Signed-off-by: Ankush Khandelwal <akhand@codeaurora.org>
The atmel_mxt_ts driver manipulates the touch coordinates
if they are < 1024. In cases when the display < 1024 and
virtual key area > 1024, there is a problem in reporting
the coordinates for the virtual key area. Add new pdata
variables which can handle this.
Change-Id: Ic31db032a1598c60c01bff31c7b36042f42c9817
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
The OMAP wrapper allows us to either control internal
OTG signals via SW or HW. Different boards might wish
to use one or the other mode of operation. Let's have
have that information passed via platform_data for now.
After DT conversion is finished for OMAP, we can easily
convert this to a DT attribute.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
PC tools like QPST/QXDM need a distinct ID for each new target type.
DIAG driver provides this ID and hence adding this support.
Change-Id: I270706440ffdfeb1244a9c96484f26c386cc9cbd
Signed-off-by: Shalabh Jain <shalabhj@codeaurora.org>
PM8921 family provides a pullup enable bit to support USB ID.
Add the API for such support.
Change-Id: Id3056af070080c1c12f27720020ae718fc6f34f6
Signed-off-by: Willie Ruan <wruan@codeaurora.org>
Add pre-divide=6 and update the max period based on new pre-divide.
Also update pre-divide related macros for better readability.
Change-Id: I5298c373c78f8723dab9a735e4d94f89798800d5
Signed-off-by: Willie Ruan <wruan@codeaurora.org>
Manu Gautam
Linux Build Service Account
Michael Bohan
Jeff Johnson
David Brown
Ofir Cohen
Stephen Boyd
Joonwoo Park
Vijay Krishnamoorthy
Laura Abbott
Felipe Balbi
Sebastian Andrzej Siewior
Tatyana Brokhman
kuninori.morimoto.gx@renesas.com
David Collins
Larry Bassel
Kiran Kumar H N
Deva Ramasubramanian
Kamil Debski
Kevin Chan
Ankush Khandelwal
Amy Maloche
Shalabh Jain
Willie Ruan