Merge Upstream's stable 3.0.21 branch into msm-3.0
This consists 814 commits and some merge conflicts.
The merge conflicts are because of some local changes to
msm-3.0 as well as some conflicts between google's tree and
the upstream tree.
Conflicts:
arch/arm/kernel/head.S
drivers/bluetooth/ath3k.c
drivers/bluetooth/btusb.c
drivers/mmc/core/core.c
drivers/tty/serial/serial_core.c
drivers/usb/host/ehci-hub.c
drivers/usb/serial/qcserial.c
fs/namespace.c
fs/proc/base.c
Change-Id: I62e2edbe213f84915e27f8cd6e4f6ce23db22a21
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Sysfs_notify takes a mutex and therefore cannot be called from atomic
context like interrupt handler in this case. Use a workqueue to schedule
the work instead.
Change-Id: I0a5230fe379aa51f1065df4af9b27f471aa22440
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Wakeup the userspace poll on change of display status. The
userspace then may take action to change the
power/performance characteristics of the device.
Change-Id: I9bd11f3d895d3d83230104f5d8dcd1deeaa754cd
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Provide userspace with a pollable sysfs entry that it can poll
on waiting for touch event notifiction. Once it
is woken up, the userspace can take action to change the
power/performance characteristics of the device for the duration
of the event.
Change-Id: Iab84f729f2ea3a5352c4e5173f78544023a276c1
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
During some CPU power modes entered during idle, hotplug and
suspend, peripherals located in the CPU power domain, such as
the GIC, localtimers, and VFP, may be powered down. Add a
notifier chain that allows drivers for those peripherals to
be notified before and after they may be reset.
Signed-off-by: Colin Cross <ccross <at> android.com>
[santosh.shilimkar <at> ti.com: Rebased against 3.1-rc3]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar <at> ti.com>
Tested-by: Kevin Hilman <khilman <at> ti.com>
Change-Id: I6e076344b268869d12033f57321f3e7cf23b05e8
Signed-off-by: Ashwin Chaugule <ashwinc@codeaurora.org>
This reverts commit 7ef4dbaa2a.
Revert "power: wakelock: BUG if wakelock is taken very late"
This reverts commit 57b34bbdca.
Change-Id: Ie1288b5e6c899ac4419c55b91cb024b8093b5ffe
Signed-off-by: Patrick Cain <pcain@codeaurora.org>
* common/android-3.0: (570 commits)
misc: remove kernel debugger core
ARM: common: fiq_debugger: dump sysrq directly to console if enabled
ARM: common: fiq_debugger: add irq context debug functions
net: wireless: bcmdhd: Call init_ioctl() only if was started properly for WEXT
net: wireless: bcmdhd: Call init_ioctl() only if was started properly
net: wireless: bcmdhd: Fix possible memory leak in escan/iscan
cpufreq: interactive governor: default 20ms timer
cpufreq: interactive governor: go to intermediate hi speed before max
cpufreq: interactive governor: scale to max only if at min speed
cpufreq: interactive governor: apply intermediate load on current speed
ARM: idle: update idle ticks before call idle end notifier
input: gpio_input: don't print debounce message unless flag is set
net: wireless: bcm4329: Skip dhd_bus_stop() if bus is already down
net: wireless: bcmdhd: Skip dhd_bus_stop() if bus is already down
net: wireless: bcmdhd: Improve suspend/resume processing
net: wireless: bcmdhd: Check if FW is Ok for internal FW call
tcp: Don't nuke connections for the wrong protocol
ARM: common: fiq_debugger: make uart irq be no_suspend
net: wireless: Skip connect warning for CONFIG_CFG80211_ALLOW_RECONNECT
mm: avoid livelock on !__GFP_FS allocations
...
Conflicts:
arch/arm/mm/cache-l2x0.c
arch/arm/vfp/vfpmodule.c
drivers/mmc/core/host.c
kernel/power/wakelock.c
net/bluetooth/hci_event.c
Signed-off-by: Bryan Huntsman <bryanh@codeaurora.org>
commit 528f7ce6e439edeac38f6b3f8561f1be129b5e91 upstream.
In enter_state() we use "state" as an offset for the pm_states[]
array. The pm_states[] array only has PM_SUSPEND_MAX elements so
this test is off by one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts commit 7ef4dbaa2a.
Revert "power: wakelock: BUG if wakelock is taken very late"
This reverts commit 57b34bbdca.
Change-Id: Id4e05b191cf7781b8e0d0bed42f1c136b1ac428e
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Currently we reset msm_suspend_check_done in resume_noirq and set it
in the suspend_noirq stage right after the wakelock checks are done.
An issue is discovered recently that a wakelock can be held much earlier
in the resume sequence - a tasklet was scheduled right in the arch specifc
resume path, and this tasklet was run as soon as local interrupt was
enabled (the I bit in the CPSR for arm processors). The tasklet endedup
grabbing a wakelock thus causing a BUG.
To avoid this situation reset msm_suspend_check_done before enabling local
interrupts using the syscore ops.
Change-Id: I12766cb759134185e9727829f71893934492cc5f
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
If there is a wakelock held the wakelock driver rejects the suspend
by returning EAGAIN(-11). In this case since the suspend is rejected
in suspend_noirq callback, the resume_noirq callback is not called on
the wakelock driver, leading to the check_done flag not being cleared
and causing a BUG for the next wakelock request.
Don't set the check_done flag if suspend_noirq aborts suspend.
Change-Id: Iddd12cefd9a30020784416b4e5bec7fe3f7fc0e6
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
There has been handful of corner cases where a driver would call
wake_lock very late in the suspend sequence but the suspend proceeds
anyways and causes issues.
Add code to BUG if a driver grabs a wakelock after suspend_noirq callbacks
are called, this will aid in correct wakelock usage for new drivers and
give us callstacks for misbehaving drivers.
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Since the workqueue code deletes the work before executing it,
checking for no work item being currently queued to the workqueue
is not sufficient to guarantee that all the works have finished
execution.
Use a counter to guarantee that all the pending suspend_sys_sync()
works have finished execution before returning from
suspend_sys_sync_wait().
CRs-Fixed: 293595
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Conflicts:
kernel/power/wakelock.c
Use DEBUG_WAKEUP flag to show wakelocks that abort suspend, in
addition to showing wakelocks held during system resume.
DEBUG_WAKEUP is enabled by default.
Change-Id: If6fa68e8afbc482a5300ffab2964694b02b34f41
Signed-off-by: Todd Poynor <toddpoynor@google.com>
If the wakelock driver aborts suspend due to an already-held
wakelock, don't report the next wakelock held as the "wake up
wakelock".
Change-Id: I582ffbb87a3c361739a77d839a0c62921cff11a6
Signed-off-by: Todd Poynor <toddpoynor@google.com>
when enabled, prints out the function of each handler as they are called
Change-Id: I5ed251867e0e3aa3cd05f030ff3579808cedd0c2
Signed-off-by: Erik Gilling <konkers@android.com>
Prints the time spent in suspend in the kernel log, and
keeps statistics on the time spent in suspend in
/sys/kernel/debug/suspend_time
Change-Id: Ia6b9ebe4baa0f7f5cd211c6a4f7e813aefd3fa1d
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
There is a bug in free_unnecessary_pages() that causes it to
attempt to free too many pages in some cases, which triggers the
BUG_ON() in memory_bm_clear_bit() for copy_bm. Namely, if
count_data_pages() is initially greater than alloc_normal, we get
to_free_normal equal to 0 and "save" greater from 0. In that case,
if the sum of "save" and count_highmem_pages() is greater than
alloc_highmem, we subtract a positive number from to_free_normal.
Hence, since to_free_normal was 0 before the subtraction and is
an unsigned int, the result is converted to a huge positive number
that is used as the number of pages to free.
Fix this bug by checking if to_free_normal is actually greater
than or equal to the number we're going to subtract from it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
When opening /dev/snapshot device, snapshot_open() creates memory
bitmaps which are freed in snapshot_release(). But if any of the
callbacks called by pm_notifier_call_chain() returns NOTIFY_BAD, open()
fails, snapshot_release() is never called and bitmaps are not freed.
Next attempt to open /dev/snapshot then triggers BUG_ON() check in
create_basic_memory_bitmaps(). This happens e.g. when vmwatchdog module
is active on s390x.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
When DEBUG_SUSPEND is enabled print active wakelocks when we check
if there are any active wakelocks.
In print_active_locks(), print expired wakelocks if DEBUG_EXPIRE is enabled
Change-Id: Ib1cb795555e71ff23143a2bac7c8a58cbce16547
Signed-off-by: Mike Chan <mike@android.com>
Rather than signaling a full update of the display from userspace via a
console switch, this patch introduces 2 files int /sys/power,
wait_for_fb_sleep and wait_for_fb_wake. Reading these files will block
until the requested state has been entered. When a read from
wait_for_fb_sleep returns userspace should stop drawing. When
wait_for_fb_wake returns, it should do a full update. If either are called
when the fb driver is already in the requested state, they will return
immediately.
Signed-off-by: Rebecca Schultz <rschultz@google.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
This adds /sys/power/wake_lock and /sys/power/wake_unlock.
Writing a string to wake_lock creates a wake lock the
first time is sees a string and locks it. Optionally, the
string can be followed by a timeout.
To unlock the wake lock, write the same string to wake_unlock.
Change-Id: I66c6e3fe6487d17f9c2fafde1174042e57d15cd7
If EARLYSUSPEND is enabled then writes to /sys/power/state no longer
blocks, and the kernel will try to enter the requested state every
time no wakelocks are held. Write "on" to resume normal operation.
PM: wakelock: Replace expire work with a timer
The expire work function did not work in the normal case.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Some of the kerneldoc comments in kernel/power/hibernate.c are
outdated and some of them don't adhere to the kernel's standards.
Update them and make them look in a consistent way.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
All architectures supporting hibernation define
arch_prepare_suspend() as an empty function, so remove it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Some comments in the core hibernate code are outdated, some aren't
necessary any more and at least one of them is plain wrong. Remove
those comments or update them.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If device drivers allocate substantial amounts of memory (above 1 MB)
in their hibernate .freeze() callbacks (or in their legacy suspend
callbcks during hibernation), the subsequent creation of hibernate
image may fail due to the lack of memory. This is the case, because
the drivers' .freeze() callbacks are executed after the hibernate
memory preallocation has been carried out and the preallocated amount
of memory may be too small to cover the new driver allocations.
Unfortunately, the drivers' .prepare() callbacks also are executed
after the hibernate memory preallocation has completed, so they are
not suitable for allocating additional memory either. Thus the only
way a driver can safely allocate memory during hibernation is to use
a hibernate/suspend notifier. However, the notifiers are called
before the freezing of user space and the drivers wanting to use them
for allocating additional memory may not know how much memory needs
to be allocated at that point.
To let device drivers overcome this difficulty rework the hibernation
sequence so that the memory preallocation is carried out after the
drivers' .prepare() callbacks have been executed, so that the
.prepare() callbacks can be used for allocating additional memory
to be used by the drivers' .freeze() callbacks. Update documentation
to match the new behavior of the code.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Now that we have CONFIG_DYNAMIC_DEBUG there is no need for yet
another flag causing dev_dbg() and pr_debug() statements in the
core PM code to produce output. Moreover, CONFIG_PM_VERBOSE
causes so much output to be generated that it's not really useful
and almost no one sets it.
References: https://bugzilla.kernel.org/show_bug.cgi?id=23182
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* power-domains:
PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
OMAP1 / PM: Use generic clock manipulation routines for runtime PM
PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)
PM / Runtime: Add subsystem data field to struct dev_pm_info
OMAP2+ / PM: move runtime PM implementation to use device power domains
PM / Platform: Use generic runtime PM callbacks directly
shmobile: Use power domains for platform runtime PM
PM: Export platform bus type's default PM callbacks
PM: Make power domain callbacks take precedence over subsystem ones
* syscore:
PM: Remove sysdev suspend, resume and shutdown operations
PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM
ARM / Samsung: Use struct syscore_ops for "core" power management
ARM / PXA: Use struct syscore_ops for "core" power management
ARM / SA1100: Use struct syscore_ops for "core" power management
ARM / Integrator: Use struct syscore_ops for core PM
ARM / OMAP: Use struct syscore_ops for "core" power management
ARM: Use struct syscore_ops instead of sysdevs for PM in common code
This reverts commit bea3864fb6
(PM / Hibernate: Reduce autotuned default image size), because users
are now able to resolve the issue this commit was supposed to address
in a different way (i.e. by using the new /sys/power/reserved_size
interface).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
