cc0f534dc1
L23 supplies the power for the PLLs that the modem uses during boot. Proxy vote for the regulator until the modem is up enough to put in its own vote. Otherwise we may turn off L23 while the modem is just booting and kill the processor. Move to using workqueues instead of timers due to regulator APIs. Change-Id: I54c9fa025c094d4e12dbbd3212cefebe5744f8f7 Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
459 lines
16 KiB
C
459 lines
16 KiB
C
/*
|
|
* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/regulator/pm8xxx-regulator.h>
|
|
|
|
#include "board-8930.h"
|
|
|
|
#define VREG_CONSUMERS(_id) \
|
|
static struct regulator_consumer_supply vreg_consumers_##_id[]
|
|
|
|
/*
|
|
* Consumer specific regulator names:
|
|
* regulator name consumer dev_name
|
|
*/
|
|
VREG_CONSUMERS(L1) = {
|
|
REGULATOR_SUPPLY("8038_l1", NULL),
|
|
REGULATOR_SUPPLY("iris_vddrfa", "wcnss_wlan.0"),
|
|
};
|
|
VREG_CONSUMERS(L2) = {
|
|
REGULATOR_SUPPLY("8038_l2", NULL),
|
|
REGULATOR_SUPPLY("iris_vdddig", "wcnss_wlan.0"),
|
|
REGULATOR_SUPPLY("dsi_vdda", "mipi_dsi.1"),
|
|
};
|
|
VREG_CONSUMERS(L3) = {
|
|
REGULATOR_SUPPLY("8038_l3", NULL),
|
|
REGULATOR_SUPPLY("HSUSB_3p3", "msm_otg"),
|
|
};
|
|
VREG_CONSUMERS(L4) = {
|
|
REGULATOR_SUPPLY("8038_l4", NULL),
|
|
REGULATOR_SUPPLY("HSUSB_1p8", "msm_otg"),
|
|
REGULATOR_SUPPLY("iris_vddxo", "wcnss_wlan.0"),
|
|
};
|
|
VREG_CONSUMERS(L5) = {
|
|
REGULATOR_SUPPLY("8038_l5", NULL),
|
|
REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.1"),
|
|
};
|
|
VREG_CONSUMERS(L6) = {
|
|
REGULATOR_SUPPLY("8038_l6", NULL),
|
|
REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.3"),
|
|
};
|
|
VREG_CONSUMERS(L7) = {
|
|
REGULATOR_SUPPLY("8038_l7", NULL),
|
|
};
|
|
VREG_CONSUMERS(L8) = {
|
|
REGULATOR_SUPPLY("8038_l8", NULL),
|
|
REGULATOR_SUPPLY("dsi_vdc", "mipi_dsi.1"),
|
|
};
|
|
VREG_CONSUMERS(L9) = {
|
|
REGULATOR_SUPPLY("8038_l9", NULL),
|
|
REGULATOR_SUPPLY("vdd_ana", "3-004a"),
|
|
REGULATOR_SUPPLY("vdd", "3-0024"),
|
|
};
|
|
VREG_CONSUMERS(L10) = {
|
|
REGULATOR_SUPPLY("8038_l10", NULL),
|
|
REGULATOR_SUPPLY("iris_vddpa", "wcnss_wlan.0"),
|
|
};
|
|
VREG_CONSUMERS(L11) = {
|
|
REGULATOR_SUPPLY("8038_l11", NULL),
|
|
REGULATOR_SUPPLY("vdd_dig", "3-004a"),
|
|
REGULATOR_SUPPLY("iris_vddio", "wcnss_wlan.0"),
|
|
REGULATOR_SUPPLY("riva_vddpx", "wcnss_wlan.0"),
|
|
REGULATOR_SUPPLY("sdc_vccq", "msm_sdcc.1"),
|
|
};
|
|
VREG_CONSUMERS(L12) = {
|
|
REGULATOR_SUPPLY("8038_l12", NULL),
|
|
};
|
|
VREG_CONSUMERS(L14) = {
|
|
REGULATOR_SUPPLY("8038_l14", NULL),
|
|
REGULATOR_SUPPLY("pa_therm", "pm8xxx-adc"),
|
|
};
|
|
VREG_CONSUMERS(L15) = {
|
|
REGULATOR_SUPPLY("8038_l15", NULL),
|
|
};
|
|
VREG_CONSUMERS(L16) = {
|
|
REGULATOR_SUPPLY("8038_l16", NULL),
|
|
REGULATOR_SUPPLY("core_vdd", "pil_qdsp6v4.2"),
|
|
};
|
|
VREG_CONSUMERS(L17) = {
|
|
REGULATOR_SUPPLY("8038_l17", NULL),
|
|
};
|
|
VREG_CONSUMERS(L18) = {
|
|
REGULATOR_SUPPLY("8038_l18", NULL),
|
|
};
|
|
VREG_CONSUMERS(L19) = {
|
|
REGULATOR_SUPPLY("8038_l19", NULL),
|
|
REGULATOR_SUPPLY("core_vdd", "pil_qdsp6v4.1"),
|
|
};
|
|
VREG_CONSUMERS(L20) = {
|
|
REGULATOR_SUPPLY("8038_l20", NULL),
|
|
};
|
|
VREG_CONSUMERS(L21) = {
|
|
REGULATOR_SUPPLY("8038_l21", NULL),
|
|
};
|
|
VREG_CONSUMERS(L22) = {
|
|
REGULATOR_SUPPLY("8038_l22", NULL),
|
|
REGULATOR_SUPPLY("sdc_vddp", "msm_sdcc.3"),
|
|
};
|
|
VREG_CONSUMERS(L23) = {
|
|
REGULATOR_SUPPLY("8038_l23", NULL),
|
|
REGULATOR_SUPPLY("dsi_vddio", "mipi_dsi.1"),
|
|
REGULATOR_SUPPLY("hdmi_avdd", "hdmi_msm.0"),
|
|
REGULATOR_SUPPLY("hdmi_vcc", "hdmi_msm.0"),
|
|
REGULATOR_SUPPLY("pll_vdd", "pil_riva"),
|
|
REGULATOR_SUPPLY("pll_vdd", "pil_qdsp6v4.1"),
|
|
REGULATOR_SUPPLY("pll_vdd", "pil_qdsp6v4.2"),
|
|
};
|
|
VREG_CONSUMERS(L24) = {
|
|
REGULATOR_SUPPLY("8038_l24", NULL),
|
|
REGULATOR_SUPPLY("riva_vddmx", "wcnss_wlan.0"),
|
|
};
|
|
VREG_CONSUMERS(L26) = {
|
|
REGULATOR_SUPPLY("8038_l26", NULL),
|
|
};
|
|
VREG_CONSUMERS(L27) = {
|
|
REGULATOR_SUPPLY("8038_l27", NULL),
|
|
REGULATOR_SUPPLY("core_vdd", "pil_qdsp6v4.0"),
|
|
};
|
|
VREG_CONSUMERS(S1) = {
|
|
REGULATOR_SUPPLY("8038_s1", NULL),
|
|
REGULATOR_SUPPLY("HSUSB_VDDCX", "msm_otg"),
|
|
REGULATOR_SUPPLY("riva_vddcx", "wcnss_wlan.0"),
|
|
};
|
|
VREG_CONSUMERS(S2) = {
|
|
REGULATOR_SUPPLY("8038_s2", NULL),
|
|
};
|
|
VREG_CONSUMERS(S3) = {
|
|
REGULATOR_SUPPLY("8038_s3", NULL),
|
|
};
|
|
VREG_CONSUMERS(S4) = {
|
|
REGULATOR_SUPPLY("8038_s4", NULL),
|
|
};
|
|
VREG_CONSUMERS(S5) = {
|
|
REGULATOR_SUPPLY("8038_s5", NULL),
|
|
REGULATOR_SUPPLY("krait0", NULL),
|
|
};
|
|
VREG_CONSUMERS(S6) = {
|
|
REGULATOR_SUPPLY("8038_s6", NULL),
|
|
REGULATOR_SUPPLY("krait1", NULL),
|
|
};
|
|
VREG_CONSUMERS(LVS1) = {
|
|
REGULATOR_SUPPLY("8038_lvs1", NULL),
|
|
};
|
|
VREG_CONSUMERS(LVS2) = {
|
|
REGULATOR_SUPPLY("8038_lvs2", NULL),
|
|
REGULATOR_SUPPLY("vcc_i2c", "3-004a"),
|
|
REGULATOR_SUPPLY("vcc_i2c", "3-0024"),
|
|
REGULATOR_SUPPLY("vddp", "12-0048"),
|
|
};
|
|
VREG_CONSUMERS(EXT_5V) = {
|
|
REGULATOR_SUPPLY("ext_5v", NULL),
|
|
REGULATOR_SUPPLY("hdmi_mvs", "hdmi_msm.0"),
|
|
};
|
|
VREG_CONSUMERS(EXT_OTG_SW) = {
|
|
REGULATOR_SUPPLY("ext_otg_sw", NULL),
|
|
REGULATOR_SUPPLY("vbus_otg", "msm_otg"),
|
|
};
|
|
|
|
#define PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, _modes, _ops, \
|
|
_apply_uV, _pull_down, _always_on, _supply_regulator, \
|
|
_system_uA, _enable_time, _reg_id) \
|
|
{ \
|
|
.init_data = { \
|
|
.constraints = { \
|
|
.valid_modes_mask = _modes, \
|
|
.valid_ops_mask = _ops, \
|
|
.min_uV = _min_uV, \
|
|
.max_uV = _max_uV, \
|
|
.input_uV = _max_uV, \
|
|
.apply_uV = _apply_uV, \
|
|
.always_on = _always_on, \
|
|
.name = _name, \
|
|
}, \
|
|
.num_consumer_supplies = \
|
|
ARRAY_SIZE(vreg_consumers_##_id), \
|
|
.consumer_supplies = vreg_consumers_##_id, \
|
|
.supply_regulator = _supply_regulator, \
|
|
}, \
|
|
.id = _reg_id, \
|
|
.pull_down_enable = _pull_down, \
|
|
.system_uA = _system_uA, \
|
|
.enable_time = _enable_time, \
|
|
}
|
|
|
|
#define PM8XXX_LDO(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
|
|
_enable_time, _supply_regulator, _system_uA, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
|
|
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
|
|
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
|
|
REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
|
|
_supply_regulator, _system_uA, _enable_time, _reg_id)
|
|
|
|
#define PM8XXX_NLDO1200(_id, _name, _always_on, _pull_down, _min_uV, \
|
|
_max_uV, _enable_time, _supply_regulator, _system_uA, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
|
|
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
|
|
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
|
|
REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
|
|
_supply_regulator, _system_uA, _enable_time, _reg_id)
|
|
|
|
#define PM8XXX_SMPS(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
|
|
_enable_time, _supply_regulator, _system_uA, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
|
|
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
|
|
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
|
|
REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
|
|
_supply_regulator, _system_uA, _enable_time, _reg_id)
|
|
|
|
#define PM8XXX_FTSMPS(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
|
|
_enable_time, _supply_regulator, _system_uA, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL, \
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS \
|
|
| REGULATOR_CHANGE_MODE, 0, _pull_down, _always_on, \
|
|
_supply_regulator, _system_uA, _enable_time, _reg_id)
|
|
|
|
#define PM8XXX_VS(_id, _name, _always_on, _pull_down, _enable_time, \
|
|
_supply_regulator, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, \
|
|
_pull_down, _always_on, _supply_regulator, 0, _enable_time, \
|
|
_reg_id)
|
|
|
|
#define PM8XXX_VS300(_id, _name, _always_on, _pull_down, _enable_time, \
|
|
_supply_regulator, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, \
|
|
_pull_down, _always_on, _supply_regulator, 0, _enable_time, \
|
|
_reg_id)
|
|
|
|
#define PM8XXX_NCP(_id, _name, _always_on, _min_uV, _max_uV, _enable_time, \
|
|
_supply_regulator, _reg_id) \
|
|
PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, 0, \
|
|
REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, 0, 0, \
|
|
_always_on, _supply_regulator, 0, _enable_time, _reg_id)
|
|
|
|
/* Pin control initialization */
|
|
#define PM8XXX_PC(_id, _name, _always_on, _pin_fn, _pin_ctrl, \
|
|
_supply_regulator, _reg_id) \
|
|
{ \
|
|
.init_data = { \
|
|
.constraints = { \
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
|
.always_on = _always_on, \
|
|
.name = _name, \
|
|
}, \
|
|
.num_consumer_supplies = \
|
|
ARRAY_SIZE(vreg_consumers_##_id##_PC), \
|
|
.consumer_supplies = vreg_consumers_##_id##_PC, \
|
|
.supply_regulator = _supply_regulator, \
|
|
}, \
|
|
.id = _reg_id, \
|
|
.pin_fn = PM8XXX_VREG_PIN_FN_##_pin_fn, \
|
|
.pin_ctrl = _pin_ctrl, \
|
|
}
|
|
|
|
#define RPM_INIT(_id, _min_uV, _max_uV, _modes, _ops, _apply_uV, _default_uV, \
|
|
_peak_uA, _avg_uA, _pull_down, _pin_ctrl, _freq, _pin_fn, \
|
|
_force_mode, _power_mode, _state, _sleep_selectable, \
|
|
_always_on, _supply_regulator, _system_uA) \
|
|
{ \
|
|
.init_data = { \
|
|
.constraints = { \
|
|
.valid_modes_mask = _modes, \
|
|
.valid_ops_mask = _ops, \
|
|
.min_uV = _min_uV, \
|
|
.max_uV = _max_uV, \
|
|
.input_uV = _min_uV, \
|
|
.apply_uV = _apply_uV, \
|
|
.always_on = _always_on, \
|
|
}, \
|
|
.num_consumer_supplies = \
|
|
ARRAY_SIZE(vreg_consumers_##_id), \
|
|
.consumer_supplies = vreg_consumers_##_id, \
|
|
.supply_regulator = _supply_regulator, \
|
|
}, \
|
|
.id = RPM_VREG_ID_PM8038_##_id, \
|
|
.default_uV = _default_uV, \
|
|
.peak_uA = _peak_uA, \
|
|
.avg_uA = _avg_uA, \
|
|
.pull_down_enable = _pull_down, \
|
|
.pin_ctrl = _pin_ctrl, \
|
|
.freq = RPM_VREG_FREQ_##_freq, \
|
|
.pin_fn = _pin_fn, \
|
|
.force_mode = _force_mode, \
|
|
.power_mode = _power_mode, \
|
|
.state = _state, \
|
|
.sleep_selectable = _sleep_selectable, \
|
|
.system_uA = _system_uA, \
|
|
}
|
|
|
|
#define RPM_LDO(_id, _always_on, _pd, _sleep_selectable, _min_uV, _max_uV, \
|
|
_supply_regulator, _system_uA, _init_peak_uA) \
|
|
RPM_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
|
|
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE \
|
|
| REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE \
|
|
| REGULATOR_CHANGE_DRMS, 0, _max_uV, _init_peak_uA, 0, _pd, \
|
|
RPM_VREG_PIN_CTRL_NONE, NONE, RPM_VREG_PIN_FN_8930_NONE, \
|
|
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
|
|
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
|
|
_supply_regulator, _system_uA)
|
|
|
|
#define RPM_SMPS(_id, _always_on, _pd, _sleep_selectable, _min_uV, _max_uV, \
|
|
_supply_regulator, _system_uA, _freq) \
|
|
RPM_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
|
|
| REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE \
|
|
| REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE \
|
|
| REGULATOR_CHANGE_DRMS, 0, _max_uV, _system_uA, 0, _pd, \
|
|
RPM_VREG_PIN_CTRL_NONE, _freq, RPM_VREG_PIN_FN_8930_NONE, \
|
|
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
|
|
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
|
|
_supply_regulator, _system_uA)
|
|
|
|
#define RPM_VS(_id, _always_on, _pd, _sleep_selectable, _supply_regulator) \
|
|
RPM_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, 0, 1000, 1000, _pd, \
|
|
RPM_VREG_PIN_CTRL_NONE, NONE, RPM_VREG_PIN_FN_8930_NONE, \
|
|
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
|
|
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
|
|
_supply_regulator, 0)
|
|
|
|
#define RPM_NCP(_id, _always_on, _sleep_selectable, _min_uV, _max_uV, \
|
|
_supply_regulator, _freq) \
|
|
RPM_INIT(_id, _min_uV, _max_uV, 0, REGULATOR_CHANGE_VOLTAGE \
|
|
| REGULATOR_CHANGE_STATUS, 0, _max_uV, 1000, 1000, 0, \
|
|
RPM_VREG_PIN_CTRL_NONE, _freq, RPM_VREG_PIN_FN_8930_NONE, \
|
|
RPM_VREG_FORCE_MODE_8930_NONE, RPM_VREG_POWER_MODE_8930_PWM, \
|
|
RPM_VREG_STATE_OFF, _sleep_selectable, _always_on, \
|
|
_supply_regulator, 0)
|
|
|
|
/* Pin control initialization */
|
|
#define RPM_PC_INIT(_id, _always_on, _pin_fn, _pin_ctrl, _supply_regulator) \
|
|
{ \
|
|
.init_data = { \
|
|
.constraints = { \
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
|
.always_on = _always_on, \
|
|
}, \
|
|
.num_consumer_supplies = \
|
|
ARRAY_SIZE(vreg_consumers_##_id##_PC), \
|
|
.consumer_supplies = vreg_consumers_##_id##_PC, \
|
|
.supply_regulator = _supply_regulator, \
|
|
}, \
|
|
.id = RPM_VREG_ID_PM8038_##_id##_PC, \
|
|
.pin_fn = RPM_VREG_PIN_FN_8930_##_pin_fn, \
|
|
.pin_ctrl = _pin_ctrl, \
|
|
}
|
|
|
|
#define GPIO_VREG(_id, _reg_name, _gpio_label, _gpio, _supply_regulator) \
|
|
[MSM8930_GPIO_VREG_ID_##_id] = { \
|
|
.init_data = { \
|
|
.constraints = { \
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
|
}, \
|
|
.num_consumer_supplies = \
|
|
ARRAY_SIZE(vreg_consumers_##_id), \
|
|
.consumer_supplies = vreg_consumers_##_id, \
|
|
.supply_regulator = _supply_regulator, \
|
|
}, \
|
|
.regulator_name = _reg_name, \
|
|
.gpio_label = _gpio_label, \
|
|
.gpio = _gpio, \
|
|
}
|
|
|
|
#define SAW_VREG_INIT(_id, _name, _min_uV, _max_uV) \
|
|
{ \
|
|
.constraints = { \
|
|
.name = _name, \
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, \
|
|
.min_uV = _min_uV, \
|
|
.max_uV = _max_uV, \
|
|
}, \
|
|
.num_consumer_supplies = ARRAY_SIZE(vreg_consumers_##_id), \
|
|
.consumer_supplies = vreg_consumers_##_id, \
|
|
}
|
|
|
|
/* GPIO regulator constraints */
|
|
struct gpio_regulator_platform_data
|
|
msm8930_gpio_regulator_pdata[] __devinitdata = {
|
|
/* ID vreg_name gpio_label gpio supply */
|
|
GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", 63, NULL),
|
|
GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en", 97, "ext_5v"),
|
|
};
|
|
|
|
/* SAW regulator constraints */
|
|
struct regulator_init_data msm8930_saw_regulator_core0_pdata =
|
|
/* ID vreg_name min_uV max_uV */
|
|
SAW_VREG_INIT(S5, "8038_s5", 850000, 1300000);
|
|
struct regulator_init_data msm8930_saw_regulator_core1_pdata =
|
|
SAW_VREG_INIT(S6, "8038_s6", 850000, 1300000);
|
|
|
|
/* PM8038 regulator constraints */
|
|
struct pm8xxx_regulator_platform_data
|
|
msm8930_pm8038_regulator_pdata[] __devinitdata = {
|
|
/*
|
|
* ID name always_on pd min_uV max_uV en_t supply
|
|
* system_uA reg_ID
|
|
*/
|
|
PM8XXX_NLDO1200(L16, "8038_l16", 0, 1, 1050000, 1050000, 200, "8038_s3",
|
|
0, 0),
|
|
PM8XXX_NLDO1200(L19, "8038_l19", 0, 1, 1050000, 1050000, 200, "8038_s3",
|
|
0, 1),
|
|
PM8XXX_NLDO1200(L27, "8038_l27", 0, 1, 1050000, 1050000, 200, "8038_s3",
|
|
0, 2),
|
|
};
|
|
|
|
static struct rpm_regulator_init_data
|
|
msm8930_rpm_regulator_init_data[] __devinitdata = {
|
|
/* ID a_on pd ss min_uV max_uV supply sys_uA freq */
|
|
RPM_SMPS(S1, 1, 1, 1, 500000, 1150000, NULL, 100000, 4p80),
|
|
RPM_SMPS(S2, 1, 1, 0, 1400000, 1400000, NULL, 100000, 1p60),
|
|
RPM_SMPS(S3, 0, 1, 0, 1150000, 1150000, NULL, 100000, 3p20),
|
|
RPM_SMPS(S4, 1, 1, 0, 2200000, 2200000, NULL, 100000, 1p60),
|
|
|
|
/* ID a_on pd ss min_uV max_uV supply sys_uA init_ip */
|
|
RPM_LDO(L1, 0, 1, 0, 1300000, 1300000, "8038_s2", 0, 0),
|
|
RPM_LDO(L2, 0, 1, 0, 1200000, 1200000, "8038_s2", 0, 0),
|
|
RPM_LDO(L3, 0, 1, 0, 3075000, 3075000, NULL, 0, 0),
|
|
RPM_LDO(L4, 1, 1, 0, 1800000, 1800000, NULL, 10000, 10000),
|
|
RPM_LDO(L5, 0, 1, 0, 2950000, 2950000, NULL, 0, 0),
|
|
RPM_LDO(L6, 0, 1, 0, 2950000, 2950000, NULL, 0, 0),
|
|
RPM_LDO(L7, 0, 1, 0, 2050000, 2050000, "8038_s4", 0, 0),
|
|
RPM_LDO(L8, 0, 1, 0, 2800000, 2800000, NULL, 0, 0),
|
|
RPM_LDO(L9, 0, 1, 0, 2850000, 2850000, NULL, 0, 0),
|
|
RPM_LDO(L10, 0, 1, 0, 2900000, 2900000, NULL, 0, 0),
|
|
RPM_LDO(L11, 1, 1, 0, 1800000, 1800000, "8038_s4", 10000, 10000),
|
|
RPM_LDO(L12, 0, 1, 0, 1200000, 1200000, "8038_s2", 0, 0),
|
|
RPM_LDO(L14, 0, 1, 0, 1800000, 1800000, NULL, 0, 0),
|
|
RPM_LDO(L15, 0, 1, 0, 1800000, 2950000, NULL, 0, 0),
|
|
RPM_LDO(L17, 0, 1, 0, 1800000, 2950000, NULL, 0, 0),
|
|
RPM_LDO(L18, 0, 1, 0, 1800000, 1800000, NULL, 0, 0),
|
|
RPM_LDO(L20, 1, 1, 0, 1200000, 1200000, "8038_s2", 10000, 10000),
|
|
RPM_LDO(L21, 0, 1, 0, 1900000, 1900000, "8038_s4", 0, 0),
|
|
RPM_LDO(L22, 1, 1, 0, 1850000, 2950000, NULL, 10000, 10000),
|
|
RPM_LDO(L23, 1, 1, 1, 1800000, 1800000, "8038_s4", 0, 0),
|
|
RPM_LDO(L24, 1, 1, 1, 500000, 1150000, "8038_s2", 10000, 10000),
|
|
RPM_LDO(L26, 1, 1, 0, 1050000, 1050000, "8038_s2", 10000, 10000),
|
|
|
|
/* ID a_on pd ss supply */
|
|
RPM_VS(LVS1, 0, 1, 0, "8038_l11"),
|
|
RPM_VS(LVS2, 0, 1, 0, "8038_l11"),
|
|
};
|
|
|
|
int msm8930_pm8038_regulator_pdata_len __devinitdata =
|
|
ARRAY_SIZE(msm8930_pm8038_regulator_pdata);
|
|
|
|
struct rpm_regulator_platform_data msm8930_rpm_regulator_pdata __devinitdata = {
|
|
.init_data = msm8930_rpm_regulator_init_data,
|
|
.num_regulators = ARRAY_SIZE(msm8930_rpm_regulator_init_data),
|
|
.version = RPM_VREG_VERSION_8930,
|
|
.vreg_id_vdd_mem = RPM_VREG_ID_PM8038_L24,
|
|
.vreg_id_vdd_dig = RPM_VREG_ID_PM8038_S1,
|
|
};
|