Files
kernel-tenderloin-3.0/drivers/usb
Jack Pham fe441ea593 usb: hsic_hcd: fix failure to re-suspend after remote wakeup
A disabled IRQ that is configured as a wakeup interrupt will trigger
a system resume, however since it is disabled, its handler will never
get called and its status register is never cleared. Thus upon
subsequent suspends it causes the system to immediately resume.

This was happening in the EHCI HSIC controller, in which remote wakeup
signaling on the STROBE line is treated as a wakeup IRQ. After the
first successful wakeup sequence, when the HSIC bus goes back into low
power mode the lingering uncleared interrupt prevents a system suspend
from executing successfully. This is fixed by enabling the IRQ in the
system suspend_noirq callback. The IRQ is subsequently disabled in
either the IRQ handler or the resume callback, whichever occurs first.

CRs-fixed: 343414
Change-Id: Ifc1c267408e76b98b8d848abde6eb44df9e0cdc0
Signed-off-by: Jack Pham <jackp@codeaurora.org>
2012-03-23 18:27:21 -07:00
..

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.