Now that rcg_clk_set_min_rate() has been removed, _rcg_clk_set_rate() is only called from one place and is unlikely to ever be called from somewhere else. Combine the caller with the callee. Change-Id: Id72fbaf67e50b0cb6cc165dccbce9d29bfab9baa Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
1113 lines
28 KiB
C
1113 lines
28 KiB
C
/* Copyright (c) 2009-2012, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "%s: " fmt, __func__
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <mach/msm_iomap.h>
|
|
#include <mach/clk.h>
|
|
#include <mach/scm-io.h>
|
|
|
|
#include "clock.h"
|
|
#include "clock-local.h"
|
|
|
|
#ifdef CONFIG_MSM_SECURE_IO
|
|
#undef readl_relaxed
|
|
#undef writel_relaxed
|
|
#define readl_relaxed secure_readl
|
|
#define writel_relaxed secure_writel
|
|
#endif
|
|
|
|
/*
|
|
* When enabling/disabling a clock, check the halt bit up to this number
|
|
* number of times (with a 1 us delay in between) before continuing.
|
|
*/
|
|
#define HALT_CHECK_MAX_LOOPS 200
|
|
/* For clock without halt checking, wait this long after enables/disables. */
|
|
#define HALT_CHECK_DELAY_US 10
|
|
|
|
DEFINE_SPINLOCK(local_clock_reg_lock);
|
|
struct clk_freq_tbl rcg_dummy_freq = F_END;
|
|
|
|
/*
|
|
* Common Set-Rate Functions
|
|
*/
|
|
|
|
/* For clocks with MND dividers. */
|
|
void set_rate_mnd(struct rcg_clk *clk, struct clk_freq_tbl *nf)
|
|
{
|
|
uint32_t ns_reg_val, ctl_reg_val;
|
|
|
|
/* Assert MND reset. */
|
|
ns_reg_val = readl_relaxed(clk->ns_reg);
|
|
ns_reg_val |= BIT(7);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
|
|
/* Program M and D values. */
|
|
writel_relaxed(nf->md_val, clk->md_reg);
|
|
|
|
/* If the clock has a separate CC register, program it. */
|
|
if (clk->ns_reg != clk->b.ctl_reg) {
|
|
ctl_reg_val = readl_relaxed(clk->b.ctl_reg);
|
|
ctl_reg_val &= ~(clk->ctl_mask);
|
|
ctl_reg_val |= nf->ctl_val;
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
}
|
|
|
|
/* Deassert MND reset. */
|
|
ns_reg_val &= ~BIT(7);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
}
|
|
|
|
void set_rate_nop(struct rcg_clk *clk, struct clk_freq_tbl *nf)
|
|
{
|
|
/*
|
|
* Nothing to do for fixed-rate or integer-divider clocks. Any settings
|
|
* in NS registers are applied in the enable path, since power can be
|
|
* saved by leaving an un-clocked or slowly-clocked source selected
|
|
* until the clock is enabled.
|
|
*/
|
|
}
|
|
|
|
void set_rate_mnd_8(struct rcg_clk *clk, struct clk_freq_tbl *nf)
|
|
{
|
|
uint32_t ctl_reg_val;
|
|
|
|
/* Assert MND reset. */
|
|
ctl_reg_val = readl_relaxed(clk->b.ctl_reg);
|
|
ctl_reg_val |= BIT(8);
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
|
|
/* Program M and D values. */
|
|
writel_relaxed(nf->md_val, clk->md_reg);
|
|
|
|
/* Program MN counter Enable and Mode. */
|
|
ctl_reg_val &= ~(clk->ctl_mask);
|
|
ctl_reg_val |= nf->ctl_val;
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
|
|
/* Deassert MND reset. */
|
|
ctl_reg_val &= ~BIT(8);
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
}
|
|
|
|
void set_rate_mnd_banked(struct rcg_clk *clk, struct clk_freq_tbl *nf)
|
|
{
|
|
struct bank_masks *banks = clk->bank_info;
|
|
const struct bank_mask_info *new_bank_masks;
|
|
const struct bank_mask_info *old_bank_masks;
|
|
uint32_t ns_reg_val, ctl_reg_val;
|
|
uint32_t bank_sel;
|
|
|
|
/*
|
|
* Determine active bank and program the other one. If the clock is
|
|
* off, program the active bank since bank switching won't work if
|
|
* both banks aren't running.
|
|
*/
|
|
ctl_reg_val = readl_relaxed(clk->b.ctl_reg);
|
|
bank_sel = !!(ctl_reg_val & banks->bank_sel_mask);
|
|
/* If clock isn't running, don't switch banks. */
|
|
bank_sel ^= (!clk->enabled || clk->current_freq->freq_hz == 0);
|
|
if (bank_sel == 0) {
|
|
new_bank_masks = &banks->bank1_mask;
|
|
old_bank_masks = &banks->bank0_mask;
|
|
} else {
|
|
new_bank_masks = &banks->bank0_mask;
|
|
old_bank_masks = &banks->bank1_mask;
|
|
}
|
|
|
|
ns_reg_val = readl_relaxed(clk->ns_reg);
|
|
|
|
/* Assert bank MND reset. */
|
|
ns_reg_val |= new_bank_masks->rst_mask;
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
|
|
/*
|
|
* Program NS only if the clock is enabled, since the NS will be set
|
|
* as part of the enable procedure and should remain with a low-power
|
|
* MUX input selected until then.
|
|
*/
|
|
if (clk->enabled) {
|
|
ns_reg_val &= ~(new_bank_masks->ns_mask);
|
|
ns_reg_val |= (nf->ns_val & new_bank_masks->ns_mask);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
}
|
|
|
|
writel_relaxed(nf->md_val, new_bank_masks->md_reg);
|
|
|
|
/* Enable counter only if clock is enabled. */
|
|
if (clk->enabled)
|
|
ctl_reg_val |= new_bank_masks->mnd_en_mask;
|
|
else
|
|
ctl_reg_val &= ~(new_bank_masks->mnd_en_mask);
|
|
|
|
ctl_reg_val &= ~(new_bank_masks->mode_mask);
|
|
ctl_reg_val |= (nf->ctl_val & new_bank_masks->mode_mask);
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
|
|
/* Deassert bank MND reset. */
|
|
ns_reg_val &= ~(new_bank_masks->rst_mask);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
|
|
/*
|
|
* Switch to the new bank if clock is running. If it isn't, then
|
|
* no switch is necessary since we programmed the active bank.
|
|
*/
|
|
if (clk->enabled && clk->current_freq->freq_hz) {
|
|
ctl_reg_val ^= banks->bank_sel_mask;
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
/*
|
|
* Wait at least 6 cycles of slowest bank's clock
|
|
* for the glitch-free MUX to fully switch sources.
|
|
*/
|
|
mb();
|
|
udelay(1);
|
|
|
|
/* Disable old bank's MN counter. */
|
|
ctl_reg_val &= ~(old_bank_masks->mnd_en_mask);
|
|
writel_relaxed(ctl_reg_val, clk->b.ctl_reg);
|
|
|
|
/* Program old bank to a low-power source and divider. */
|
|
ns_reg_val &= ~(old_bank_masks->ns_mask);
|
|
ns_reg_val |= (clk->freq_tbl->ns_val & old_bank_masks->ns_mask);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
}
|
|
|
|
/*
|
|
* If this freq requires the MN counter to be enabled,
|
|
* update the enable mask to match the current bank.
|
|
*/
|
|
if (nf->mnd_en_mask)
|
|
nf->mnd_en_mask = new_bank_masks->mnd_en_mask;
|
|
/* Update the NS mask to match the current bank. */
|
|
clk->ns_mask = new_bank_masks->ns_mask;
|
|
}
|
|
|
|
void set_rate_div_banked(struct rcg_clk *clk, struct clk_freq_tbl *nf)
|
|
{
|
|
struct bank_masks *banks = clk->bank_info;
|
|
const struct bank_mask_info *new_bank_masks;
|
|
const struct bank_mask_info *old_bank_masks;
|
|
uint32_t ns_reg_val, bank_sel;
|
|
|
|
/*
|
|
* Determine active bank and program the other one. If the clock is
|
|
* off, program the active bank since bank switching won't work if
|
|
* both banks aren't running.
|
|
*/
|
|
ns_reg_val = readl_relaxed(clk->ns_reg);
|
|
bank_sel = !!(ns_reg_val & banks->bank_sel_mask);
|
|
/* If clock isn't running, don't switch banks. */
|
|
bank_sel ^= (!clk->enabled || clk->current_freq->freq_hz == 0);
|
|
if (bank_sel == 0) {
|
|
new_bank_masks = &banks->bank1_mask;
|
|
old_bank_masks = &banks->bank0_mask;
|
|
} else {
|
|
new_bank_masks = &banks->bank0_mask;
|
|
old_bank_masks = &banks->bank1_mask;
|
|
}
|
|
|
|
/*
|
|
* Program NS only if the clock is enabled, since the NS will be set
|
|
* as part of the enable procedure and should remain with a low-power
|
|
* MUX input selected until then.
|
|
*/
|
|
if (clk->enabled) {
|
|
ns_reg_val &= ~(new_bank_masks->ns_mask);
|
|
ns_reg_val |= (nf->ns_val & new_bank_masks->ns_mask);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
}
|
|
|
|
/*
|
|
* Switch to the new bank if clock is running. If it isn't, then
|
|
* no switch is necessary since we programmed the active bank.
|
|
*/
|
|
if (clk->enabled && clk->current_freq->freq_hz) {
|
|
ns_reg_val ^= banks->bank_sel_mask;
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
/*
|
|
* Wait at least 6 cycles of slowest bank's clock
|
|
* for the glitch-free MUX to fully switch sources.
|
|
*/
|
|
mb();
|
|
udelay(1);
|
|
|
|
/* Program old bank to a low-power source and divider. */
|
|
ns_reg_val &= ~(old_bank_masks->ns_mask);
|
|
ns_reg_val |= (clk->freq_tbl->ns_val & old_bank_masks->ns_mask);
|
|
writel_relaxed(ns_reg_val, clk->ns_reg);
|
|
}
|
|
|
|
/* Update the NS mask to match the current bank. */
|
|
clk->ns_mask = new_bank_masks->ns_mask;
|
|
}
|
|
|
|
/*
|
|
* Clock enable/disable functions
|
|
*/
|
|
|
|
/* Return non-zero if a clock status registers shows the clock is halted. */
|
|
static int branch_clk_is_halted(const struct branch *clk)
|
|
{
|
|
int invert = (clk->halt_check == ENABLE);
|
|
int status_bit = readl_relaxed(clk->halt_reg) & BIT(clk->halt_bit);
|
|
return invert ? !status_bit : status_bit;
|
|
}
|
|
|
|
int branch_in_hwcg_mode(const struct branch *b)
|
|
{
|
|
if (!b->hwcg_mask)
|
|
return 0;
|
|
|
|
return !!(readl_relaxed(b->hwcg_reg) & b->hwcg_mask);
|
|
}
|
|
|
|
void __branch_clk_enable_reg(const struct branch *clk, const char *name)
|
|
{
|
|
u32 reg_val;
|
|
|
|
if (clk->en_mask) {
|
|
reg_val = readl_relaxed(clk->ctl_reg);
|
|
reg_val |= clk->en_mask;
|
|
writel_relaxed(reg_val, clk->ctl_reg);
|
|
}
|
|
|
|
/*
|
|
* Use a memory barrier since some halt status registers are
|
|
* not within the same 1K segment as the branch/root enable
|
|
* registers. It's also needed in the udelay() case to ensure
|
|
* the delay starts after the branch enable.
|
|
*/
|
|
mb();
|
|
|
|
/* Skip checking halt bit if the clock is in hardware gated mode */
|
|
if (branch_in_hwcg_mode(clk))
|
|
return;
|
|
|
|
/* Wait for clock to enable before returning. */
|
|
if (clk->halt_check == DELAY)
|
|
udelay(HALT_CHECK_DELAY_US);
|
|
else if (clk->halt_check == ENABLE || clk->halt_check == HALT
|
|
|| clk->halt_check == ENABLE_VOTED
|
|
|| clk->halt_check == HALT_VOTED) {
|
|
int count;
|
|
|
|
/* Wait up to HALT_CHECK_MAX_LOOPS for clock to enable. */
|
|
for (count = HALT_CHECK_MAX_LOOPS; branch_clk_is_halted(clk)
|
|
&& count > 0; count--)
|
|
udelay(1);
|
|
WARN(count == 0, "%s status stuck at 'off'", name);
|
|
}
|
|
}
|
|
|
|
/* Perform any register operations required to enable the clock. */
|
|
static void __rcg_clk_enable_reg(struct rcg_clk *clk)
|
|
{
|
|
u32 reg_val;
|
|
void __iomem *const reg = clk->b.ctl_reg;
|
|
|
|
WARN(clk->current_freq == &rcg_dummy_freq,
|
|
"Attempting to enable %s before setting its rate. "
|
|
"Set the rate first!\n", clk->c.dbg_name);
|
|
|
|
/*
|
|
* Program the NS register, if applicable. NS registers are not
|
|
* set in the set_rate path because power can be saved by deferring
|
|
* the selection of a clocked source until the clock is enabled.
|
|
*/
|
|
if (clk->ns_mask) {
|
|
reg_val = readl_relaxed(clk->ns_reg);
|
|
reg_val &= ~(clk->ns_mask);
|
|
reg_val |= (clk->current_freq->ns_val & clk->ns_mask);
|
|
writel_relaxed(reg_val, clk->ns_reg);
|
|
}
|
|
|
|
/* Enable MN counter, if applicable. */
|
|
reg_val = readl_relaxed(reg);
|
|
if (clk->current_freq->mnd_en_mask) {
|
|
reg_val |= clk->current_freq->mnd_en_mask;
|
|
writel_relaxed(reg_val, reg);
|
|
}
|
|
/* Enable root. */
|
|
if (clk->root_en_mask) {
|
|
reg_val |= clk->root_en_mask;
|
|
writel_relaxed(reg_val, reg);
|
|
}
|
|
__branch_clk_enable_reg(&clk->b, clk->c.dbg_name);
|
|
}
|
|
|
|
/* Perform any register operations required to disable the branch. */
|
|
u32 __branch_clk_disable_reg(const struct branch *clk, const char *name)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = readl_relaxed(clk->ctl_reg);
|
|
if (clk->en_mask) {
|
|
reg_val &= ~(clk->en_mask);
|
|
writel_relaxed(reg_val, clk->ctl_reg);
|
|
}
|
|
|
|
/*
|
|
* Use a memory barrier since some halt status registers are
|
|
* not within the same K segment as the branch/root enable
|
|
* registers. It's also needed in the udelay() case to ensure
|
|
* the delay starts after the branch disable.
|
|
*/
|
|
mb();
|
|
|
|
/* Skip checking halt bit if the clock is in hardware gated mode */
|
|
if (branch_in_hwcg_mode(clk))
|
|
return reg_val;
|
|
|
|
/* Wait for clock to disable before continuing. */
|
|
if (clk->halt_check == DELAY || clk->halt_check == ENABLE_VOTED
|
|
|| clk->halt_check == HALT_VOTED)
|
|
udelay(HALT_CHECK_DELAY_US);
|
|
else if (clk->halt_check == ENABLE || clk->halt_check == HALT) {
|
|
int count;
|
|
|
|
/* Wait up to HALT_CHECK_MAX_LOOPS for clock to disable. */
|
|
for (count = HALT_CHECK_MAX_LOOPS; !branch_clk_is_halted(clk)
|
|
&& count > 0; count--)
|
|
udelay(1);
|
|
WARN(count == 0, "%s status stuck at 'on'", name);
|
|
}
|
|
|
|
return reg_val;
|
|
}
|
|
|
|
/* Perform any register operations required to disable the generator. */
|
|
static void __rcg_clk_disable_reg(struct rcg_clk *clk)
|
|
{
|
|
void __iomem *const reg = clk->b.ctl_reg;
|
|
uint32_t reg_val;
|
|
|
|
reg_val = __branch_clk_disable_reg(&clk->b, clk->c.dbg_name);
|
|
/* Disable root. */
|
|
if (clk->root_en_mask) {
|
|
reg_val &= ~(clk->root_en_mask);
|
|
writel_relaxed(reg_val, reg);
|
|
}
|
|
/* Disable MN counter, if applicable. */
|
|
if (clk->current_freq->mnd_en_mask) {
|
|
reg_val &= ~(clk->current_freq->mnd_en_mask);
|
|
writel_relaxed(reg_val, reg);
|
|
}
|
|
/*
|
|
* Program NS register to low-power value with an un-clocked or
|
|
* slowly-clocked source selected.
|
|
*/
|
|
if (clk->ns_mask) {
|
|
reg_val = readl_relaxed(clk->ns_reg);
|
|
reg_val &= ~(clk->ns_mask);
|
|
reg_val |= (clk->freq_tbl->ns_val & clk->ns_mask);
|
|
writel_relaxed(reg_val, clk->ns_reg);
|
|
}
|
|
}
|
|
|
|
/* Enable a rate-settable clock. */
|
|
int rcg_clk_enable(struct clk *c)
|
|
{
|
|
unsigned long flags;
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
__rcg_clk_enable_reg(clk);
|
|
clk->enabled = true;
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Disable a rate-settable clock. */
|
|
void rcg_clk_disable(struct clk *c)
|
|
{
|
|
unsigned long flags;
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
__rcg_clk_disable_reg(clk);
|
|
clk->enabled = false;
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Frequency-related functions
|
|
*/
|
|
|
|
/* Set a clock to an exact rate. */
|
|
int rcg_clk_set_rate(struct clk *c, unsigned long rate)
|
|
{
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
struct clk_freq_tbl *nf, *cf;
|
|
struct clk *chld;
|
|
int rc = 0;
|
|
|
|
for (nf = clk->freq_tbl; nf->freq_hz != FREQ_END
|
|
&& nf->freq_hz != rate; nf++)
|
|
;
|
|
|
|
if (nf->freq_hz == FREQ_END)
|
|
return -EINVAL;
|
|
|
|
/* Check if frequency is actually changed. */
|
|
cf = clk->current_freq;
|
|
if (nf == cf)
|
|
return 0;
|
|
|
|
if (clk->enabled) {
|
|
/* Enable source clock dependency for the new freq. */
|
|
rc = clk_enable(nf->src_clk);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
spin_lock(&local_clock_reg_lock);
|
|
|
|
/* Disable branch if clock isn't dual-banked with a glitch-free MUX. */
|
|
if (!clk->bank_info) {
|
|
/* Disable all branches to prevent glitches. */
|
|
list_for_each_entry(chld, &clk->c.children, siblings) {
|
|
struct branch_clk *x = to_branch_clk(chld);
|
|
/*
|
|
* We don't need to grab the child's lock because
|
|
* we hold the local_clock_reg_lock and 'enabled' is
|
|
* only modified within lock.
|
|
*/
|
|
if (x->enabled)
|
|
__branch_clk_disable_reg(&x->b, x->c.dbg_name);
|
|
}
|
|
if (clk->enabled)
|
|
__rcg_clk_disable_reg(clk);
|
|
}
|
|
|
|
/* Perform clock-specific frequency switch operations. */
|
|
BUG_ON(!clk->set_rate);
|
|
clk->set_rate(clk, nf);
|
|
|
|
/*
|
|
* Current freq must be updated before __rcg_clk_enable_reg()
|
|
* is called to make sure the MNCNTR_EN bit is set correctly.
|
|
*/
|
|
clk->current_freq = nf;
|
|
|
|
/* Enable any clocks that were disabled. */
|
|
if (!clk->bank_info) {
|
|
if (clk->enabled)
|
|
__rcg_clk_enable_reg(clk);
|
|
/* Enable only branches that were ON before. */
|
|
list_for_each_entry(chld, &clk->c.children, siblings) {
|
|
struct branch_clk *x = to_branch_clk(chld);
|
|
if (x->enabled)
|
|
__branch_clk_enable_reg(&x->b, x->c.dbg_name);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&local_clock_reg_lock);
|
|
|
|
/* Release source requirements of the old freq. */
|
|
if (clk->enabled)
|
|
clk_disable(cf->src_clk);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Get the currently-set rate of a clock in Hz. */
|
|
unsigned long rcg_clk_get_rate(struct clk *c)
|
|
{
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
unsigned long flags;
|
|
unsigned ret = 0;
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
ret = clk->current_freq->freq_hz;
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
|
|
/*
|
|
* Return 0 if the rate has never been set. Might not be correct,
|
|
* but it's good enough.
|
|
*/
|
|
if (ret == FREQ_END)
|
|
ret = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Check if a clock is currently enabled. */
|
|
int rcg_clk_is_enabled(struct clk *clk)
|
|
{
|
|
return to_rcg_clk(clk)->enabled;
|
|
}
|
|
|
|
/* Return a supported rate that's at least the specified rate. */
|
|
long rcg_clk_round_rate(struct clk *c, unsigned long rate)
|
|
{
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
struct clk_freq_tbl *f;
|
|
|
|
for (f = clk->freq_tbl; f->freq_hz != FREQ_END; f++)
|
|
if (f->freq_hz >= rate)
|
|
return f->freq_hz;
|
|
|
|
return -EPERM;
|
|
}
|
|
|
|
bool local_clk_is_local(struct clk *clk)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
/* Return the nth supported frequency for a given clock. */
|
|
int rcg_clk_list_rate(struct clk *c, unsigned n)
|
|
{
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
|
|
if (!clk->freq_tbl || clk->freq_tbl->freq_hz == FREQ_END)
|
|
return -ENXIO;
|
|
|
|
return (clk->freq_tbl + n)->freq_hz;
|
|
}
|
|
|
|
struct clk *rcg_clk_get_parent(struct clk *clk)
|
|
{
|
|
return to_rcg_clk(clk)->current_freq->src_clk;
|
|
}
|
|
|
|
/* Disable hw clock gating if not set at boot */
|
|
static void branch_handoff(struct branch *clk, struct clk *c)
|
|
{
|
|
if (!branch_in_hwcg_mode(clk)) {
|
|
clk->hwcg_mask = 0;
|
|
c->flags &= ~CLKFLAG_HWCG;
|
|
} else {
|
|
c->flags |= CLKFLAG_HWCG;
|
|
}
|
|
}
|
|
|
|
int branch_clk_handoff(struct clk *c)
|
|
{
|
|
struct branch_clk *clk = to_branch_clk(c);
|
|
branch_handoff(&clk->b, &clk->c);
|
|
return 0;
|
|
}
|
|
|
|
int rcg_clk_handoff(struct clk *c)
|
|
{
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
uint32_t ctl_val, ns_val, md_val, ns_mask;
|
|
struct clk_freq_tbl *freq;
|
|
|
|
branch_handoff(&clk->b, &clk->c);
|
|
|
|
ctl_val = readl_relaxed(clk->b.ctl_reg);
|
|
if (!(ctl_val & clk->root_en_mask))
|
|
return 0;
|
|
|
|
if (clk->bank_info) {
|
|
const struct bank_masks *bank_masks = clk->bank_info;
|
|
const struct bank_mask_info *bank_info;
|
|
if (!(ctl_val & bank_masks->bank_sel_mask))
|
|
bank_info = &bank_masks->bank0_mask;
|
|
else
|
|
bank_info = &bank_masks->bank1_mask;
|
|
|
|
ns_mask = bank_info->ns_mask;
|
|
md_val = readl_relaxed(bank_info->md_reg);
|
|
} else {
|
|
ns_mask = clk->ns_mask;
|
|
md_val = clk->md_reg ? readl_relaxed(clk->md_reg) : 0;
|
|
}
|
|
|
|
ns_val = readl_relaxed(clk->ns_reg) & ns_mask;
|
|
for (freq = clk->freq_tbl; freq->freq_hz != FREQ_END; freq++) {
|
|
if ((freq->ns_val & ns_mask) == ns_val &&
|
|
(!freq->mnd_en_mask || freq->md_val == md_val)) {
|
|
pr_info("%s rate=%d\n", clk->c.dbg_name, freq->freq_hz);
|
|
break;
|
|
}
|
|
}
|
|
if (freq->freq_hz == FREQ_END)
|
|
return 0;
|
|
|
|
clk->current_freq = freq;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int pll_vote_clk_enable(struct clk *clk)
|
|
{
|
|
u32 ena;
|
|
unsigned long flags;
|
|
struct pll_vote_clk *pll = to_pll_vote_clk(clk);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
ena = readl_relaxed(pll->en_reg);
|
|
ena |= pll->en_mask;
|
|
writel_relaxed(ena, pll->en_reg);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
|
|
/* Wait until PLL is enabled */
|
|
while ((readl_relaxed(pll->status_reg) & BIT(16)) == 0)
|
|
cpu_relax();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void pll_vote_clk_disable(struct clk *clk)
|
|
{
|
|
u32 ena;
|
|
unsigned long flags;
|
|
struct pll_vote_clk *pll = to_pll_vote_clk(clk);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
ena = readl_relaxed(pll->en_reg);
|
|
ena &= ~(pll->en_mask);
|
|
writel_relaxed(ena, pll->en_reg);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
unsigned long pll_vote_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct pll_vote_clk *pll = to_pll_vote_clk(clk);
|
|
return pll->rate;
|
|
}
|
|
|
|
struct clk *pll_vote_clk_get_parent(struct clk *clk)
|
|
{
|
|
struct pll_vote_clk *pll = to_pll_vote_clk(clk);
|
|
return pll->parent;
|
|
}
|
|
|
|
int pll_vote_clk_is_enabled(struct clk *clk)
|
|
{
|
|
struct pll_vote_clk *pll = to_pll_vote_clk(clk);
|
|
return !!(readl_relaxed(pll->status_reg) & BIT(16));
|
|
}
|
|
|
|
struct clk_ops clk_ops_pll_vote = {
|
|
.enable = pll_vote_clk_enable,
|
|
.disable = pll_vote_clk_disable,
|
|
.auto_off = pll_vote_clk_disable,
|
|
.is_enabled = pll_vote_clk_is_enabled,
|
|
.get_rate = pll_vote_clk_get_rate,
|
|
.get_parent = pll_vote_clk_get_parent,
|
|
.is_local = local_clk_is_local,
|
|
};
|
|
|
|
static int pll_clk_enable(struct clk *clk)
|
|
{
|
|
u32 mode;
|
|
unsigned long flags;
|
|
struct pll_clk *pll = to_pll_clk(clk);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
mode = readl_relaxed(pll->mode_reg);
|
|
/* Disable PLL bypass mode. */
|
|
mode |= BIT(1);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
|
|
/*
|
|
* H/W requires a 5us delay between disabling the bypass and
|
|
* de-asserting the reset. Delay 10us just to be safe.
|
|
*/
|
|
mb();
|
|
udelay(10);
|
|
|
|
/* De-assert active-low PLL reset. */
|
|
mode |= BIT(2);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
|
|
/* Wait until PLL is locked. */
|
|
mb();
|
|
udelay(50);
|
|
|
|
/* Enable PLL output. */
|
|
mode |= BIT(0);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static void pll_clk_disable(struct clk *clk)
|
|
{
|
|
u32 mode;
|
|
unsigned long flags;
|
|
struct pll_clk *pll = to_pll_clk(clk);
|
|
|
|
/*
|
|
* Disable the PLL output, disable test mode, enable
|
|
* the bypass mode, and assert the reset.
|
|
*/
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
mode = readl_relaxed(pll->mode_reg);
|
|
mode &= ~BM(3, 0);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
static unsigned long pll_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct pll_clk *pll = to_pll_clk(clk);
|
|
return pll->rate;
|
|
}
|
|
|
|
static struct clk *pll_clk_get_parent(struct clk *clk)
|
|
{
|
|
struct pll_clk *pll = to_pll_clk(clk);
|
|
return pll->parent;
|
|
}
|
|
|
|
int sr_pll_clk_enable(struct clk *clk)
|
|
{
|
|
u32 mode;
|
|
unsigned long flags;
|
|
struct pll_clk *pll = to_pll_clk(clk);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
mode = readl_relaxed(pll->mode_reg);
|
|
/* De-assert active-low PLL reset. */
|
|
mode |= BIT(2);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
|
|
/*
|
|
* H/W requires a 5us delay between disabling the bypass and
|
|
* de-asserting the reset. Delay 10us just to be safe.
|
|
*/
|
|
mb();
|
|
udelay(10);
|
|
|
|
/* Disable PLL bypass mode. */
|
|
mode |= BIT(1);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
|
|
/* Wait until PLL is locked. */
|
|
mb();
|
|
udelay(60);
|
|
|
|
/* Enable PLL output. */
|
|
mode |= BIT(0);
|
|
writel_relaxed(mode, pll->mode_reg);
|
|
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
struct clk_ops clk_ops_pll = {
|
|
.enable = pll_clk_enable,
|
|
.disable = pll_clk_disable,
|
|
.auto_off = pll_clk_disable,
|
|
.get_rate = pll_clk_get_rate,
|
|
.get_parent = pll_clk_get_parent,
|
|
.is_local = local_clk_is_local,
|
|
};
|
|
|
|
struct clk_ops clk_ops_gnd = {
|
|
.get_rate = fixed_clk_get_rate,
|
|
.is_local = local_clk_is_local,
|
|
};
|
|
|
|
struct fixed_clk gnd_clk = {
|
|
.c = {
|
|
.dbg_name = "ground_clk",
|
|
.ops = &clk_ops_gnd,
|
|
CLK_INIT(gnd_clk.c),
|
|
},
|
|
};
|
|
|
|
struct clk_ops clk_ops_measure = {
|
|
.is_local = local_clk_is_local,
|
|
};
|
|
|
|
int branch_clk_enable(struct clk *clk)
|
|
{
|
|
unsigned long flags;
|
|
struct branch_clk *branch = to_branch_clk(clk);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
__branch_clk_enable_reg(&branch->b, branch->c.dbg_name);
|
|
branch->enabled = true;
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void branch_clk_disable(struct clk *clk)
|
|
{
|
|
unsigned long flags;
|
|
struct branch_clk *branch = to_branch_clk(clk);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
__branch_clk_disable_reg(&branch->b, branch->c.dbg_name);
|
|
branch->enabled = false;
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
struct clk *branch_clk_get_parent(struct clk *clk)
|
|
{
|
|
struct branch_clk *branch = to_branch_clk(clk);
|
|
return branch->parent;
|
|
}
|
|
|
|
int branch_clk_set_parent(struct clk *clk, struct clk *parent)
|
|
{
|
|
/*
|
|
* We setup the parent pointer at init time in msm_clock_init().
|
|
* This check is to make sure drivers can't change the parent.
|
|
*/
|
|
if (parent && list_empty(&clk->siblings)) {
|
|
list_add(&clk->siblings, &parent->children);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
int branch_clk_is_enabled(struct clk *clk)
|
|
{
|
|
struct branch_clk *branch = to_branch_clk(clk);
|
|
return branch->enabled;
|
|
}
|
|
|
|
static void branch_enable_hwcg(struct branch *b)
|
|
{
|
|
unsigned long flags;
|
|
u32 reg_val;
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
reg_val = readl_relaxed(b->hwcg_reg);
|
|
reg_val |= b->hwcg_mask;
|
|
writel_relaxed(reg_val, b->hwcg_reg);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
static void branch_disable_hwcg(struct branch *b)
|
|
{
|
|
unsigned long flags;
|
|
u32 reg_val;
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
reg_val = readl_relaxed(b->hwcg_reg);
|
|
reg_val &= ~b->hwcg_mask;
|
|
writel_relaxed(reg_val, b->hwcg_reg);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
void branch_clk_enable_hwcg(struct clk *clk)
|
|
{
|
|
struct branch_clk *branch = to_branch_clk(clk);
|
|
branch_enable_hwcg(&branch->b);
|
|
}
|
|
|
|
void branch_clk_disable_hwcg(struct clk *clk)
|
|
{
|
|
struct branch_clk *branch = to_branch_clk(clk);
|
|
branch_disable_hwcg(&branch->b);
|
|
}
|
|
|
|
int branch_clk_in_hwcg_mode(struct clk *c)
|
|
{
|
|
struct branch_clk *clk = to_branch_clk(c);
|
|
return branch_in_hwcg_mode(&clk->b);
|
|
}
|
|
|
|
void rcg_clk_enable_hwcg(struct clk *clk)
|
|
{
|
|
struct rcg_clk *rcg = to_rcg_clk(clk);
|
|
branch_enable_hwcg(&rcg->b);
|
|
}
|
|
|
|
void rcg_clk_disable_hwcg(struct clk *clk)
|
|
{
|
|
struct rcg_clk *rcg = to_rcg_clk(clk);
|
|
branch_disable_hwcg(&rcg->b);
|
|
}
|
|
|
|
int rcg_clk_in_hwcg_mode(struct clk *c)
|
|
{
|
|
struct rcg_clk *clk = to_rcg_clk(c);
|
|
return branch_in_hwcg_mode(&clk->b);
|
|
}
|
|
|
|
int branch_reset(struct branch *b, enum clk_reset_action action)
|
|
{
|
|
int ret = 0;
|
|
u32 reg_val;
|
|
unsigned long flags;
|
|
|
|
if (!b->reset_reg)
|
|
return -EPERM;
|
|
|
|
/* Disable hw gating when asserting a reset */
|
|
if (b->hwcg_mask && action == CLK_RESET_ASSERT)
|
|
branch_disable_hwcg(b);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
/* Assert/Deassert reset */
|
|
reg_val = readl_relaxed(b->reset_reg);
|
|
switch (action) {
|
|
case CLK_RESET_ASSERT:
|
|
reg_val |= b->reset_mask;
|
|
break;
|
|
case CLK_RESET_DEASSERT:
|
|
reg_val &= ~b->reset_mask;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
writel_relaxed(reg_val, b->reset_reg);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
|
|
/* Enable hw gating when deasserting a reset */
|
|
if (b->hwcg_mask && action == CLK_RESET_DEASSERT)
|
|
branch_enable_hwcg(b);
|
|
/* Make sure write is issued before returning. */
|
|
mb();
|
|
return ret;
|
|
}
|
|
|
|
int branch_clk_reset(struct clk *clk, enum clk_reset_action action)
|
|
{
|
|
return branch_reset(&to_branch_clk(clk)->b, action);
|
|
}
|
|
|
|
int rcg_clk_reset(struct clk *clk, enum clk_reset_action action)
|
|
{
|
|
return branch_reset(&to_rcg_clk(clk)->b, action);
|
|
}
|
|
|
|
static int cdiv_clk_enable(struct clk *c)
|
|
{
|
|
unsigned long flags;
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
__branch_clk_enable_reg(&clk->b, clk->c.dbg_name);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cdiv_clk_disable(struct clk *c)
|
|
{
|
|
unsigned long flags;
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
|
|
spin_lock_irqsave(&local_clock_reg_lock, flags);
|
|
__branch_clk_disable_reg(&clk->b, clk->c.dbg_name);
|
|
spin_unlock_irqrestore(&local_clock_reg_lock, flags);
|
|
}
|
|
|
|
static int cdiv_clk_set_rate(struct clk *c, unsigned long rate)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
u32 reg_val;
|
|
|
|
if (rate > clk->max_div)
|
|
return -EINVAL;
|
|
/* Check if frequency is actually changed. */
|
|
if (rate == clk->cur_div)
|
|
return 0;
|
|
|
|
spin_lock(&local_clock_reg_lock);
|
|
reg_val = readl_relaxed(clk->ns_reg);
|
|
reg_val &= ~(clk->ext_mask | (clk->max_div - 1) << clk->div_offset);
|
|
/* Non-zero rates mean set a divider, zero means use external input */
|
|
if (rate)
|
|
reg_val |= (rate - 1) << clk->div_offset;
|
|
else
|
|
reg_val |= clk->ext_mask;
|
|
writel_relaxed(reg_val, clk->ns_reg);
|
|
spin_unlock(&local_clock_reg_lock);
|
|
|
|
clk->cur_div = rate;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long cdiv_clk_get_rate(struct clk *c)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
return clk->cur_div;
|
|
}
|
|
|
|
static long cdiv_clk_round_rate(struct clk *c, unsigned long rate)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
return rate > clk->max_div ? -EPERM : rate;
|
|
}
|
|
|
|
static int cdiv_clk_list_rate(struct clk *c, unsigned n)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
return n > clk->max_div ? -ENXIO : n;
|
|
}
|
|
|
|
static int cdiv_clk_handoff(struct clk *c)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
u32 reg_val;
|
|
|
|
branch_handoff(&clk->b, &clk->c);
|
|
|
|
reg_val = readl_relaxed(clk->ns_reg);
|
|
if (reg_val & clk->ext_mask) {
|
|
clk->cur_div = 0;
|
|
} else {
|
|
reg_val >>= clk->div_offset;
|
|
clk->cur_div = (reg_val & (clk->max_div - 1)) + 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cdiv_clk_enable_hwcg(struct clk *c)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
branch_enable_hwcg(&clk->b);
|
|
}
|
|
|
|
static void cdiv_clk_disable_hwcg(struct clk *c)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
branch_disable_hwcg(&clk->b);
|
|
}
|
|
|
|
static int cdiv_clk_in_hwcg_mode(struct clk *c)
|
|
{
|
|
struct cdiv_clk *clk = to_cdiv_clk(c);
|
|
return branch_in_hwcg_mode(&clk->b);
|
|
}
|
|
|
|
struct clk_ops clk_ops_cdiv = {
|
|
.enable = cdiv_clk_enable,
|
|
.disable = cdiv_clk_disable,
|
|
.in_hwcg_mode = cdiv_clk_in_hwcg_mode,
|
|
.enable_hwcg = cdiv_clk_enable_hwcg,
|
|
.disable_hwcg = cdiv_clk_disable_hwcg,
|
|
.auto_off = cdiv_clk_disable,
|
|
.handoff = cdiv_clk_handoff,
|
|
.set_rate = cdiv_clk_set_rate,
|
|
.get_rate = cdiv_clk_get_rate,
|
|
.list_rate = cdiv_clk_list_rate,
|
|
.round_rate = cdiv_clk_round_rate,
|
|
.is_local = local_clk_is_local,
|
|
};
|